Audio volume controls attenuate a speaker or line-level audio signal in order to control the volume.

The VC-302 is an impedance matching volume control with and IR receiver knockout. The knockout allows Channel Vision's IR-2400 to be integrated with the volume control for applications that require IR repeating. The VC-302 comes with white, ivory, and almond knobs, and face plates to easily match other wall plates in the room.

Impedance Matching Rotary Volume Control

Power handling:50 or 100 W/channel RMS
For use with an amplifier of equal or lesser power rating only
Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs)
Almond, Black, Ivory and White Decora inserts and knobs included in box
UL Listed
RoHS compliant

Finely adjust each room's volume via our pop-free twelve step slide switch technology. The SLVC200 is rated at 72 watts RMS / 216 watts audio.

Designed for performance, the SLVC Series slide volume controls offer attenuation of 34 dB with a frequency response of 35Hz to 20kHz.

Tri-filar wound volume controls provide an easier load to your amplifier...extending the life of your system. Creatively combining resistive and reactive characteristics into the design, Audioplex's hand wound autoformers incorporate far more turns than any other manufacturer.

Great for use with second zone line level outputs to control a whole house amplifier, or in applications using a single source when the level needs to be remote controlled. By using a universal remote control, all the essential commands are available such as volume up, volume down, and mute. Additionally a smart volume up and down infrared control sequence makes precise level control possible. Push the up/down remote buttons in a staccato fashion and the level jumps up or down in quick steps, hold down the button continuously and a slow ramp function engages. This allows you to quickly ramp to the desired level, and then fine tune without over or undershooting.

The RCLL-1 is Audiophile quality, with no semi-conductors in the signal path resulting in a flat, noise free signal. The stylish chassis blends unobtrusively into any decor and features an auxiliary chassismounted volume control. Like most of the Audioplex product line, the RCLL-1 is hand crafted in the USA in our own factory and comes with a Lifetime Warranty! Remote Control Required (sold separately)

Use this fader control when you have two pairs of speakers wired to the same zone. Connect the run from the amp to a standard impedance matching volume control first, jumper from the volume control to this fader, then from the fader to thespeakers. The volume control will control overall volume, and the fader will let you adjust the relative sound level throughout the room.

I use the Little Amp to boost the subwoofer output of my home theater system before going into the powered subwoofer. Previously, the signal was not high enough (even when turned all the way up in the processor settings) to drive the subwoofer properly. Works fantastic!

Also available in a board only version. (Requires 12VDC power supply.)

Finely adjust each room's volume via our pop-free twelve step slide switch technology. The SLVC75 is rated at 25 watts RMS / 75 watts audio.

Designed for performance, the SLVC Series slide volume controls offer attenuation of 34 dB with a frequency response of 35Hz to 20kHz.

Tri-filar wound volume controls provide an easier load to your amplifier...extending the life of your system. Creatively combining resistive and reactive characteristics into the design, Audioplex's hand wound autoformers incorporate far more turns than any other manufacturer.