Motion & Light Sensors for AC Control

• Sensitivity Adjustment
• Time-Delay From 6 Sec to 30 Minutes
• Floodlights Respond To Remote On/Off Commands
• 120V, 500W Max Floodlight
• 110° by 40 Foot Coverage

• Sensitivity Adjustment
• Time-Delay From 6 Sec to 30 Minutes
• Floodlights Respond To Remote On/Off Commands
• 120V, 300W Max Floodlight
• 110° by 40 Foot Coverage

The Outdoor Motion Monitor can turn on up to 8 different devices inside/outside your home so you'll not only scare off intruders with light, but notify people inside your home that something or someone is lurking outside.

In addition to turning on dual floodlights when the detector picks up motion, the Outdoor Motion Monitor can turn on up to four X10 modules in or around your home based on motion. It also includes a light sensor which can turn up to four additional X10 modules at dusk and off again at dawn. Security and convenience applications for this product are endless. Activate indoor or outdoor lighting, or sound the Remote Chime to alert you when someone approaches.

The Outdoor Motion Monitor is completely weatherproof and can be used with incandescent or halogen bulbs rated for 150W. The floodlights can also be turned on manually from an X10 transmitter. When it is turned on manually, the floodlights stay on and the motion detection is temporarily disabled until the floodlights are turned off from an X10 transmitter.

Gray. Bulbs not included.

• You can easily disable the dawn/dusk feature so it will work 24 hours/day! No need to cover photo-cell with black tape.
• It has adjustable time delay! You can set the delay from 1 minute to 255 minutes! Now you can have the flexibility to have your lights, appliances, or even Macros turn off just 60 seconds after you leave the room (The old version had only 1 setting of 6 minutes)

The Hawkeye II Motion Sensor sends wireless Radio Frequency (RF) signals to an X10 Transceiver or any X10 security system base receiver. The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring.

These signals are then received by X10 lamp, appliance, or wall switch modules to control lights (or appliances) around the home.

If you set the Hawkeye II Motion Sensor to a unique code (Housecode A and Unit Code 1), then walk into the room where the Hawkeye II Motion Sensor is located, a lamp module set to "A1" will turn on. As long as you keep moving, the light will stay on, and when you stop moving, the light turns off after the amount of time you select.

The signals transmitted onto your house wiring can also be received by the CM11A two-way Computer Interface (included with ActiveHome) to initiate macros. The CM11A then performs a sequence of events that you've set it up to do.

Normally the Hawkeye II Motion Sensor will turn on an X10 module set to its code, however when used with the CM11A 2-way Computer Interface (ActiveHome) the Hawkeye II Motion Sensor becomes much more powerful. Instead of turning on a module set to A1, you can set A1 to initiate a macro that performs a sequence of events. For example you enter the room, the table lamp can turn on and dim to 70%, and the stereo can turn off 30 minutes later.

Built in photocell works like a watchful eye and will turn lights on and off at dusk and sunrise. This will save you energy as it only detects motion in the dark.

Features: Up to 20' ft range. Motion Sensor is 2.5 x 2.5 inches. (it's small so you can place them almost anywhere!)

• Don't confuse this unit with the cheap units available in hardware and home stores! Ratings, specs, features, and reliability way beyond consumer grade devices!
• Uses elegant Decora-styled wallplate (not included).
• Will operate with electronic balasts.
• Conforms to California Title 24, UL & CSA cert.
• 180° field-of-view, 2700 sq. ft. coverage.
• Direct replacement for a single pole wall-switch.
• Selectable operation settings:
  • Automatic ON/Automatic OFF for maximum convenience.
  • Manual ON/Automatic OFF for maximum energy savings.
• Three modes, delay control, and ambient light adjustment.
• Ideal for kitchens, bathrooms, hallways, garages, basements, and storage rooms.
• Ratings: Incancescent: 600W @120V. Flourescent: 1200VA @ 120V, 2400VA @ 277V, 2000VA @ 347V. Motor: 1/4 HP @ 120V or 240V. Minimum: 40W @ 120V, 85W @ 277V. For 50/60 HZ AC only.
• Specification Sheet(PDF)

• Manual-ON/Automatic OFF operation in accordance withCalifornia Title 24 2005 requirements
• Low-Profile design eliminates an obtrusive "scanning device" look. Elegant Decora styling compliments any interior and coordinates with leviton's popular line of Decora wiring devices
• 180 degree field-of-view provides approximately 900 square feet of coverage suitable for bathrooms, basements, garages, utility rooms and a variety of other residential areas
• Convenient push-button provides Manual ON/OFF light switching at any time
• Segmented fresnel lens provides optimum sensitivity and performance. It is designed with an extensive "minor motion" area where even slight body movements will be detected
• Horizontal field of view may be adjusted between 180 and 32 degrees of arc by using internal blinders located on either side of the lens
• Four optional manual adjustments for delayed-OFF time settings maximize energy savings: 30 seconds (for walking test), 10 minutes, 20 minutes and 30 minutes
• LED Indicator Light flashes when sensor detects motion to verify detection is active
• Unit can be used for 120V lighting. Compatibile with both electronic and magnetic ballasts
• Relay switches at zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
• Fits in standard wallbox and replaces single-pole wall switch
• Requires a neutral (white) wire connection
• UL Listed and CSA Certified, complies with California Title 24 2005 Energy Code and FCC regulations
• Five-Year Limited warranty
• Instruction Sheet(PDF)