RDL 20 Watt Stereo Audio Amplifier
Description
The EZ-PA20 is a stereo audio amplifier with one line input and a front-panel volume control. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. The EZ-PA20 is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms and commercial sound systems.
Features
- Audio Amplifier with Front-Panel Level Control
- 10 Watts RMS Per Channel into 8 O
- 8 Watts RMS Per Channel into 4 O
- Switch-Selectable Load Impedance on Rear Panel
- Unbalanced Line Input on RCA Jacks
- Switch-Selectable Mono or Stereo Mode
- Integral Overload Limiter with LED Indicator
- Limiter Controls Overloads from Clipping
- Limiter Produces Output Level Comparable to Higher Power Amps
- Mono Mode Switch Sums Left and Right Inputs
Specifications
| Input | > 10 kÙ, -10 dBV nominal on RCA jacks, -13 dBV Min. (for 10 |
| Gain | Off to 32 dB |
| Outputs (2) | Left and Right, 10 Watts RMS into 8 Ù per channel or 8 Watts |
| Frequency Response | 35 Hz to 20 kHz (±1.5 dB, 10 Watts) |
| THD+N | < 0.25% |
| Crosstalk | < -68 dB (1 kHz) |
| Phantom | Switch-selectable 24 V (IEC 1938: 1996-12) |
| Noise | < -70 dB (below 10 Watts) |
| 24 Vdc power supply current | 160 mA (idle), 1000 mA (max.) |
| Power supply input voltage | 100 to 240 VAC |
| Warranty | 3 Years; contact RDL technical support department for assist |
| Case dimensions | 5.75" (14.6 cm) W x 5" (12.7 cm) D |
| Mounting size | 1/3 rack width |
| UPC EZ-PA20 | 813721010018 |
