Subwoofer Speakers

• Revolutionary mounting design mountsdirectly and rigidlyto the studs in standard 2" x 4" wallswith no wall modification necessary.
• 10" driver capable of very low and accurate frequency response (single voice coil unit -- typically 3dB down at 30 Hz).
• Single and dual voice coil versions available with or without crossovers allow for multiple configurations applicable to any type of surround sound -- home theater or normal sub/sat type systems.
• Attractive design.
• Twin ported designoptimally tunedfor standard residential walls.
• 25 - 200 Hz
• 150 watts
• 87 dB @ 1W/m
• 8 Ohms nominal
• Cut-out dimensions: 14 1/2"W x 16 1/2"H
• Overall dimensions: 19 1/2"W x 19 1/2"H
• Face relief: 1 3/4"

If you use a single in-wall subwoofer, use the dual-voice-coil version (SE10SWD). It connects to both the left and right signals from your amplifier. If you plan to use two subwoofers (left and right), use two of the SE10SW versions.

If your stereo has separate low-pass speaker-level outputs for the subwoofer, you will not need an additional crossover. If not, you will need two crossovers (MX10's); One for each channel.