IR Receivers pickup the infrafred remote control pointed at them and repeat it, through wires and a connecting block, to infrared emitters that reproduce the signal.

See our: IR Reciever Tutorial

The easiest receiver to hide. The 2-piece design allows the IR sensor to be located where it is nearly invisible, while the electronics section can be hidden behind the TV or other components.

The Hidden Link IR Receiver is a small shelf-top infrared repeater assembly. It includes an IR receiver and a CB12 Connecting Block. The Hidden Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the "IR RCVR" jack on the CB12. It can also be plugged into the "AUX" or "IR RCVR" jack of other Xantech connecting blocks, such as the models 789-44, CB60, and 791-44. The Hidden Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7 -foot cable - as when installing the Hidden Link IR Receiver in a cabinet where the controlled equipment is behind closed doors.

Miniature IR receiver that features surface mount technology. The 480 Dinky Link was originally developed in response to requests from many of our custom installers for a small, inconspicuous receiver. It was designed for placement in verytiny spaces. One example is between the grille and baffle board of an in-wall speaker. The high sensitivity of this receiver gives you the ability to place the480 behind a grille and still receive the IR commands up to 20 feet away. If longer range is necessary, you must drill a 3/8-inch hole in the grille.

480B-00 480W-00 Standard version. Mini 3-conductor 7 ft. ribbon cable and separate screw terminal block (supplied).

480B-30 480W-30 Quick connect verison. Seven-foot cable with 3.5mm stereo mini plug permits direct plug-in to Xantech Connecting Blocks that have an 'IR RCVR' or 'AUX' jack, such as the CB12, CB20, CB60, 789-44, 791-44, etc

480-85B 480-85W LCD/CFLfriendly version. The 480-85 has an adjustable carrier frequency to providegreat immunity to CFL type infrared interference including that from LCD television monitors and direct sunlight.

480-95B 480-95S 480-95W Plasma friendly version. The 480-95 is a plasma friendly version of the 480 series Dinky Link IR receivers. It is specifically designed to have a greater immunity to plasma emissions.

480B-KIT 480W-KIT This kit offers everything you need to set up a IR receiver and control any 4 devices. It includes the following: 789-44 1-Zone 4-Out Connecting Block, 283M 4 blink IR emitters, 480x-30 CFL friendly IR receiver, 781RG Power supply.

48085KITB 48085KITW This kit is the same as above 480B-KIT with a 480-85 LCD friendly receiver. The receiver looks the same for all 480 kits.

480-95KITB 480-95KITS This kit is the same as above 480B-KIT with a 480-95 plasma friendly reciver.

This standard size, 1/2" diameter, high performance voltage regulated repeater tube installs easily with a built-in terminal block connector. Tube repeaters offer many installation options to achieve a clean and uncluttered look.

This IR receive r is designed to mount in a single-gang electrical J-box. The mounting screws and red lens insert allow the installer to use decorator-style wall plates.

780-10 Standard version. IR freq. bandwidth: 30-100 kHz. Reception range: > 30 ft.

780-80 CFL friendly version. Specifically designed to have great immunity to CFL-type infrared interference and to have exceptional IR reception range. In addition, the 780-80 will operate in direct sunlight! IR freq. bandwidth: 30 - 60 kHz. Adjustable IR carrier freq: 32 to 56 kHz. Nominal reception range: > 70 feet.

780-95 Plasma friendly version.

Multi-Room Infrared (IR) Repeater System

The IR Repeater System consists of three pieces: an IR Target, IR Emitter and a distribution block for distributing control signals to multiple emitters. The IR Target takes the signal from a remote control for an audio/video component, such as a DVD player or home theater receiver, and converts it to a low-voltage electrical signal for use over long distances and in different rooms. The electrical signal is converted backat the component to be controlled by the IR emitter. With such a set-up, a usercan control a DVD player down in the family room from an upstairs bedroom, for example. The IR Repeater System is highly useful with multi-room audio/video distribution.

The IR Target easily installs in a ceiling or wall, and connects with Category 5 cable to the IR Emitter. A separate IR Emitter (47621-MIE) is used for each controlled A/V component, through the distribution block in the Structured Media Enclosure. Distribution block (Cat. No. 47689-B) available separately.

This infrared receiver is compatible with other systems such as Xantech and Buffalo.

Another miniature IR receiver that features surface mount technology. The 490 has its electronics housed in a brass cylinder. The "business end" of the unit isa small round lens. This small receiver is designed to be placed in very tiny spaces. One example is a small corner of an equipment cabinet. A single, 1/2-inchhole will accommodate the 490. The high sensitivity of this receiver gives you the ability to place the 490 further away from the hand held remote, increasing the placement options you have.

490-00 490W-00 Standard Micro Link Standard version, with mini 3-conductor 7 ft. ribbon cable and separate screw terminal block (supplied). 490-00 has brass bezel, 490W-00 has white bezel.

490DW-00 Decora Micro Link J-box version of the 490W-00. Includes a whitedecorator style insert for single gang mounting. See illustration.

490-30 490W-30 Quick connect version of the 490-00. Seven-foot cable with 3.5mm stereo mini plug permits direct plug-in to Xantech Connecting Blocks that have an 'IR RCVR' or 'AUX' jack, such as the CB12, CB20, CB60, 789-44, 791-44, etc.490-30 has brass bezel, 490W-30 has white bezel.

490-95 Plasma friendly version. Rejects interference from plasma displays, direct sunlight and fluorescent tube lights for accurate IR signal reception. 2.5' deep (64mm). Includes a CB12 Connecting Block.

490-95KIT Plasma friendly kit version. This kit offers everything you need to set up a IR receiver and control any 4 devices. It includes the following: 789-44 Connecting Block, 283M 4 blink IR emitters, 490-95 IR receiver, 781RG Power supply.

For those that want a very unobtrusive, super-high-quality infrared receiver intheir ceiling, nothing can beat this device! A super-wide acceptance range and overall range make placement easy, and compatible outputs makes it very easy to wire into any standard infrared distribution system.

Just drill a 1" hole in the sheetrock, connect the wires (use our super-B's for the fastest and most reliable connections) and press the unitinto place. Flexible ribs hold the unit in place.

The MicroMount IRTarget, utilizing Stealth IR technology, is one of the smallest IRTargets residing completely in a thin, tubular enclosure. Both Talk back andStatus LED's are built-in for confusion free operation

See if you can detect it! This compact unit is designed to act as a remote receiver and processor of infrared signals.

The STEALTH IR is a clever product that decouples the actual IR photo-transistor (sensor) from the electronics necessary to make use of its output. The sensor itself is attached to the end of a thin black 6' cable. This cable plugs into the control box (Audioplex calls this box a 'processor'.)

I have a small TV in my bedroom mounted on a Vogels stand attached to the wall. I stuck the STEALTH control box to the back of the TV (double-sided tape included) and routed the IR pickup under the TV to the front. The pickup sits between the TV and the Vogels mount and you can't even see it unlessyou look very closely. I put a plug on the Xantech wires I already had in placeand plugged it into the control box. Worked perfectly the first time.