X10 & Leviton Home Automation Wireless Controllers

RF to PowerLine Transceivers
Leviton Universal Transceiver
All House Code Transceiver

Hand-Held Wireless Controllers
Keychain Remote Control w/Bright/Dim
Keychain Remote Control
16 Device Wireless Controller
Stick-On Wall Switch

Related Links
Main Index
Controller Index
Plug-In Controllers
Wall-Mount Controllers

• Includes RR501 transciever and HR12A Palm-Pad remote.
• Wireless remote control sends RF commands to turn on, turn off, brighten, and dim up to 16 unique devices.
• Transceiver receives RF commands and transmits X10 powerline commands to other modules (optional, not included.)
• Outlet on RR501 responds to one address. (Non-dimming.)
• RF Range: up to 100'
• Battery operated transmitter requires 4AAA batteries (not included).

• Includes TM751 transciever and KR19A keychain remote.
• Wireless remote control sends RF commands to turn on, turn off, brighten, and dim up to 2 unique devices.
• Transceiver receives RF commands and transmits X10 powerline commands to other modules (optional, not included.)
• Outlet on TM751 responds to one address. (Non-dimming.)
• RF Range: up to 40'
• Battery operated transmitter requires CR2025 Lithium 3V battery (included).

• Accepts RF (radio frequency) DHC and X-10 commands from all DHC and X-10 RF controllers.
• Retransmits commands to the powerline.
• Retransmits ON, OFF, DIM, BRIGHT, ALL LIGHTS ON, and ALL UNITS OFF commands.
• Includes silent 300W max outlet settable to any house/unit code!
• Local outlet can be controlled via RF, powerline signals, and the program button on the unit.
• Transceiver relays all 16 house codes!
• Includes Intellisense technology.
• More Info and Specs (PDF)

• Receives all 256 house/unit code addresses
• External antenna package for extended range
• Custom house & unit code filtering via configuration program
• Filtering settings are not lost during power loss

By offering this product with an external antenna and a state-of-the-art receiver, users are achieving impressive ranges with ordinary X10 transmitters like key chain remotes, motion sensors and palm pad remotes.

An internal 310Mhz receiver detects incoming RF signals generated by X10 compatible remote devices: palm pad remotes, key chain remotes, HawkEye motion detectors, and many others. These signals are filtered by an optional user defined list of allowed house and unit codes. The enabled signals are sent to a TW523, PSC05 or Powerlinc power line interface module, which then broadcasts the X10 commands down the power line to receiving modules (X10 light switch modules, lamp modules, appliance modules, etc.).

• Provides convenient wireless ON/OFF and BRIGHT/DIM control of two sequential addresses.
• User-programmable for any two sequential addresses.
• Range of up to 75 feet from HCPRF-1TW, RR501, or TM751 transceiver.
• Uses long-life 3V CR2032 lithium battery.
• Recessed buttons reduce the chance of accidental operation.
• New rugged slim case.
• Same as X-10 KR19A keychain controller.
• New programming instructions (PDF)

• Provides convenient wireless ON/OFF control of two sequential addresses.
• User-programmable for any two sequential addresses.
• Range of up to 75 feet from HCPRF-1TW, RR501, or TM751 transceiver.
• Uses long-life 3V CR2032 lithium battery.
• Recessed buttons reduce the chance of accidental operation.
• New rugged slim case.
• Replaces Cat. No. 6332 keychain controller.
• More Info and Specs (PDF)

• Controls up to 16 devices, including bright and dim commands.
• Requires a transceiver (RR501, TM751, HCPRF-1TW) to operate.
• Requires 4 AAA batteries (not included.)
• Same as X-10 / X10 / HR12A / HR-12A / 16 Plus / Palm Pad

• Plugs into an AC outlet.
• Extends range of RF equipment.
• Works for all X-10 RF equipment except PowerMid.
• This item is identical to the discontinued SR731.

• Plugs into an AC outlet.
• Converts infrared signals into X-10 powerline signals.
• Manual controls on console.

• All 256 house/unit code addresses
• All regular X10 RF commands (on, off, dim, brighten, etc.)
• Extended RF commands, such as those transmitted by X10's “Entertainment Anywhere” remotes and X10 security modules such as the DS10.

The W800RF32 then sends these commands directly to your computer's serial(RS232)port. This allows your computer to receive X10 RF commands from remotes and motion detectors directly, without having to broadcast any power line commands, thus minimizing power line clutter and improving home automation response times by bypassing the usual power line delay.

To use the W800RF32 you will need a dedicated computer (PC or Mac) to interpret the received commands.