HomeTech Solutions' Logo
TechNews
New product info and special deals.
Bookmark and Share
Your Order
View Cart
Checkout
Status
Login
LEARNING CENTER
Knowledge Base
Incredible selection. Credible help.
HOME
NEW PRODUCTS
SPECIALS
MOST POPULAR
SUPPORT
Products Manufacturers
Drapery Control Gift Ideas Weather & Clocks Xantech Specials
Low Price Guarantee Icon
Order:
888-257-4406
HomeTech Solutions Cupertino CA
Map
Directions
Hours
Phone: 408-257-4406
Fax: 408-257-4389
Other Contact Info
Cable Coax DSL HDMI IR Leviton Plate Quickport Speaker Splitter Switch Video Wall Wire
Preamps
(10139)
Pre-Amplifiers for whole-house audio

Audio preamplifiers take a line level audio signal (usually left + right analog audio) and tweak it. They may split it to multiple line level signals, switch the output to one of several sources, raise or lower the volume level, mute, etc.

They do not boost the signal level to speaker level audio; then they would be called an amplifier, not a preamp.


RP41AV
Remote Preamp
The RP41AV is a fully functional infrared remote controlled audio/video preamp,replacing the RP41. Volume, Bass, Treble, Balance and Mute functions, plus A/V switching, provide all the functions needed for multi-room systems. It features a low noise, low distortion design with greatly increased headroom capability, for highest audio and video performance. The 'flat pack' design addresses the need for reduced space requirements as multi-room, multi-zone systems grow in complexity.
Hide
  • 4 separate line level A/V inputs, simply labeled 1, 2, 3, and 4, accessed in any order from the RC68X Hand-Held Remote/Programmer's infrared commands.
  • Separate Volume (Up/Down), Balance (Left/Right), Bass and Treble controls feature continuous adjustment in 2 dB steps, in either direction, all IR controlled.
  • Balance, Bass, and Treble controls have a Flat function (on the RC68X) for instant return to flat response for any previous setting.
  • Separate Mute On and Mute Off fuctions are included so that you can give a positive command without knowing what the status is. This is very helpful in remote
  • areas when all adjustments are made 'blind' without any visual aids for status.
  • IR control input port connects to the emitter output of Xantech devices, allowing remote control from keypads, IR receivers, connecting blocks, etc.
  • Tone controls allow individual 'EQ' of each room in multi-zone installations.
Loading real-time item data...

RP41AV

RGC11
Remote Gain Control Module
  • Remote controlled line level gain control.
  • Ramping volume and/or preset level adjustments.
  • Separate mute on and off.
  • Loop-through jacks for 'daisy chaining' multiple RGC11's.
  • Selectable IR code groups.
  • Useful for controlling multiple power amplifiers from a single preamp.
  • Gain: Unity @ Max. V.C. Freq. Response: 5 Hz to 70 kHz+3dB. THD: Requires RC68X Programmer IR codes for operation.
  • Can also be controlled by MIRV1.
  • Includes AC power supply.
  • Dimensions: 5 7/8' x 2 3/4' x 1 5/8'
Hide
Loading real-time item data...

RGC11

EZ-HDA4A
2 Pics
Headphone Distribution Amp, Front Outputs
The EZ-HDA4A contains four stereo headphone amplifiers with individual front-panel volume controls. Headphone outputs are provided on front-panel MINI jacks. One stereo input signal feeds all the amplifiers. Stereo RCA jacks, a MINI jack and a 1/4" jack are provided for connecting the input source. The EZ-HDA4A is used in music stores, houses of worship, studios, museums, home component systems and commercial sound systems.
Hide
  • One Stereo Input to Four Stereo Outputs
  • Unbalanced Inputs on Rear Panel
  • Input on MINI, 1/4" (6.3 mm) or RCA Jacks
  • Headphone Outputs on Front Panel
  • Outputs on MINI Jacks
  • Front-Panel LEVEL Control for Each Output
  • Gold-Plated RCA Input Connectors
  • Each Output is Driven Separately
  • Knobs for Easy Level Adjustment
Inputs (3)Stereo on dual RCA jacks, stereo mini jack or 1/4" (6.3 mm)
Level controlOff to +2.5 dB gain (RCA and 1/4" inputs, 100 Ù output load)
Outputs (4)Stereo on Mini jacks (front panel), 60 mW (100 Ù load)
Frequency Response20 Hz to 50 kHz (±1.5 dB)
THD+N< 0.1% (10 mW output, 100 Ù load)
Crosstalk< -75 dB (1 kHz)
Noise< -95 dB (below 10 mW output, 100 Ù load, maximum gain)
24 Vdc power supply current40 mA (idle), 65 mA (max.)
Power supply input voltage100 to 240 VAC
Warranty3 Years; contact RDL technical support department for assist
Case dimensions5.75" (14.6 cm)W x 3" (7.6 cm)D
Mounting size1/3 rack width
Loading real-time item data...

