A high-efficiency power supply specified to provide power to all Xantech IR products. A versatile plug has a locking indentation ring providing a secure connection to all Xantech IR connecting blocks. A small form-factor allows tighter installation and reduces a clumsy rack-installation.

Former part number: 781RG

The Power Distribution Module conveniently converts a single AC or DC input into nine individual outputs to centrally power Video Cameras, PIRs, Photobeams, etc. Each output is protected with 250mA auto-resetting PTCs to protect any shorted output from disabling the other outputs. The module has visual LED power indicators on each output and a Master Power On/Off Switch with LED on the input. Themodule requires a 6 to 30 volt AC or DC power source (not included) which connects either to a terminal block or a 2.1mm DC power jack located on the module. Outputs can be combined for more current.

The DC power distribution module is a unique solution to the need for high quality electrical power for the separated DC powered components in the structured media center (SMC). This module reduces clutter and opens up space in the SMC by eliminating the need for multiple DC transformers. Powered by a single DC power supply, the power distribution module provides fully-regulated 12VDC power for up to 6 devices.

Perfect also for powering multiple cameras and modulators!The DC power distribution module is a unique solution to the need for high quality electrical power for the separated DC powered components in the structured media center (SMC). This module reduces clutter and opens up space in the SMC by eliminating the need for multiple DC transformers. Powered by a single DC power supply, the power distribution module provides fully-regulated 12VDC power for up to 6 devices.

Perfect also for powering multiple cameras and modulators!

The DC Camera Power Distribution Kit conveniently powers up to nine (9) 12 VoltDC cameras. Each camera output is protected with a 250mA auto-resetting PTC to protect any shorted output from disabling the other outputs. The PD9 module has visual LED power indicators on each output and a Master Power On/Off Switch withLED on the input. Outputs can be combined for more current. Kit includes: (1) Power Distribution Module (ELK-PD9) and (1) 12 Volt DC plug-in Power Supply (EL-P1216).

The ELK-P624 is a general purpose regulated power supply and battery charger. It is ideal for alarm, access control, and CCTV applications requiring up to 1 Amp continuous current. Automatic resetting 'fuseless' overload protection means never having to return to a job site to replace a blown fuse

On-board diagnostic LEDs indicate the presence of the AC charging and DC output voltages. The output voltage can be set with a mini-jumper.

The ELK-P412 is a general purpose high current power supply and battery charger. It is ideal for alarm, access control, and CCTV applications requiring up to 4 Amps. The ELK-P412 distributes 12VDC power to three (3) sets of DC power terminals, each having a voltage present indicator LED and automatic resetting overload protection. It also features a master On/Off switch and built-in low battery cut-off to protect the backup battery from deep discharging if AC power is off for an extended time.

A high-efficiency power supply specified to provide power to all Xantech IR products. A versatile plug has a locking indentation ring providing a secure connection to all Xantech IR connecting blocks. A small form-factor allows tighter installation and reduces a clumsy rack-installation.

A bare-bones chunk of iron! And just as reliable! Use this single supply for all your low-voltage AC needs. Connect between an end and the center tap for 12VACand between both ends for 24VAC. Use the 24VAC to power all your thermostats, dampers, and doorbell. Use the 12VAC for all those other devices that need that voltage. For a really slick setup, use with one or more PD9's (below) for distribution.