PCS / PulseWorx UPB Load Dimmer Controller 8-Button
Description
The KPLD Keypad Load Dimmer is an all-in-one Keypad Controller and Light Dimmer in a single package. This new line of controllers incorporates the functionality of the famous Pulseworx KPC Keypad Controllers plus a 400W Dimmer Switch.
The KPLD can transmit and receive UPB digital commands over the existing electrical wiring to remotely turn ON, OFF, and dim its own lighting load as well as trigger dramatic scenes throughout the home.
OPERATION
The Keypad Load Dimmer is capable of being a member of up to 16 links or scenes. Scenes allow you to control a single light or multiple lights with one button. Program each button to trigger a different scene, control specific lights or your whole house. Lights will ramp to a desired brightness level at a rate from .8 seconds to 1 hour. Certain lights can dim slowly while others turn off instantly, all controlled with a press of a button.
The dimmer portion is pre-programmed with 7 preset scenes
with a light level to create inviting moods right out of the box. The Dimmer controls incandescent lights, low-voltage halogen, magnetic or dimmable electronic transformers. There is also the capability to set the KPLD to a non-dimming mode in order to control such loads as fluorescent lights.
Programming the pushbuttons will allow different UPB commands for each of four events: single-tap, double-tap, hold and release. The operation of the LEDs can also be configured to extinguish other LEDs when it is illuminated to minimize confusion about which scene is activated. Furthermore each LED can illuminate when an On-type command is transmitted or received and it can extinguish when an Off-type command is transmitted or received or vice versa. The 6-Button version has six back-lit horizontal pushbuttons as well as a vertical rocker
pushbutton. The 8-button has eight horizontal pushbuttons. Each horizontal button can be custom engraved (minimal charge) for ease of use and to add beauty and functionality to any room.
The KPLD is a wire-in wall mounted device. Installation is simple - just mount in a wall box and connect to line and neutral.
Easy to Configure
Like all PulseWorx devices, the KPLD can be initially configured using PCS's free UPStart Software setup tool. UPStart enables configuring such parameters as Network Name, Network ID, Unit ID, Room name, Device name, default on light levels, fade rates, LED colors, dimming disable, auto shut-off time, etc. as well as test the operation and communication strength of the device.
Colors
Available in six different colors to match any decor.
-------------------------------------------------------------------------------
All PCS products are completely "Made in USA" .
UPStart has the option to configure an entire network off-line and then download the information into the devices after they are installed in the home.
PulseWorx Lighting Control System
The Keypad Controllers are designed to be an integral part of a complete PulseWorx Lighting Control System. Like all PulseWorx devices, the KPLD uses the patented UPB™ power line communication technology (invented by PCS) to reliably communicate with any other UPB-compatible device(s) over the existing house electrical wires. No new wires are necessary making PulseWorx perfect for retrofit situations. When initial configuration is complete, a single push of a button is all you need to activate any group of lights (or virtually anything else that connects to AC power wiring) throughout the house simultaneously.
The KPLD can transmit and receive UPB digital commands over the existing electrical wiring to remotely turn ON, OFF, and dim its own lighting load as well as trigger dramatic scenes throughout the home.
OPERATION
The Keypad Load Dimmer is capable of being a member of up to 16 links or scenes. Scenes allow you to control a single light or multiple lights with one button. Program each button to trigger a different scene, control specific lights or your whole house. Lights will ramp to a desired brightness level at a rate from .8 seconds to 1 hour. Certain lights can dim slowly while others turn off instantly, all controlled with a press of a button.
The dimmer portion is pre-programmed with 7 preset scenes
with a light level to create inviting moods right out of the box. The Dimmer controls incandescent lights, low-voltage halogen, magnetic or dimmable electronic transformers. There is also the capability to set the KPLD to a non-dimming mode in order to control such loads as fluorescent lights.
Programming the pushbuttons will allow different UPB commands for each of four events: single-tap, double-tap, hold and release. The operation of the LEDs can also be configured to extinguish other LEDs when it is illuminated to minimize confusion about which scene is activated. Furthermore each LED can illuminate when an On-type command is transmitted or received and it can extinguish when an Off-type command is transmitted or received or vice versa. The 6-Button version has six back-lit horizontal pushbuttons as well as a vertical rocker
pushbutton. The 8-button has eight horizontal pushbuttons. Each horizontal button can be custom engraved (minimal charge) for ease of use and to add beauty and functionality to any room.
The KPLD is a wire-in wall mounted device. Installation is simple - just mount in a wall box and connect to line and neutral.
Easy to Configure
Like all PulseWorx devices, the KPLD can be initially configured using PCS's free UPStart Software setup tool. UPStart enables configuring such parameters as Network Name, Network ID, Unit ID, Room name, Device name, default on light levels, fade rates, LED colors, dimming disable, auto shut-off time, etc. as well as test the operation and communication strength of the device.
Colors
Available in six different colors to match any decor.
-------------------------------------------------------------------------------
All PCS products are completely "Made in USA" .
UPStart has the option to configure an entire network off-line and then download the information into the devices after they are installed in the home.
PulseWorx Lighting Control System
The Keypad Controllers are designed to be an integral part of a complete PulseWorx Lighting Control System. Like all PulseWorx devices, the KPLD uses the patented UPB™ power line communication technology (invented by PCS) to reliably communicate with any other UPB-compatible device(s) over the existing house electrical wires. No new wires are necessary making PulseWorx perfect for retrofit situations. When initial configuration is complete, a single push of a button is all you need to activate any group of lights (or virtually anything else that connects to AC power wiring) throughout the house simultaneously.
Features
- CONTROLLER FEATURES
- Programmable Button Modes
- Each pushbutton can be programmed to control any of over 250 scenes or devices.
- Scene Control
- Pushbuttons can be used to activate its load or scene as well as to adjust the scene's stored light levels.
- Load Control
- The 400W rating can be configured to act as a dimmer or switch.
- Programmable LED Feedback
- LEDs illuminate when ON-type commands are both transmitted or received and extinguish when OFF-type are transmitted or received.
- Aesthetic Design with Keypad Back-Lighting
- The blue lighted oval pushbuttons can be faintly lit to aid in finding the keypad in the dark, are are worthy of high-end installations.
- Easy Installation
- Color-coded white (Neutral), black (Hot), red (Load) leads are provided for direct connection to AC wires.
Photos
