Decora Home Controls (DHC) 600 and 1000-Watt Scene-Capable Dimming Wall Switch Receivers with One-Button Programming, 2-Way Communication, and LED Locator and Brightness Display Provide one-button programming through address capturing. Two-way status reporting to status-tracking-capable controllers and programmers (Example: DHC Toscana Programmer).

Single-pole (one location) Provide manual andremote ON/OFF switching and full range dimming for larger incandescent and magnetic low-voltage lighting loads such as chandeliers and multiple high-hats.

Provide Scene Control capability when used with DHC Scene Controller HCCS7-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers for scene control only (Not 2-way communication).

Single-Pole applications ONLY. Unit equipped with Leviton'sexclusive Intellisense™ Technology advanced circuitry for the utmost in reliability, even where electrical "noise" exists on the power line. Packed with Ivory and White snap-on Rocker and Frame Kits. Kits for other colors must be purchasedseparately.

These switches are designed to variably control many kinds of loads, including inductive devices such as fans and low voltage lighting. Replace your existing switches with these modules. Then you can turn the fan or low voltage lights on and off and 'dim' them to any level from the switch. You can also turn on, turn off, and dim the device from a controller. Decora wallplate not included. Reduce rating to 850W/850VA when ganged two together; 700W/700VA when ganged three or more. (The 'heat sink' tabs break off for use when ganged.) For regular (non-three-way) applications, use one 6343 or 16383-WI. For three- and four-way applications, use one 6343 or 16383-WI and one MS00R10* slave switch for each additional switch location.

Color Change Kits for Mural Dimmer

Top outlet provides ON/OFF control in response to controller command signals. Bottom outlet is continuously live. Local control of any light of appliance plugged into the controlled outlet can be achieved by switching the load ON/OFF switch once or twice. Will not respond to ALL LIGHTS ON command. Fits standard wall boxes and supplied with leads for easy installation. Rated: 15A 120V 60Hz AC only. NEMA 5-15R

Scene capable wallswitch. Available in 600 watt and 100 watt versions.

These switches are designed to variably control many kinds of loads, including inductive devices such as fans and low voltage lighting. Replace your existing switches with these modules. Then you can turn the fan or low voltage lights on and off. You can also turn on and off the device from a controller. Decora wallplate not included. For regular (non-three-way) applications, use one 16293WI. Forthree- and four-way applications, use one 16293WI and one MS00R10* slave switchfor each additional switch location.

Equipped with Intellisense (gated automatic gain control). Top outlet provides ON/OFF control in response to controller command signals. Bottom outlet is continuously live. Local control of any light of appliance plugged into the controlled outlet can be achieved by switching the load ON/OFF switch once or twice. Will not respond to ALL LIGHTS ON command. Fits standard wall boxes and supplied with leads for easy installation. Available in Ivory (-I), White (-W), Almond (A). Rated: 15A 120V 60Hz AC only. NEMA 5-15R

Replace existing wall switches with these modules. (All it takes is a screwdriver.) You can still turn the light on and off from the switch. And you can turn the light on and off from anywhere in the home. You can also dim the light to any desired level from any controller with BRIGHT and DIM buttons.

Use the WS467 to replace regular (non-three-way) light switches.

These switches are designed to control devices that you can't 'dim', such as pumps and fluorescent lights. Replace your existing switches with these modules and you can turn the device on and off from the switch as well as turn it on and off from a controller. Decora wallplate not included. For regular (non-three-way)applications, use the 6291-WI. For three- and four-way applications, use one 6293-WI and one 6294-I (ivory) or 6294-W (white) slave switch for each additional switch location.

Equipped with Intellisense (gated automatic gain control). Same as 6227, but with both top and bottom outlets providing ON/OFF control in response to controller command signals. Feed-through load lead allows control of receptacles downstream. Will not respond to ALL LIGHTS ON command. No local control available. Available in Ivory (-I), White (-W). Rated: 15A 120V 60Hz AC only. NEMA 5-15R

Replace existing wall switches with these modules. (All it takes is a screwdriver.) You can still turn the light on and off from the switch. And you can turn the light on and off from anywhere in the home. You can also dim the light to anydesired level from any controller with BRIGHT and DIM buttons. Use the WS4777 to replace both switches of a three-way light switch.

This switches are designed to control 220V devices that you can't 'dim', such as pumps. Replace your existing switch with this module and you can turn the device on and off from the switch as well as turn it on and off from a controller. Decora wallplate not included.

Equipped with Intellisense (gated automatic gain control). Provides ON/OFF control. No local control available. Wires easily into standard wallbox using supplied six-inch leads. Will not respond to ALL LIGHTS ON command. Available in Ivory (-I), White (-W). Rated: 20A 250V 60Hz AC only. NEMA 6-20R

DHC 15 Amp, 120 Volt AC 60Hz, Multi-Location Remote, 3-Way and 4-Way, Switch Receiver with , 1-Way Communication

DHC 20 Amp, 120 Volt, NEMA 5-20R, Single Receptacle Receiver, 1-Way Communication

Incandescent dimming module.

Single-pole (one location) Decora Home Controls (DHC) 8 Amp Scene Capable Electronic Wall Switch Receiver with One-Button Programming and 2-Way Communication Provides manual and remote ON/OFF switching for larger incandescent, fluorescent,compact fluorescent and magnetic low-voltage lighting loads such as chandeliersand multiple high-hats.

Provides one-button programming through address capturing. Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer.

It is also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers. Single-Pole applications ONLY. Equipped with Leviton's Intellisense Technology advanced circuitry for the utmost in performance and reliability, even where electrical "noise" exists on the power line.

Packed with Ivory and White snap-on Rocker and Frame Kits.

Responds to ON, OFF, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands. Rated: 120V 60Hz, 1000W Incandescent, 1000VA Fluorescent and Magnetic Low-Voltage Lighting ONLYNote: This the HXS08-1TW used to be part number HCS08-1TW.