The controllers on this page send X-10 signals to control devices connected to X-10 compatible modules.

The new Scene Control button sets allow scene control of all modules with Intellisense. The 16450S and 16450SW has four rockers that transmit ON an OFF commands to execute four separate programmed lighting scenes via multiple receivers. The 16450SD and 16450SDW has three rockers that transmit ON and OFF commands to execute three separate programmed lighting scenes. The fourth rocker transmits ALL DIM and ALL BRIGHT commands to programmed receivers.

As the days get shorter, the need for outdoor security increases. A burglar or violent person can use the darkness to hide undetected as they sneak up on someone in your family or break into your home.

The Outdoor Motion Monitor can turn on up to 8 different devices inside/outside your home so you'll not only scareoff intruders with light, but notify people inside your home that something or someone is lurking outside.

In addition to turning on dual floodlights when the detector picks up motion, the Outdoor Motion Monitor can turn on up to four X10 modules in or around your home based on motion. It also includes a light sensor which can turn up to four additional X10 modules at dusk and off again at dawn. Security and convenience applications for this product are endless. Activate indoor or outdoor lighting, or sound the Remote Chime to alert you when someone approaches.

The Outdoor Motion Monitor is completely weatherproof and can be used with incandescent or halogen bulbs rated for 150W. The floodlights can also be turned on manually from an X10 transmitter. When it is turned on manually, the floodlights stay on and the motion detection is temporarily disabled until the floodlights are turned off from an X10 transmitter.

Gray. Bulbs not included.

Gives your home a lived-in look while you're away. Can be set to turn on its floodlights and up to 4 modules when motion is detected. Works with a chime to let you know when someone is outside! Works together with other 6417's set to the same address. Dark brown. Bulbs not included.

Color change kit for HCS10-1SW, HCC10-1SW, HCC1A-1SW.

These controllers provide manual ON/OFF control of 1 to 4 addresses in sequence. For example, if address code A1 is selected, a 16450-4 can transmit commands to addresses A1, A2, A3, and A4. Controllers with an 'A' suffix use one button for ALL LIGHTS ON and ALL UNITS OFF. Controllers with a 'D' suffix use one button for BRIGHT and DIM. All 16450 series faces require a 16400 body. The 16400 wireseasily into a standard wallbox using attached 6 inch black and white leads. Indicators show the last command from any controller.

This hard-to-find device converts infrared codes into X-10 powerline codes! Works with 'One-For-All 4' and larger style pre-programmed remote controls, X-10 infrared remote controls, and our newHome Theater remote control. Allows turning any unit of one house-code on and off. As well as brightening and dimming, and all on and all off.

Color Change Kits for 4 Address Decora Home Controls DHC Controller

Color Change Kits for 1 Address Decora Home Controls DHC Controller

DHC 4 Address, ON/OFF, GROUP DIM/BRIGHT Wall Mounted Dimming Switch, Green Line, 2-Way Communication - White

Lets you control up to 16 modules at the touch of a button from anywhere in thehouse. Lets you 'group' lights to turn on and dim together. No wiring necessary--just plug it in!

XPMT4 Mini-Timer can store 'ON' and 'OFF' times daily for installed Receiver Modules 1-8 in any configuration totaling 64 events. Manual Control is available for up to eight X10 addresses plus All Lights ON/All Units OFF.

The X10 PRO Mini Timer controls up to 8 X10 PRO Modules automatically or instantly. You can have your outside lights as well as inside lights and appliances go on and off at preset times to give your home a lived-in look while you are away.

You can program your Modules to go on and off at the same time every day or you can set your radio to wake you up "Once" only, for an early morning flight. There is even a "Security" Mode that automatically varies your programmed time each day so your home doesn't look like it's controlled by a timer.

You can keep the Mini Timer by your bedside and it will wake you up on weekdays. It has a snooze featureso you can sleep a while longer and you can turn the alarm off on weekends.

You can manually turn off your child's radio or night light from your bedside. You can turn on ALL lights connected to Lamp Modules and Wall Switch Modules withthe touch of a button if you hear a suspicious noise at night. You can even turn off everything in the system with one button.