Remove heat generated by components located in smaller cabinets and entertainment centers. Operating only when needed to minimize dust, this quiet cooling device features an aesthetically designed vent that can be painted to match its environment.

The quiet, internal fan activates automatically when temperatures generated by hot-running equipment reach damaging levels.

New for 2007, we introduce the SEC-1, a complete system for ventilating smaller cabinets up to The SEC-1 consistis of a mounting panel to which two high-quality, virtually silent 80 mm fans are attached, a power supply, a magnetically-held thermal control module, and comprehensive installation instructions.



Installation, covered in detail and illustrated in a comprehensive guide, consists of cutting a rectangular hole for the fan panel, providing a fresh air inlet, placing a magnetically-held thermal switch assembly on top of the hottest-running component, and plugging a wall-type power supply into an AC outlet.



An important feature of the SEC-1 is that it runs continually at a slow speed to deal with the heat dissipation of today's cable boxes and satellite receivers when a home theater system is off, switching to a higher (but very quiet) speed when it's on and equipment temperature rises. Another is the ease with which the thermal control module magnetically attaches to equipment to be monitored. All components of the SEC-1 plug together; no wire cutting, stripping, or soldering is required.

Ideal for amps, receivers and almost anything else that could overheat in your system. They're easy to install; just center the unit above the heat sinks and plug the power supply into an AC outlet. A soothing stream of cool air quietly flows down and between the heat sink fins lowering the temperature to more tolerable levels. The Cool-It is your solution for equipment housed within partially enclosed cabinets. Controlled by a thermal switch, Cool-It II is fully automatic.

Surprisingly, even though satellite receivers are small and consume a small amount of power, they typically run hot and tend to fail because of overheating. Many have almost no ventilation openings. To make things worse, when you think they are turned off, many don't actually shut down completely because they remain on standby and continue to generate heat. The result is unnecessary damage to thereceiver and access cards.

Cool-Sat is your simple and inexpensive insuranceagainst premature satellite receiver failure. Positioned under the receiver, the Cool-Sat sends a gentle stream of cooling air up and through the receiver, assuring a safe operating temperature and longevity. Almost completely silent, thisunit is virtually inaudible beyond three feet. Best of all it adds only 2.5' tothe receiver height. Power consumption is less than 5 watts, making it practical to leave on all the time.

Remove heat from equipment racks located in closets. Larger installations located in closets have greater cooling requirements. The Closet Cooler has been designed to quietly handle the heat produced by a full rack of equipment. Two solid oak vents will be visible and can be stained or painted to match any room's decor.

This cooling solution runs only when needed, mounts to closet doors and isavailable with an active exhaust and passive intake for closets with gaps, or an active exhaust and active intake for tightly sealed closets.

Middle Atlantic Component cooler for AV equipment.

Duct CoolTM is a long pull vent system that allows you to manage the heat in closets quietly and effectively. At the heart of the system is a powerful state-of-the-art mixed flow fan capable of pulling heated air from up to 25 ft. away.

Duct CoolTM features a temperature probe that allows the unit to run only when needed, turning on automatically at 88° and turning off at 85°, further reducing noise. An optional thermostat is offered to provide more control.

The system can be installed easily to exhaust to an attic or crawlspace. Duct CoolTM ships as a complete system and includes all of the hardware necessary for a successful installation.

Save outlets by operating two, three or four fans from a single power outlet with the multiple fan cord. Fan cords are UL Listed and CSA certified.

Featuring smooth, ball bearing design for extra quiet operation, 115V fans mount flush and come in 4-1/2", NEW 6" and 10" models. Hardware and cord included with each unit. AXS-FAN and AXS-FAN-K feature slim profiles for mounting within AXS Series racks.

Made from 18-gauge perforated steel, our washable filter is 1" thick and mounts directly over fans, or it can be used as a filtered vent panel. Black powder coat finish, 3 spaces (5 1/4").

Fitting 4-1/2", NEW 6" and 10" fans, fan guards are "Hamburger grille" style and have a flat black powder coat finish.

The rear doors on our WRK, MRK, and ERK series enclosures are now configurable for enhanced thermal management. These "Selectively Vented Rear Doors" have knockouts at the top and bottom that accept KO- panels like this fan panel.

Our fan panels fit all 4 1/2" fans. 3 rackspaces (5 1/4") high, they are made from 16-gauge flanged aluminum. Offered in a textured black powder coat, or brushed and black anodized finish.

The two rackspace Ultra Quiet Fan Panel System provides smart cooling and monitoring to ensure a reliable installation in areas where fan noise is not an option including boardrooms, classrooms, offices, houses of worship, etc. Proportional speed thermostatic fan control ensures ultra quiet operation by varying fan speed based on enclosure temperature. Overtemp notification, local and remote, offers additional operation monitoring. A unique feature to this system provides notification in the event of fan failure via a local or remote signal to an external alarm device

Quiet fan panel assembly. Available with 1 or 2 fans in a textured or anodized aluminium finish. 3 space, includes fans and grills.

The smart, quiet, elegant way to keep the custom residential electronics systemcool and satisfy the most discriminating clientele. The two rackspace Designer Inspired Ultra Quiet Fan Panel features a unique on-board processor that controls fan speed in direct proportion to equipment temperature resulting in quiet, reliable installations. The perfect thermal management solution for media rooms, screening rooms, and other areas where people and electronics coexist, the Designer Inspired Ultra Quiet Fan Panel boasts the following features: