|
|
Order:
888-257-4406
HomeTech Solutions
Cupertino CA
Cable Coax DSL HDMI IR Leviton Plate Quickport Speaker Splitter Switch Video Wall Wire
|
|
(10489) Plug-In Modules Offer Simple Installation
Appliance Mod 2/3 pin Grounded
Plug either of these modules into an outlet, then plug a radio, fan, fluorescent light, small air conditioner, etc. into the outlet on the module. Now you can turn the device on and off from anywhere in the home. You can still turn the device on and off with its power switch. The AM466 has a ground pin, the AM486 doesnot.
Hide
- On/Off Control
- Local Control
- White Case
- 120V, 15A, 1/3H.P., 500W (lamps)
- Controls fans, radios, lights, etc.
- Responds To ON, OFF, and ALL UNITS OFF.
Loading real-time item data...
PAM02 AM486
Lamp Module
Plug one of these modules into an outlet, then plug a lamp into the outlet on the module. Now you can turn the lamp on and off, and dim it to any level, from anywhere in the home. You can still turn the device on and off with its power switch.
Hide
- On/Off/Dim Control
- Local Control
- White Case
- 120Volts, 300Watts
- Incandescent Loads Only
- Responds To ON, OFF, BRIGHT, DIM, ALL LIGHTS ON, and ALL UNITS OFF.
Loading real-time item data...
PLM01
Remote Chime
- Pleasant sounding chime
- Works with all X10 controlers
- Works with outdoor motion dectectors
- Works with the Active Home System
Hide
Loading real-time item data...
PHH02
Two-way appliance module
This is a two-way version of the traditional X10 appliance module (2 pin) that has some new features that users have been asking about for years. With the new two-way feature, computer interfaces that can generate 'Status Request', will receive an X10 signal back from the appliance module indicating it's status, ON or OFF. The new two-way module is much more sensitive to the X10 signal. It was able to receive and react to X10 signals at 50 mV, whereas normal X10 modules need100 mV of signal strength.
Hide
- Two-way operation
- On/Off Control
- Local Control
- White Case
- 120V, 15A, 1/3H.P., 500W (lamps)
- Controls fans, radios, lights, etc.
- Responds To ON, OFF, and ALL UNITS OFF.
Loading real-time item data...
AM14A/PAM21
Lamp Module,300 W, Scene Capab
Decora Home Controls (DHC) Scene-Capable Dimming Plug-In Lamp Module with One-Button Programming Provides one-button programming through address capturing. Provides manual and remote ON/OFF switching and remote full-range dimming for plug-in incandescent lamps. No wiring necessary; plugs into 15 Amp AC outlet.
Allows local control of any lamp plugged into it. Available in White only. Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers.
Equipped with Leviton's Intellisense Technology advanced circuitry for the utmost in reliability, even where electrical "noise" exists on the power line. Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands.
Hide
- 1 button programing
- Soft on/ Fade Off
- Turns on lights to last slected level
- Programable in 1% increments
Loading real-time item data...
HCP03-10W
Powerhorn Mini-Siren & Chime
These piercing, plug-in sirens can be added anywhere around the home. They work with any X10 security system, responding to signals from an alerted main security console. No intruder will hang around when one of sirens sounds!
Hide
Loading real-time item data...
SH10A
Universal Mod (Contact Cls/Bp)
Plug-in low voltage module for switching sprinkler systems, drapery controls, garage door openers. Can be set for momentary or sustained contact closure. Built-in chime for use as annunciator. 5 Amps/24V DC.
Hide
Loading real-time item data...
PUM01
|