The 600 Watt UPB™ Dimmer Switch works as a stand-alone dimmer or may be used with Room Controllers, House Controllers, or automation controllers. These switches use heavy duty components like 30 amp triacs and UPB™ communication technologyfor professional strength reliability.

UPB You may change the function of this dimming switch to be non-dimming (or back to dimming) using the HAI UPB™ UPStart configuration software after the switch has been installed.

This switch comes with a default white paddle, connectors, and instructions.

Switch Color Change Kits (HAI Part Number 35A14-color code) are available in White (WH), Almond (AL), Black (BL), Ivory (IV), Brown (BR), and Grey (GR) colors.

The RWS Remote Wall Switch is a high quality auxiliary rocker switch designed to provide three-way or multi-way lighting control to a PulseWorx WS1 Wall Switch Dimmer.

The RWS connects to a Wall Switch Dimmer (WS1D or WS1E) via the yellow "traveler" wire to provide three-way or multi-way control.

Pressing the remote's paddle style rocker switch will cause the WS1 Wall Switch Dimmer (sold separately) to react the same as if its own local rocker switch was pressed. The RWS can be wired as far as 1000 feet away. A blue LED is provided on top of the rocker to find the switch in the dark.

The 600 Watt UPB Non-Dimming Switch works as a stand-alone switch or may be used with Room Controllers, House Controllers, or automation controllers. These switches use heavy duty components like 30 amp triacs and UPB communication technology for professional strength reliability.

You may change the function of this non-dimming switch to be dimming (or back to non-dimming) using the HAI UPB UPStart configuration software after the switch has been installed.

This switch comes with a default white paddle, connectors, and instructions.

Switch Color Change Kits (HAI Part Number 35A14-color code) are available in White (WH),Almond (AL), Black (BL), Ivory (IV), Brown (BR), and Grey (GR) colors.

Single rocker faceplate for many modules and controllers.

Each unit has one switch that controls a single load of up to 900W. All rockers and buttons are transmitters and receivers able to communicate with UPB plug-in modules and/or other UPB devices to control virtually anything.

For other colors, use ZS11* universal faceplate.

For three- and four-way operation, add USR1-40-W or USR-40 slave switches.

The HAI UPB 15A Relay Switch controls non-dimming loads and is ideal for heavier loads or for motors (like ceiling fans) that may hum when used with Dimming or Non-Dimming switches.

This switch comes with a default white paddle, connectors, and instructions.

Switch Color Change Kits (HAI Part Number 35A14-colorcode) are available in White (WH), Almond (AL), Black (BL), Ivory (IV), Brown (BR), and Grey (GR) colors.

Model URD is a wire-in duplex receptacle designed to control the operation of 120VAC appliances and lighting based on digital commands received over the powerline. The receptacle communicates using the highly-reliable Universal Powerline Bus (UPB) technology. UPB devices such as Model URD are easily integrated to provide a flexible, low-cost alternative to hardwired or RF home automation strategies.

Model URD delivers on/off control for lighting and appliances up to 12A. The receptacle fits a standard outlet box and connects directly to the existing household power wiring. Power to the top outlet is controlled by UPB commands, while the bottom outlet is always powered. The device connected to the top outletcan be operated manually using a UPB wall switch or multi-button controller, orautomatically via PC or home automation server.

The KPLD Keypad Load Dimmer is an all-in-one Keypad Controller and Light Dimmer in a single package. This new line of controllers incorporates the functionality of our famous KPC Keypad Controllers and a 400W Dimmer Switch.

The KPLD is available in both 6-button and 8-button versions. It can transmit and receive UPB digital commands over the existing electrical wiring to remotely turn ON, OFF, and dim its own lighting load as well as trigger dramatic scenes throughout the home

Provides 3-way or multi-way ON/OFF or dimming control for these devices:
• SimplyBrilliant™ UPB Dimmer-Controller, models US1 and US2
• UPB Fixture Dimmer and Relay Modules, models UFD & UFR
• UPB Receptacle, model URD-

Dual rocker faceplate for several modules and controllers.

The HAI UPB™ 1000W Switch is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a non-dimming mode (see Configuration Software below) in order to control loads, such as fluorescent lights, that do not belong on a dimming switch.

HLC Products work as stand-alone or with a Home Control System.

An HAI home control system has the ability to change your light settings by the time of day, a set schedule, by the triggering of events (including motion), via a telephone call, Touchscreen, Smartphone, or by a computer connected to the Internet.

The CEM-6 is a custom engraved membrane for the KPCW-6 and KPCD-6 6-Button Keypads. Each membrane button may be tailor labeled depending on which font; the font size between 2 and 19 characters may be etched on each button.

(Special Order)

Remote switch with faceplate. Same as USR-40 plus ZS11-W.

The KPLD Keypad Load Dimmer is an all-in-one Keypad Controller and Light Dimmer in a single package. This new line of controllers incorporates the functionality of the famous Pulseworx KPC Keypad Controllers plus a 400W Dimmer Switch.

The KPLD can transmit and receive UPB digital commands over the existing electrical wiring to remotely turn ON, OFF, and dim its own lighting load as well as trigger dramatic scenes throughout the home.

OPERATION

The Keypad Load Dimmer is capable of being a member of up to 16 links or scenes. Scenes allow you to control a single light or multiple lights with one button. Program each button to trigger a different scene, control specific lights or your whole house. Lights will ramp to a desired brightness level at a rate from .8 seconds to 1 hour. Certain lights can dim slowly while others turn off instantly, all controlled with a press of a button.

The dimmer portion is pre-programmed with 7 preset scenes
with a light level to create inviting moods right out of the box. The Dimmer controls incandescent lights, low-voltage halogen, magnetic or dimmable electronic transformers. There is also the capability to set the KPLD to a non-dimming mode in order to control such loads as fluorescent lights.

Programming the pushbuttons will allow different UPB commands for each of four events: single-tap, double-tap, hold and release. The operation of the LEDs can also be configured to extinguish other LEDs when it is illuminated to minimize confusion about which scene is activated. Furthermore each LED can illuminate when an On-type command is transmitted or received and it can extinguish when an Off-type command is transmitted or received or vice versa. The 6-Button version has six backlit horizontal pushbuttons as well as a vertical rocker
pushbutton. The 8-button has eight horizontal pushbuttons. Each horizontal button can be custom engraved (minimal charge) for ease of use and to add beauty and functionality to any room.

The KPLD is a wire-in wall mounted device. Installation is simple - just mount in a wall box and connect to line and neutral.

Easy to Configure

Like all PulseWorx devices, the KPLD can be initially configured using PCS's free UPStart Software setup tool. UPStart enables configuring such parameters as Network Name, Network ID, Unit ID, Room name, Device name, default on light levels,fade rates, LED colors, dimming disable, auto shut-off time, etc. as well as test the operation and communication strength of the device.

Colors


Available in six different colors to match any decor.

-------------------------------------------------------------------------------

All PCS products are completely "Made in USA" .


UPStart has the option to configure an entire network off-line and then download the information into the devices after they are installed in the home.

PulseWorx Lighting Control System

The Keypad Controllers are designed to be an integral part of a complete PulseWorx Lighting Control System. Like all PulseWorx devices, the KPLD uses the patented UPB™ powerline communication technology (invented by PCS) to reliably communicate with any other UPB-compatible device(s) over the existing house electrical wires. No new wires are necessary making PulseWorx perfect for retrofit situations. When initial configuration is complete, a single push of a button is all you need to activate any group of lights (or virtually anything else that connects to AC power wiring) throughout the house simultaneously.