Altronix Timers
6030
Multi-Purpose Timer |
|
- 6 or 12VDC field selectable operation
- 5 AMP, 120VAC / 28VDC SPDT relay contacts
- Quick and extremely accurate time range adjustment from 1 second to 60 minutes
- LED indicates relay is energized
- Timing starts when power is applied
- Unit resets when power is removed or when (+) shorted to (TRG)
- Form "C" Relay Contacts
- Board Dimensions: 3"L x 2.5"W x 1.25"H
- Applications: Delayed dialer/transmitter or local alarm. Bell or siren cutoff
-
Installation Instructions(PDF)
| |
|
6062
Full Function Timer |
|
- 12 or 24VDC field selectable operation
- 8 AMP, 120VAC / 28VDC SPDT relay contacts
- Quick and extremely accurate time range adjustment from 1 second to 60 minutes
- LED indicates relay is energized
- Triggered by application of positive (+) voltage, dry contact closure, or release of contact closure
- Selectable relay activation at the start or end of the timing cycle
- Selectable one second momentary relay activation at the end of the timing cycle (eliminates the need to use 2 timers for this function)
- Built-in reset feature which cancels timing cycle
- Repeat pulser/flasher mode
- Form "C" Relay Contacts
- Board Dimensions: 3"L x 2.5"W x 1.25"H
- Applications: Dialer or Radio Transmitter Delay-Bell or Siren. Cut-Off-Delayed Local Alarm-Exit Delay Timer-Timed Door. Strike-Bell Pulser or Light Flasher. Guard Tour Supervisory Timer
-
Installation Instructions(PDF)
| |
|
PT724
Seven Day / 24 Hour Event Timer |
|
- 12 to 24 Volts AC or DC field selectable operation
- 10 AMP, 120VAC / 28VDC SPDT relay contacts
- 10mA (standby), 40mA (energized)
- Dimensions: 6.75"L x 3"W x 1"H
- EE prom memory prevents loss of programming due to power failure
- Accurate crystal controlled microprocessor "real time" clock with battery backup
- Programmable for up to 27 individual or 189 block events
- Selectable events can be momentary and/or latching
- CR2032 battery required for memory backup (not included)
-
Installation Instructions(PDF)
| |
|
|
