Everybody wants to know what's new at HomeTech! On this page you can see our recent arrivals. Some of these items are so new that we don't have a picture or description loaded yet. Please call if you have any questions.

This optional speaker can be wired to the main unit in order to hear the chime in another room. Up to two auxiliary speakers can be wired to the main iChime unit. It is in the same housing as the iChime itself, but with the electronics removed. No batteries required.

The RFI-E is the crossing point which receives the EnOcean RF signals and translates them into UPB powerline technology. Up to eight PulseWorx RF devices can be programmed in each RFI-E.

The RFI-E, Radio Frequency Interface is a plug-in interface that receives a discreet RF code from any EnOcean enabled device. Each RF code is translated into a UPB signal which is transmitted on the existing powerline. This allows control from any location with any optional EnOcean RF switch, Hand-held Key Fob remote or Occupancy Sensor

The RFI-E can accept Enocean commands from 8 independent devices. Each signal can be programmed to transmit any UPB command. The button Mode may be customized with separate actions for single tap, double tap, press and hold, release.

The Occupancy Sensor covers an area of 1500 sq. ft. and has a built-in solar panel that allows ambient or sunlight to power itself. It will operate up to 48 hours without light, optional batteries may be required for continuous operation. Buy using a multi-zone lenses this sensor will respond to any source of moving heat, with in range, which crosses from one zone into another zone. Heater vents will not trigger the sensor.

The Radio Frequency Remote provides a durable 4 button handheld for remote activation control of PulseWorx devices. Available in Black, White and Silver.

Universal Tilt Mount for 37" to 63" flat panels

The UT-PRO310 adjustable universal tilt mount is designed for large flat panel displays up to 200lbs (91kg). The adjustable "Touch and Tilt"® range is -10 to 20 degrees. The self-locking "Touch and Tilt" adjustment allows simple "hands only" movement of the screen, even when in place on the wall. Wall attachment is to two or three wood studs up to 32" apart or in a 32" concrete span.

Another miniature IR receiver that features surface mount technology. The 490 has its electronics housed in a brass cylinder. The "business end" of the unit isa small round lens. This small receiver is designed to be placed in very tiny spaces. One example is a small corner of an equipment cabinet. A single, 1/2-inchhole will accommodate the 490. The high sensitivity of this receiver gives you the ability to place the 490 further away from the hand held remote, increasing the placement options you have.

490-00 490W-00 Standard Micro Link Standard version, with mini 3-conductor 7 ft. ribbon cable and separate screw terminal block (supplied). 490-00 has brass bezel, 490W-00 has white bezel.

490DW-00 Decora Micro Link J-box version of the 490W-00. Includes a whitedecorator style insert for single gang mounting. See illustration.

490-30 490W-30 Quick connect version of the 490-00. Seven-foot cable with 3.5mm stereo mini plug permits direct plug-in to Xantech Connecting Blocks that have an 'IR RCVR' or 'AUX' jack, such as the CB12, CB20, CB60, 789-44, 791-44, etc.490-30 has brass bezel, 490W-30 has white bezel.

490-95 Plasma friendly version. Rejects interference from plasma displays, direct sunlight and fluorescent tube lights for accurate IR signal reception. 2.5' deep (64mm). Includes a CB12 Connecting Block.

490-95KIT Plasma friendly kit version. This kit offers everything you need to set up a IR receiver and control any 4 devices. It includes the following: 789-44 Connecting Block, 283M 4 blink IR emitters, 490-95 IR receiver, 781RG Power supply.

The Radio Frequency Wall Switches are a set of wireless/battery-less devices designed to control your PulseWorx lighting system remotely. The Wall Switches provide both single and dual wall mounted rocker switch control to areas where AC power is not conveniently available.

The RFWS are available in two versions, a single rocker style and a dual rocker style, both fit in a standard decorator style wall plate and junction box. The dual rocker version has the function of two dimmers in one unit. Developed for indoor use, however if installed in a weatherproof box and the addition of the silicone cover enables a variety of other options for control.

Available in white, light almond, ivory, black and brown will match any decor.

This is a stand-alone detection system that announces the arrival of every vehicle in the driveway through audible alerts strategically placed both in and outside the home. A second, 15 watt relay will turn on up to 1800 watts of lights at night. It also triggers CCTV, RF and satellite transmitters, etc.

Additionally, the CF-2C provides a relay output for any sensing device that has a N.O., dry, floating relay contact (passive infrared, microwave, etc.). Add as many and as varied sensors as you like to a single system.

With several adjustments and a sounder that interacts with its features, this is the most versatile detection system available in the market today. With an average 12-15 year field life, it is also the most dependable full-featured system available.

The CT-A1 Sounder is an indoor sounder that installs in a single-gang electric box. Works in
conjunction with both CT-2B and CF-2C control units.

Three Buttons On Plate interact with lights and sensor when used with the CF-2C control unit:
MANUAL ON: Puts lights on timer
RESET: Turns lights off if they have not timed out
EXIT DELAY: Turns sensor probe off so car can pass by and not trip the system (if late p.m. or early a.m.)

(Note: these three buttons are non-functional when used with the CT-2B control unit.)

This version works well when mounted on the inside of outward swinging doors.

10 dB Gain Amplifier, DC/IR Passing, Bi-directional 5-42 MHz return path, 54-1000 MHz forward path

The VideoEase Component Video/Stereo Audio Balun (500058) allows one component video (YPbPr or RGB) signal and one (1) Stereo Audio channel to be transmitted via one (1) Cat5E/6 twisted pair cable for more cost-efficient cabling. The product features Ground Loop Coupling (GLC) to help eliminate "hum" bars. Used in pairs, the Component Video/Stereo Audio Balun supports high-definition resolution and true left/right stereo audio for hi-fidelity commercial and residential AV applications.