|
|
Order:
888-257-4406
HomeTech Solutions
Cupertino CA
Cable Coax DSL HDMI IR Leviton Plate Quickport Speaker Splitter Switch Video Wall Wire
|
|
(10447) Security System Accessories
Reed Sw. 3/8in Wide Gap White
- Reed Switch With 12" Wire Leads
- Magnet
- Mount Recessed In 3/8" Hole
- .85" Long
- Normally Closed Contacts (Contacts closed when magnet is near)
- Make Gap: 1 1/4" Break Gap: 2"
- Max 30VDC 30VAC .3A
- Manuf: Intellisense
Hide
Loading real-time item data...
CK-MPS9WWG
Reed Switch, Recessed, 1/4 in.
- Reed Switch With 12" Wire Leads
- Magnet
- Mount Recessed In 1/4" Hole
- 1 3/16" Long
- Normally Closed Contacts (Contacts closed when magnet is near)
- Make Gap: 1/2" Break Gap: 1"
- Max 30VDC 30VAC .3A
Hide
Loading real-time item data...
CK-MPS5
Reed Switch, Sub-Mini, White
- Reed Switch With Wire Leads
- Magnet
- Mount with screws (included) or double-stick tape (included)
- Normally Closed Contacts (Contacts closed when magnet is near)
- Make Gap: 3/4" Break Gap: 1 1/4"
- Max 30VDC 30VAC .3A
Hide
Loading real-time item data...
CK-MPS45WWG
Reed Switch, ST, White
- Reed Switch With Screw Terminals
- Terminal Cover For Clean Installation
- Spacer For Uneven Mounting Situations
- Magnet
- Mounting Screws
- Normally Closed Contacts (Contacts closed when magnet is near)
- Make Gap: 1" Break Gap: 1 3/4"
- Max 30VDC 30VAC .3A
Hide
Loading real-time item data...
MPS-20WWG
Rare Earth Magnets
Mighty Mags assist in resolving the installer's problem of drilling into the new thinner, vinyl windows. These rare earth magnets are less than 1/8" high and install fast and easily without worry over damage to the window itself. GRI Mighty Magnets make use of a rare earth alloy which allows the size of the magnet to be significantly reduced while still retaining or improving the gap involved. These rare earth magnets can be mounted with the mounting screws and or double stick tape included in the bag or may be glued into the window.
Hide
- Solves Problem Window Installs
- Time Saving Installations
- GRI's Mighty Magnets are Nickel Plated to Protect from Chipping or Corrosion
Loading real-time item data...
GI-MM600 GI-MM400
Spy PIR Motion Detector, 35 ft
The new SPY Series features the smallest passive infrared detectors of their type presently on the market. Models are designed for in-wall or in-ceiling installation, or behind the wall (or ceiling) mounting. The only visible part of the SPY after installation is the ultra miniaturized lens itself (3/4' dia.)
Four models available. Coverage Diagram. The Long Range Spy 1 provides a narrow angle corridor pattern with a maximum coverage area of 35 ft/17°. The Medium Angle Spy 2 provides 3 double beams in a single detection layer with a maximum coverage area of 25 ft/50°. The WideAngle Spy 3 provides 6 double beams in a single detection layer with a maximum coverage area of 25 ft/100°. The Curtain Spy 4 provides a solid curtain with a maximum coverage pattern of 6 x 12 ft.
Requires 12VDC. Normally closed contacts.
Hide
- Ultra-miniature and Reliable
- Four models for different applications
- Virtually unnoticeable when installed
- Fast, easy installation
- In-ceiling or in-wall installation
- Special anti-false features
- Fast acting; perfect for automation
- Normally closed silent relay output
- Low 12.5 mA current drain at 12 VDC
Loading real-time item data...
VS-SPY1 VS-SPY2 VS-SPY3 VS-SPY4
Recessed Roller Plunger
The Sentrol Roller Plunger contacts save installation time while providing reliable magnetic contact security. The contact switch is activated when the door opens, releasing the tension on the wheel plunger. Drill only one hole to mount the roller plungers; the entire magnetic contact is housed in a economical single unit. Recessed mounting hides the contact within the frame of the door it protects.
Hide
- Benefits of both a plunger and ball contact
- Works on all doors, including steel doors
- Reduces installation time - drill only one hole
Loading real-time item data...
