This system will turn on sounders, cameras, etc. when triggered by a vehicle. Unlike the full-featured system, it does not turn on lights.

125 KHz high security, digitally encrypted, 26-Bit proximity card reader that connects to a serial port on an HAI Home Control System. The reader has durable and scratch resistant polycarbonate housing. Full epoxy potting ensures successful operation even in harsh environments. The Access Control Card Reader can be mounted to metal door frame (mullion) or to any flat wall surface. The two color LED (green and red) and Piezo sounder guarantee accurate and reliable door access operations.

Requires an Ethernet-enabled HAI controller that has firmware version 3.0 or higher.

When used with Access Control Reader (75A00-1), the Electric Door Strike securely locks and unlocks a door without the need of a key. It allows the door to be locked when closed, but can be automatically unlocked by the system, or manually unlocked with a key.

The 12 VDC Electric Door Strike is a Fail-Secure device, which means the door unlocks when power is connected (i.e. the door is locked when power fails).

Each of the following must be purchased separately to make a complete system:

1. CF-2C control unit (includes 12 volt transformer and photocell light-block)

2. CT-6 sensor probe with custom amount of direct burial cable attached (up to 3000 feet) or
a sensing device of your choice that has a N.O., dry, floating relay contact .

3. Sounder(s): Cartell's CT-A1, CT-11 and/or CT-9. May also be used with a compatible sounder
of your own. See page 14 for more information.

This is a stand-alone detection system that announces the arrival of every vehicle in the driveway through audible alerts strategically placed both in and outside the home. A second, 15 watt relay will turn on up to 1800 watts of lights at night. It also triggers CCTV, RF and satellite transmitters, etc.

Additionally, the CF-2C provides a relay output for any sensing device that has a N.O., dry, floating relay contact (passive infrared, microwave, etc.). Add as many and as varied sensors as you like to a single system.

With several adjustments and a sounder that interacts with its features, this is the most versatile detection system available in the market today. With an average 12-15 year field life, it is also the most dependable full-featured system available.

The CT-A1 Sounder is an indoor sounder that installs in a single-gang electric box. Works in
conjunction with both CT-2B and CF-2C control units.

Three Buttons On Plate interact with lights and sensor when used with the CF-2C control unit:
MANUAL ON: Puts lights on timer
RESET: Turns lights off if they have not timed out
EXIT DELAY: Turns sensor probe off so car can pass by and not trip the system (if late p.m. or early a.m.)

(Note: these three buttons are non-functional when used with the CT-2B control unit.)

Securitron's DK26SS is a digital keypad system designed for medium/high security control of electric locks. It consists of two components: the keypad and the CPU board connected by a 16 ft cable. This allows the CPU to be mounted withinthe protected area for higher security . Tampering with or even destroying the keypad will not release the door. The rugged stainless steel keypad may be mounted outdoors in any environment as it is fully weatherproof. The keypad features true 10 digit operation (keys are not paired), three LED's and a beeper.

The UnLatch is a unique automatic door strike. Other door strikes work by releasing a 'gate' that allows the latch (the part that sticks out of the door) to escape from the strike-plate. This requires extensive modifications of the doorjamso that the extended latch can travel through the jam on its outward swing. The UnLatch works of the simple premise of pushing the latch back into the door so the door can be pulled open. The clever thing about the UnLatch is how itworks with latches that have a deadlatch pin (the small half-moon pin that extends with the latch on some locks.) The deadlatch pin makes it difficult to 'jimmy' the door when locked. The UnLatch holds the deadlatch pin in its normal position until activated so that the door remains as secure as ever.