The EZ-MXA20 is a stereo mixer amplifier with one mic input and two line inputs. Bass and treble tone controls are included. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. The EZ-MXA20 is used in houses of worship, restaurants, clubs, meeting rooms and commercial sound systems.
| Inputs (3) | 1.2 k ohms balanced on XLR jack, mic-level, -55 dBu Min. (fo |
| Gain | Off to 74 dB (mic), Off to 32 dB (line) |
| Outputs (2) | Left and Right, 10 Watts RMS into 8 Ù per channel or 8 Watts |
| Equalization | ±10 dB @ 10 kHz, ±9 dB @ 80 Hz |
| Frequency Response | 50 Hz to 20 kHz (±1.5 dB, mic input, 10 Watts), 35 Hz t |
| THD+N | < 0.25% |
| CMRR | > -55 dB (mic) |
| Crosstalk | < -68 dB (1 kHz, line input) |
| Phantom | Switch-selectable 24 V (IEC 1938: 1996-12) |
| Noise | < -70 dB (below 10 Watts, -10 dBV line input), < -65 dB (bel |
| 24 Vdc power supply current | 170 mA (idle), 1000 mA (max.) |
| Power supply input voltage | 100 to 240 VAC |
| Warranty | 3 Years; contact RDL technical support department for assist |
| Case dimensions | 5.75" (14.6 cm) W x 5" (12.7 cm) D |
| Mounting size | 1/3 rack width |
| UPC EZ-MXA20 | 813721010001 |