PCS / PulseWorx Lighting Control Panel
Description
LCP-U Lighting Control Panel was developed to simplify the installation of PulseWorx UPB Lighting Control Systems. The LCP-U panel was designed to house up to ten WS1D-24, fifteen WS1D-15, or twenty WS1D-6 dimmers, controlling up to twenty individual circuits and delivering up to 24,000W of power.
All of the above dimmers can each be connected to one or more remote slave switches (with one line-voltage traveler) enabling hard-wired on/off/dimming control of each circuit. All WS1D Dimmers can also control low-voltage magnetic loads, such as outdoor lighting.
The LCP can also accommodate any single, double or four gang devices. This is ideal for new construction.
Using LCP panels to centralize lighting controls offers several distinct advantages:
The cost to design, layout, construct, wire, and program a lighting system is greatly reduced.
The transmission/receiving characteristics of a central-star system are vastly superior to a conventionally wired system.
The LCP is designed to properly dissipate the heat generated by high-power lighting controls.
The finished product using LCP lighting panels results in a professional, rugged, high-quality system.
The PCS UPB™ Lighting Control System allows the designer/installer to implement up to 16 pre-set scenes for each circuit and over 250 scenes per house. When initial configuration is complete, a single push of a button is all you need to activate any group of lights (or control points) simultaneously. Each scene's pre-set lighting levels can be easily adjusted using PCS' innovative programming system (or by using a UPB™ Setup Tool).
All of the above dimmers can each be connected to one or more remote slave switches (with one line-voltage traveler) enabling hard-wired on/off/dimming control of each circuit. All WS1D Dimmers can also control low-voltage magnetic loads, such as outdoor lighting.
The LCP can also accommodate any single, double or four gang devices. This is ideal for new construction.
Using LCP panels to centralize lighting controls offers several distinct advantages:
The cost to design, layout, construct, wire, and program a lighting system is greatly reduced.
The transmission/receiving characteristics of a central-star system are vastly superior to a conventionally wired system.
The LCP is designed to properly dissipate the heat generated by high-power lighting controls.
The finished product using LCP lighting panels results in a professional, rugged, high-quality system.
The PCS UPB™ Lighting Control System allows the designer/installer to implement up to 16 pre-set scenes for each circuit and over 250 scenes per house. When initial configuration is complete, a single push of a button is all you need to activate any group of lights (or control points) simultaneously. Each scene's pre-set lighting levels can be easily adjusted using PCS' innovative programming system (or by using a UPB™ Setup Tool).
Features
- Durable NEMA1 grade construction, made of 16 GA steel with a white powder coat finish.
- Designed to be flush-mounted between two 16 inch center to center studs or surface-mounted on any flat surface.
- 13 knockouts (½ X ¾ combo type) on both the top and the bottom of the unit and 20 knockouts on the rear, for simple wiring
- A locking door with two keys insures against tampering
- Hinged Interior panel can swing 90 degrees out of the enclosure for easy access for wiring the rear of the WS1D Dimmers or other equipment.
- A four-gang Utility Bay is provided for the installation of receptacles, slave switches, or transmitters -- useful for connecting testers or programming devices
Photos
