GigaMax 5e Patch Panels and Blocks come in a variety of port densities to meet the needs of high-speed data applications. The 12-, 24-, 48-, 96-port patch panels feature connectors in groups of six. 16-, 32-, and 64-port patch panels feature connectors in groups of 4. Ideal for enhanced applications and can be used for T568A or T568B wiring configurations. The panels amount in standard 19' equipment racks and accommodate top, bottom or side cable entry.

GigaMax 5e panels and blocks are rated for both channel- and component-level performance.

All panels and blocks are UL Listed; meet National Electrical Code requirements and specifications for UL 1863; and fully comply with the latest published TIA guidelines.

Rear terminations are standard PC-Board mounted AT&T 110 IDC D-4 or D-2contacts. Jacks are 8-conductor non-keyed. Use a 110 punchdown tool for rear connections.

One space Decora panel available to mount up to 4 low-voltage Decora switches, including the RPS, directly onto the rackrail of any standard 19' enclosure

The two rackspace Ultra Quiet Fan Panel System provides smart cooling and monitoring to ensure a reliable installation in areas where fan noise is not an option including boardrooms, classrooms, offices, houses of worship, etc. Proportional speed thermostatic fan control ensures ultra quiet operation by varying fan speed based on enclosure temperature. Overtemp notification, local and remote, offers additional operation monitoring. A unique feature to this system provides notification in the event of fan failure via a local or remote signal to an external alarm device

Flanged for strength, each model is made from 16-gauge steel.
A textured black powder coat finish is used throughout our SB series.

New for 2007, we introduce the SEC-1, a complete system for ventilating smaller cabinets up to The SEC-1 consistis of a mounting panel to which two high-quality, virtually silent 80 mm fans are attached, a power supply, a magnetically-held thermal control module, and comprehensive installation instructions.



Installation, covered in detail and illustrated in a comprehensive guide, consists of cutting a rectangular hole for the fan panel, providing a fresh air inlet, placing a magnetically-held thermal switch assembly on top of the hottest-running component, and plugging a wall-type power supply into an AC outlet.



An important feature of the SEC-1 is that it runs continually at a slow speed to deal with the heat dissipation of today's cable boxes and satellite receivers when a home theater system is off, switching to a higher (but very quiet) speed when it's on and equipment temperature rises. Another is the ease with which the thermal control module magnetically attaches to equipment to be monitored. All components of the SEC-1 plug together; no wire cutting, stripping, or soldering is required.

The smart, quiet, elegant way to keep the custom residential electronics systemcool and satisfy the most discriminating clientele. The two rackspace Designer Inspired Ultra Quiet Fan Panel features a unique on-board processor that controls fan speed in direct proportion to equipment temperature resulting in quiet, reliable installations. The perfect thermal management solution for media rooms, screening rooms, and other areas where people and electronics coexist, the Designer Inspired Ultra Quiet Fan Panel boasts the following features:

Remove heat from equipment racks located in closets. Larger installations located in closets have greater cooling requirements. The Closet Cooler has been designed to quietly handle the heat produced by a full rack of equipment. Two solid oak vents will be visible and can be stained or painted to match any room's decor.

This cooling solution runs only when needed, mounts to closet doors and isavailable with an active exhaust and passive intake for closets with gaps, or an active exhaust and active intake for tightly sealed closets.

This NEW vent panel is the ideal solution for installations where a high open percentage area (64%) vent is needed, and it is desirable to conceal the internal cabling. Includes light blocking material, constructed from 16-gauge perforated steel, flanged for extra strength, and finished in black powder coat.

Our fan panels fit all 4 1/2" fans. 3 rackspaces (5 1/4") high, they are made from 16-gauge flanged aluminum. Offered in a textured black powder coat, or brushed and black anodized finish.

Rear terminations are standard PC-Board mounted AT&T 110 IDC D-4 or D-2 contacts. Jacks are 8-conductor non-keyed. Use a 110 punchdown tool for rear connections. See also our Category 6 patch cords

Quiet fan panel assembly. Available with 1 or 2 fans in a textured or anodized aluminium finish. 3 space, includes fans and grills.

With its aesthetically-balanced, screwless flush-mounted faceplate, our CH chassis features a 16-gauge all-steel body finished in a black powder coat. Front and rear panels are made from 16-gauge aluminum for easy machining. The front faceplate additionally features a brushed and black anodized finish, while the rear faceplate is finished in black powder coat.

Eye-pleasing aesthetics and flat, 11-gauge aluminum construction combine in this easy-to-machine series of blank panels. Black brushed anodized finish.
Now available in Silver, Call to order any size silver panel!

The lightweight, 16-gauge aluminum construction found in the PBL series makes for easy machining. Flanged for extra strength, black powder coat finish.

Steel side panels for 529 series racks.

All your faceplates can be flush with our handy shim tabs. .063 thick, they can be stacked to achieve desired thicknesses. Simply attach them with double-stick tape.

Eliminate the prospect of any tampering with these tough security covers. Offered in large or fine perforation styles (models S and SF respectively), each cover is 1" deep. Includes installed rubber edging that won't mar the equipment you're trying to protect. To enhance the level of security, use our security rack screws.