This 'strap' fits standard Decora wallplates and takes up one 'gang'. The two 'F' connectors allow easy connection to two RG-6 coaxial cable to take a high-quality S-Video signal long distances through the walls.

Automatically Switch Between Local and Whole House Stereos

The ABW enables safe switching between two amplifiers automatically. The ABW passes through amplifier A when amplifier B is off. When amplifier B turns on, its signal takes precedence and is routed to the speakers.

Ideal for bedroom and den installationswhere a single pair of in-wall speakers is used by both the local and whole house stereo systems.

TV Power Amplifier with Automatic Switch

The Auto Amp 15 enables you to use a single pair of in-wall speakers to safely play sound from both a whole house system and a local television. Both the TV (or other audio source with line-level audio output) and the whole house system connect to the Auto Amp 15 (typically hidden behind the TV). When the television is off, the whole house music system is automatically routed to the speakers with pure direct pass-through. When someone turns on the TV, the Auto Amp 15 automatically disconnects the music system and turns on the built-in high-current TV power amplifier.

Now enjoy your television in stereo with real power pushing your in-wall speakers! When the TV is turned off, the music system is re-connected to the in-wall speakers automatically.

Keep it simple with our CAT-5 Driver Series A/V distribution plates that allow you to run audio and video signals over affordable CAT-5 wiring for distance up to 500 feet! By utilizing the latest in low noise amplification, signals stay crystal clear with virtually no signal degradation. Simply mount the transmitter plate by your gear and the receiver plate by the television.

Keep it simple with our CAT-5 Driver Series A/V distribution plates that allow you to run audio and video signals over affordable CAT-5 wiring for distance up to 500 feet! By utilizing the latest in low noise amplification, signals stay crystal clear with virtually no signal degradation. Simply mount the transmitter plate by your gear and the receiver plate by the television.

Keep it simple with our CAT-5 Driver Series A/V distribution plates that allow you to run audio and video signals over affordable CAT-5 wiring for distance up to 500 feet! By utilizing the latest in low noise amplification, signals stay crystal clear with virtually no signal degradation. Simply mount the transmitter plate by your gear and the receiver plate by the television.

Keep it simple with our CAT-5 Driver Series A/V distribution plates that allow you to run audio and video signals over affordable CAT-5 wiring for distance up to 500 feet! By utilizing the latest in low noise amplification, signals stay crystal clear with virtually no signal degradation. Simply mount the transmitter plate by your gear and the receiver plate by the television.

Keep it simple with our CAT-5 Driver Series A/V distribution plates that allow you to run audio and video signals over affordable CAT-5 wiring for distance up to 500 feet! By utilizing the latest in low noise amplification, signals stay crystal clear with virtually no signal degradation. Simply mount the transmitter plate by your gear and the receiver plate by the television.

For those that want a very unobtrusive, super-high-quality infrared receiver intheir ceiling, nothing can beat this device! A super-wide acceptance range and overall range make placement easy, and compatible outputs makes it very easy to wire into any standard infrared distribution system.

Just drill a 1" hole in the sheetrock, connect the wires (use our super-B's for the fastest and most reliable connections) and press the unitinto place. Flexible ribs hold the unit in place.

Use this fader control when you have two pairs of speakers wired to the same zone. Connect the run from the amp to a standard impedance matching volume controlfirst, jumper from the volume control to this fader, then from the fader to thespeakers. The volume control will control overall volume, and the fader will let you adjust the relative sound level throughout the room.

Have you ever been frustrated trying to set up a system and having the emitter overpower its intended target? Time spent trying to find the 'sweet spot' on a component not onbly costs you money, but can also make for unreliable infrared performance.

Audioplex has solved this signal strength problem with the introduction of the Adjustable IRBug*. By simply turning the adjustment screw, you can fine tune the signal strength of the emitter to perfectly match any component inyour system!

Available in both hard-wire and plug-in versions, you can now feel confident that you are always sending the perfect signal.

Have you ever been frustrated trying to set up a system and having the emitter overpower its intended target? Time spent trying to find the 'sweet spot' on a component not onbly costs you money, but can also make for unreliable infrared performance.

Audioplex has solved this signal strength problem with the introduction of the Adjustable IRBug*. By simply turning the adjustment screw, you can fine tune the signal strength of the emitter to perfectly match any component inyour system!

Available in both hard-wire and plug-in versions, you can now feel confident that you are always sending the perfect signal.

Flooding IR Emitter simplifies systems where two or three components are placedin one shelf and can be flashed with the ultra-powerful IRFloods. Mount in front, above, below or on the side of the components, the IRFlood saturates each component in the shelf space.

The revolutionary and patented IRPrism is an Audioplex exclusive. This unique product is placed over the front of A/V component's IR sensors, will reflect incoming signals from your repeater system's emitters placed at the side, top or bottom of the units. IRPrisms attach directly to components via their self-adhesivestick pad. Get rid of unsightly emitter wires running across the front of high-end gear and improve off-axis remote control response in open cabinets with the IRPrism!

I use the Little Amp to boost the subwoofer output of my home theater system before going into the powered subwoofer. Previously, the signal was not high enough (even when turned all the way up in the processor settings) to drive the subwoofer properly. Works fantastic!

Also available in a board only version. (Requires 12VDC power supply.)

Converts any stereo signal (left and right channel) to a mono signal. Can be placed anywhere between the amplifier outputs and the speaker you wish to operate mono.

You can use this device and 1/2 of a pair of regular speakers INSTEAD of a special "stereo" speaker.

The MicroMount IRTarget, utilizing Stealth IR technology, is one of the smallest IRTargets residing completely in a thin, tubular enclosure. Both Talk back andStatus LED's are built-in for confusion free operation

Great for use with second zone line level outputs to control a whole house amplifier, or in applications using a single source when the level needs to be remote controlled. By using a universal remote control, all the essential commands are available such as volume up, volume down, and mute. Additionally a smart volume up and down infrared control sequence makes precise level control possible. Push the up/down remote buttons in a staccato fashion and the level jumps up or down in quick steps, hold down the button continuously and a slow ramp function engages. This allows you to quickly ramp to the desired level, and then fine tune without over or undershooting.

The RCLL-1 is Audiophile quality, with no semi-conductors in the signal path resulting in a flat, noise free signal. The stylish chassis blends unobtrusively into any decor and features an auxiliary chassismounted volume control. Like most of the Audioplex product line, the RCLL-1 is hand crafted in the USA in our own factory and comes with a Lifetime Warranty! Remote Control Required (sold separately)

Finely adjust each room's volume via our pop-free twelve step slide switch technology. The SLVC200 is rated at 72 watts RMS / 216 watts audio.

Designed for performance, the SLVC Series slide volume controls offer attenuation of 34 dB with a frequency response of 35Hz to 20kHz.

Tri-filar wound volume controls provide an easier load to your amplifier...extending the life of your system. Creatively combining resistive and reactive characteristics into the design, Audioplex's hand wound autoformers incorporate far more turns than any other manufacturer.

Finely adjust each room's volume via our pop-free twelve step slide switch technology. The SLVC75 is rated at 25 watts RMS / 75 watts audio.

Designed for performance, the SLVC Series slide volume controls offer attenuation of 34 dB with a frequency response of 35Hz to 20kHz.

Tri-filar wound volume controls provide an easier load to your amplifier...extending the life of your system. Creatively combining resistive and reactive characteristics into the design, Audioplex's hand wound autoformers incorporate far more turns than any other manufacturer.

See if you can detect it! This compact unit is designed to act as a remote receiver and processor of infrared signals.

The STEALTH IR is a clever product that decouples the actual IR photo-transistor (sensor) from the electronics necessary to make use of its output. The sensor itself is attached to the end of a thin black 6' cable. This cable plugs into the control box (Audioplex calls this box a 'processor'.)

I have a small TV in my bedroom mounted on a Vogels stand attached to the wall. I stuck the STEALTH control box to the back of the TV (double-sided tape included) and routed the IR pickup under the TV to the front. The pickup sits between the TV and the Vogels mount and you can't even see it unlessyou look very closely. I put a plug on the Xantech wires I already had in placeand plugged it into the control box. Worked perfectly the first time.