|
|
Order:
888-257-4406
HomeTech Solutions
Cupertino CA
Phone: 408-257-4406
Fax: 408-257-4389
|
|
Keypad for Simplese-D
- Addressable keypad for Nuvo Simplese.
- Built-in IR Receiver.
- Includes White, Almond, and Ivory faceplates.
Hide
Loading real-time item data...
NV-A4DKP-DC
Local Source Input Module
Local source interrupt allows an amplified source signal to be played through the local in-wall or in-ceiling speakers.
Hide
- For use with the NuVo Simplese or Essentia System.
Loading real-time item data...
NV-LSI12
Simplese D 4-Source, 4-Zone
The New Simplese home audio system brings you the advanced Generation D technology of superior home sound together with a sleek, slim new look, and the simplicity of user-friendly design-all at a price that's easy to live with. Now your whole family can experience NuVo's startlingly clear, multi-source home sound withthe New Generation D Simplese, our most affordable and simple home sound systemyet.
Hide
- Four Sound Sources
- Four Listening Zones
- Capacity for expansion up to eight zones
- Generation D design protocol with Digital Amplification for cooler, more efficient operation with higher power output
- Built-in amplification, 30 watts per zone
- 56 Khz and 38 Khz modulation outputs for better compatibility with source equipment
- Trim-line, 6,1/2 pound chassis takes up less vertical space in rack
- Unique Allport wiring system means fewer wires to clutter installation
- Built-In IR receiver in each keypad
- Keypad control for bass and treble adjust per zone
- Auto loudness boosts high and low frequencies at low volume levels for a better listening experience
- Mute function immediately silences system for phone or doorbell rings
- Local source interrupt to dedicate a local audio source to a zone
- Rotary address selector for easy zone addressing with no programming required
- New Simplese amplifier (Generation D design)
- Four NV-A4DKP keypads with white, almond, ivory and black inserts and trim plates for each
- One NV-A4DRC1 remote with batteries
- Four NV-VEC IR emitters
- One NV-A4DAP Allport multi-port connection hub
- One NV-A4DAPC Allport cable
- REM1U Rack Ear Mounts
Loading real-time item data...
NVA4DS-DC A4DSCP
Mute Interface Adaptor
Telephone/doorbell mute interface transfers a voltage signal from two doorbellsand two phone lines to the NuVo amplifier's external mute input. When either the doorbell or phone rings, the system will mute if audio is playing.
Hide
- Works with any NuVo system.
- Includes cable that runs from the MI1 to the NuVo system.
Loading real-time item data...
NV-MI1
Allport Tester for Simplese
The Allport Wire Tester is a tool that can be used to verity the correctness ofthe Wire connections between the Allport and the keypads and speakers in different rooms in the house. This tool is to be used after a complete pre-wiring has been completed. This consists of an Allport with all speaker wires and CAT5 cables connected, but with no speakers, keypads, or amplifiers connected to the system.
Can also be used as a standalone CAT5 tester.
Hide
- Identifies, tests, and checks polarity of all speaker runs.
- Test keypad connections.
Loading real-time item data...
AWT1
Spkr to Line Level Converter
For use with the NuVo Simplese System, this plug-in module reduces the speaker output to a line-level signal for use with an external amplifier, such as the NuVo NV-P2100.
Hide
Loading real-time item data...
NV-KA1
Learning Remote
NuVo's Learning Remote Control, with over 1,000 pre-programmed source codes, is capable of controlling up to six additional devices in addition to your NuVo whole home audio system.
Hide
- Preprogrammed and learning remote control.
- Built-in features control Nuvo systems.
- Controls up to six sources/devices.
- Macros: Up to 32 keystrokes x 8 macro buttons x 6 banks
Loading real-time item data...
LRC1
HiFi 4 Zone, 4 Source Kit
Hi-Fi Main Board Assembly with 4 installed Zone Amplifier Cards in an Enclosure. Also comes with 4 Remote Input Modules (RIM), 4 Volume-Source Controls (VSC), Power Supply, Remote Control, and a cable for an HAI Omni Home Control System or Lumina Lighting Control System.
This 4 zone, 4 source kit is available for structured wiring enclosures using HAI Part Number 62A00-2.
Hide
- Also comes with:
- 4 Remote Input Modules
- 4 Volume-Source Controls
- Power Supply
- Remote Control
- Cable for an HAI Omni Home Control System or Lumina Lighting Control System.
Loading real-time item data...
62A00-1
HiFi Expansion Kit
Includes:
*4 Zone Amplifier Cards
*2 Remote Input Modules w/ 2 IR Flashers
*4 Volume and Source-Control (VSC) Units
*Power Supply that powers 4 zone amplifiers
*Manual
Hide
- Adds an additional 4 zones of audio and 2 audio sources throughout your home.
- Modular Zone Amplifier Cards plug into the Hi-Fi Main Board Assembly.
- Remote Input Modules (RIM) and Volume-Source Control (VSC) Units connect using Standard Cat5 Wiring.
Loading real-time item data...
62A12-1
|