SR-3005 SR-3008
PIR Motion Detect 40x40 12VDC
A simple indoor PIR sensor suitable for use with alarm systems and home automation systems (with a whole-house controller). Requires 12VDC. Normally closed contacts.
Hide
- Flat or Corner Mount
- PIR Motion Sensor
- Look-Down Window
- Adjustable Range
- 90° x up to 40 foot range
Loading real-time item data...
CK-IS215T
Reed Switch, SPDT
Most reed switches are 'normally closed' (the switch is closed when the magnet is near the switch.) Most security systems are wired with normally closed reed switches. Normally open switches are a bit more complicated to make, are a bit more expensive, and are normally not used with security systems.
Normally open reed switches are useful for automation tasks. Connect the 507381BW to a 6330 PowerFlash controller and send a command to turn on a light when the garagedoor is open, or connect the 507381BW to home automation controllers such as ActiveHome or HomeVision.
Hide
- Form C contacts (also known as SPDT).
- Make gap: 5/8"
- Break gap: 1 1/4"
- Max 30VDC 30VAC .25A 3W
- Form C contacts (also known as SPDT).
- Make gap: 5/8"
- Break gap: 1 1/4"
- Max 30VDC 30VAC .25A 3W
Loading real-time item data...
507-AMS-38BW
Glass Break Detector
- Sound activated wired glass-break sensor.
- 30' line of sight range.
- Dual audio technology eliminates false alarms.
- Alarm memory.
- Form C output: Normally open and normally closed outputs.
- This detector is so good at not false-triggering that it is difficult to test! (Unless you have some glass you don't need!) Optional Glass Break Simulator allo
- ws easy testing.
- Low 10 - 14 VDC operation. Low 25mA at 12VDC current draw.
- Adjustment on flex detection to fit characteristics of each location.
- Indicator LEDs.
- Cover tamper switch.
Hide
Loading real-time item data...
FG-701 FG-730
Overhead Door Contact
- Reed switch in tough aluminum housing with 24" armored cable wire leads.
- Magnet and mounting bracket, goes on overhead door.
- Mount reed switch directly to floor with epoxy or screws. OK to drive over.
- Normally Closed Contacts (Contacts closed when magnet is near)
- Make Gap: 2" Break Gap: 3"
- Max 30VDC 30VAC .3A
Hide
Loading real-time item data...
CK-MPS52
Visonic Ceiling PIR
The new DISC PIR from Visonic Ltd. is the smallest 360° ceiling mounted passive infrared detector presently marketed. The DISC provides a nearly conical pattern of maximum 36 ft diameter, when installed on a 12 ft ceiling. False alarms are virtually eliminated with alternate polarity pulse counter signal processing and low-noise pyroelectric detector. Requires 12VDC. Normally closed contacts.
Hide
- Ceiling Mount 360 View
- PIR Motion Sensor
- 24 foot diameter detection circle at 8' height
- 30 foot circle at 10' height
- Adjustable 1 or 2 pulse count detection
- Normally closed contacts
Loading real-time item data...
VS-DISC
Magnetic Contact SPDT 3/4in
The Sentrol 1078 Series Steel Door contacts are designed specifically for use in the steel doors commonly found in commercial building applications. The uniquehousing design features a rugged unibody construction with flexible ribbed sides for quick, secure installation without gluing. The magnet housing isolates themagnet from the surrounding steel for maximum gap distances, both make and break.
Hide
- Wide Gap Series 3/4" (in steel) (w/1921 magnet)
- SPDT (Form C) contacts.
- 12in. leads
- White
- 3/4" diameter for easier drilling in metal
- Self-lock mounting
- Rugged construction
- Attractive, added security of recessed installation
Loading real-time item data...
SR-1076CW
Auto Voice Dialer,2 channel
Perfect for use with the Apex Destiny 6100 security system, this dialer is designed to call a human-being, as opposed to a monitoring company. Connects easily to most security systems (power and trigger connections). Calls up to four voicelines or leaves pages at up to four pager numbers (mix-n-match). For voice-linecalls, plays outgoing message (up to 16 seconds) and allows listen-in and two-way conversations. For pager calls, dials up to 20 digits (28 for position 4), including pauses and '#' tones.
Hide
- Calls Up to 4 People The AD2001 will call any combination of 4 regular telephones, cellular phones, or pagers.
- 2 Separate Alarm Channels Channels can be programmed to call separate phone numbers. Exit/Entry delays and alarm options.