EZ-HDA4A

EZ-HDA4B
2 Pics
Hedphone Distribution Amp, Rear Outputs
The EZ-HDA4A contains four stereo headphone amplifiers with individual front-panel volume controls. Headphone outputs are provided on front-panel MINI jacks. One stereo input signal feeds all the amplifiers. Stereo RCA jacks, a MINI jack and a 1/4" jack are provided for connecting the input source. The EZ-HDA4A is used in music stores, houses of worship, studios, museums, home component systems and commercial sound systems.
Hide
  • One Stereo Input to Four Stereo Outputs
  • Unbalanced Inputs on Rear Panel
  • Input on MINI, 1/4" (6.3 mm) or RCA Jacks
  • Headphone Outputs on Front Panel
  • Outputs on MINI Jacks
  • Front-Panel LEVEL Control for Each Output
  • Gold-Plated RCA Input Connectors
  • Each Output is Driven Separately
  • Knobs for Easy Level Adjustment
Inputs (3)Stereo on dual RCA jacks, stereo mini jack or 1/4" (6.3 mm)
Level controlOff to +2.5 dB gain (RCA and 1/4" inputs, 100 Ù output load)
Outputs (4)Stereo on Mini jacks (front panel), 60 mW (100 Ù load)
Frequency Response20 Hz to 50 kHz (±1.5 dB)
THD+N< 0.1% (10 mW output, 100 Ù load)
Crosstalk< -75 dB (1 kHz)
Noise< -95 dB (below 10 mW output, 100 Ù load, maximum gain)
24 Vdc power supply current40 mA (idle), 65 mA (max.)
Power supply input voltage100 to 240 VAC
Warranty3 Years; contact RDL technical support department for assist
Case dimensions5.75" (14.6 cm)W x 3" (7.6 cm)D
Mounting size1/3 rack width
Loading real-time item data...

EZHDA4B

EZ-HDA6
2 Pics
Headphone Distribution Amp, 6 Outputs
The EZ-HDA6 contains six stereo headphone amplifiers with individual front-panel volume controls. Headphone outputs are provided on rear-panel 1/4" jacks. One input signal feeds all the amplifiers. Stereo RCA jacks, a MINI jack and a dual 1/4" jack (for "loop out" connection) are provided for connecting the input source. The EZ-HDA6 is used in music stores, houses of worship, studios, museums, home component systems and commercial sound systems.
Hide
  • One Stereo Input to Six Stereo Outputs
  • Unbalanced Inputs on Rear Panel
  • Input on MINI, 1/4" (6.3 mm) or RCA Jacks
  • LOOP OUT Jack for 1/4" (6.3 mm) Input
  • 1/4" (6.3 mm) Headphone Outputs on Rear Panel
  • Front-Panel LEVEL Control for Each Output
  • Gold-Plated RCA Input Connectors
  • Each Output is Driven Separately
  • Knobs for Easy Level Adjustment
Inputs (3)Stereo on dual RCA jacks, stereo mini jack or 1/4" (6.3 mm)
Stereo input LOOP OUT on 1/4" (6.3 mm) TRS
Level controlOff to +2.5 dB gain (RCA and 1/4" inputs, 100 Ù output load)
Outputs (7)Stereo on 1/4" (6.3 mm) TRS (6, rear panel), 60 mW (100 Ù lo
Frequency Response20 Hz to 50 kHz (±1.5 dB, 100 Ù load)
THD+N< 0.1% (10 mW output, 100 Ù load)
Crosstalk< -75 dB (1 kHz)
Noise< -95 dB (below 10 mW output, 100 Ù load, maximum gain)
24 Vdc power supply current50 mA (idle), 80 mA (max.)
Power supply input voltage100 to 240 VAC
Warranty3 Years; contact RDL technical support department for assist
Case dimensions5.75" (14.6 cm)W x 3" (7.6 cm)D
Mounting size1/3 rack width
Loading real-time item data...

EZ-HDA6

Graphic Element
Knowledge Base
Tutorials
Seminars
Books & Videos
FAQ Icon
KB Article
Follow us on Twitter
Follow us on Facebook
Our videos on YouTube
RSS Feed

In Business Since 1992 Icon Satisfaction Guarantee Icon Same Day Shipping Icon Privacy Policy Icon Low Price Guarantee Icon Tech Home Icon

site map | resale info | employment | contact us | SUPPORT
Text and images copyright © 1992-2010 HomeTech Solutions. All rights reserved.
[Thu 07/29/10 10:59:38 PM PDT] Tiny HomeTech Logo HomeTech Solutions is UpFront