- Advanced Features Automatically redials unanswered or busy numbers. Ability to program the number of times messages will be repeated to each phone number diale
- d. Number of dialing attempts is programmable as well.
- Two Way Voice Verification The 2-way voice verification feature allows the person called to listen in through the highly sensitive microphone or have a speaker
- phone conversation.
- Universal Dial Tone (UDT) The exclusive universal dial tone feature makes the AD2001 suitable for use worldwide. It also adapts to the Voice Message Systems
- of AT&T as well as voice systems of other phone companies.
- Memory The AD2001 has EEPROM memory and will retain programming in the case of a power outage.
- Remote Turn Off Called party may turn off activated channel while leaving other channels armed.
- Line Seizure Built in line seizure. Also plugs into standard telephone jack.
Loading real-time item data...
US-AD2001
Computer Interface - Recordabl
The ELK-129 Computer Sound Card Interface allows a computer's speaker output tobe used as one of the tools for programming the ELK Recordable Modules, such asthe ELK-120, ELK-124, or ELK-MV480. The included shareware software is used to process your computer's audio files for use with the ELK-129. The ELK-129 then 'downloads' the processed files to the Recordable Module. Finished messages can be saved on your computers hard drive for re-use.
Hide
- Powers ELK-120 or ELK-124 Modules during Programming
- Power Switch
- Audio Jacks for Computer and Speakers
- Plug-In Cable for Quick Connections to Recordable Modules
- Includes 6 foot Shielded Cable for Speakers
- Compact Plastic Case
- Programs Recordable Modules in Seconds
- Lifetime Limited Warranty
- Size: 4.4" x 3" x 1.15" (111.8mm x 76.3mm x 29.2mm).
- Supplies 12Volts D.C. @ 1 Amp for ELK-120 / 124 Modules
- Requires Windows 3.1 or higher, 386 processor or better, 4MB RAM, 2MB Hard Drive Space, Floppy Drive, Stereo Speaker Output Jack or Sound Card
- Requires (1) 12V, 20VA AC Transformer (not included) to program the ELK-120 or ELK-124
Loading real-time item data...
ELK-129
Miniature Aluminum Surf.Mount Switch Set
A robust working gap and mounting versatility make the G.R.I. 4460 a top choice where good looks and adaptation to a rough environment are required.
Hide
- Wide Gap Standard 1"+
- Miniature Size 1.5" L x 5/8" W
- Heavy Duty Extruded Aluminum
- Available with 18" Jacketed Or Armored Cable
- Closed Loop, Open Loop, SPDT
- Recommended For Institutional Use
Loading real-time item data...
GRI 4406 GRI 4460A
Alarm Decals
ELK-998 Alarm Decals provide a unique visual deterrent against robberies and break-ins. They feature three bright distinctive colors and are manufactured usingthe finest quality UV-resistant vinyl material and fade-resistant inks.
The self-adhesive backing is weather resistant and can be mounted to virtually any smooth wood, metal, or glass surface. To further enhance the life expectancy of our decals, they are laminated with an additional clear vinyl protective materialafter printing. For maximum effectiveness, apply one decal to every accessible door and/or window opening.
Hide
- Self Adhesive Peel And Stick Backing
- Fade-Resistant Ink
- Secondary Protective Clear Vinyl Laminate
- UV-Resistant Vinyl Material
- Three Colors: Red, Blue, White
- Size: 3.2" x 6.4" Triangle Shape
Loading real-time item data...
ELK-998-05
Conical Strobe Lights
The SL-5A series strobes are a high performance, high intensity, solid state strobe, designed for applications where 360° visual annunciation is required. The strobe is polarized for connecting to supervised circuits and is designed with a xenon flash tube. The SL-5A is a high profile strobe with a low current draw of 250mA at 24V DC. The strobe can be used as a stand alone or in combination with other signaling devices to provide a visual verification signal. The SL-5A series strobes are recommended for use in areas such as; parking facilities, schools, corridors, apartments, office buildings, restaurants, hotels, and any other application where effective visual warning is required. Installation must comply in accordance with applicable standards and/or all state and local electrical codes and authority having jurisdiction.
Hide
- Polarized using filtered DC or unfiltered FWR input voltage
- 12/24V DC selectable voltage
- Over 200 hours of operating life
- Solid state circuitry and a xenon flash tube
- Impact resistant black abs base
- Interchangeable polycarbonate lens
Loading real-time item data...
SL-5AA SL-5AB SL-5AC SL-5AR
|