The ELK-44 is a universal 30 Watt - 8 Ohm Speaker which may be connected to anysiren driver or amplifier. It features a heavy duty voice coil and magnet, allowing it to withstand up to 50 Watts of peak power. The ELK-44's removable 'U' shaped mounting bracket makes installation quick and simple. It's small and compact size allows it to be placed in vents, attic eaves and soffits, and other unique locations where large and bulky units will not fit.

The ELK-120 v.2 features 4 channels that can be configured as 2 channels of siren and 2 channels of voice, or all 4 channels can be used for voice. Either way the voice channels are fully recordable and are stored in non-volatile re-programmable memory. Total time of recording is 8 minutes. The Siren channels offer a choice of: Classic Yelp Sound, Temporal Coded Horn, or Pulsing Industrial Horn.

The ELK-800 is a great compact audio amplifier It may be connected to virtuallyany audio source, i.e. microphone, radio, computer sound card, telephone systempaging output, etc., even an ordinary single line phone set. The audio source is amplified up to 10 watts, adjustable from an on-board volume control. Remotelyinstalled, it saves money by requiring only 22 - 24 gauge telco or alarm type wire. It operates on 12 -24 volts AC or DC and has built in volume adjust. It canalso drive multiple speakers.

The ELK-110 Voice 'Talking' Driver features high quality digitally pre-recordedvoice messages and loud attention getting siren sounds in an economical, low current draw, compact package. It features two input channels, bilingual voices (English and Spanish), and many unique options which allow it to be used with virtually any residential or commercial alarm installation. The voice messages and the siren alternately sound whenever one of the channels are activated.

The ELK-110 may be customized by use of on-board jumpers. For example: our MilliMiser™option allows the already low current draw of the ELK-110 to be reduced even lower. This is ideal for controls with limited alarm output power. The ComboTrigger™ option allows controls which have a single alarm output and pulsing option toactivate both the burglar and fire alarm sounds. The VolumeStep™ option is bestdescribed as the 'peacekeeper', since it causes the siren sound to start at lowvolume, gradually increasing over 90 seconds to maximum volume.

The ELK-150RT is a self-contained Siren in a tampered 'No Rust' stainless steel enclosure. It features two sealed reed tamper switches, one on the Back plate and one on the Front Cover. The switches are normally closed and pre-wired in series. The ELK-150RT can produce two distinct sounds from a single input trigger. The stainless steel exterior reflects the color of the mounting surface allowing the ELK-150RT to blend easily with any residential or commercial building.

The ComboTrigger feature allows controls which have a single alarm output and pulsing option toactivate both the burglar and fire alarm sounds. The MilliMiser feature allowsthe already low current draw of the ELK-150RT to be reduced even lower. This is ideal for controls with limited alarm output power.

The ELK-45 is a loud self-contained electronic siren in a compact and attractive housing. This siren draws less current than many competitive units and features the ability to produce two distinct sounds from a single input trigger. The ComboTrigger feature allows controls which have a single alarm output and pulsingoption to activate both the burglar and fire alarm sounds.

The MilliMiser feature allows the already low current draw of the ELK-45 to be reduced even lower. This is ideal for controls with limited alarm output power. The ELK-45's removable 'U' shaped mounting bracket makes installation quick and simple. It's small and compact size allows it to be placed in vents, attic eaves and soffits, andother unique locations where large and bulky units will not fit.

The ELK-74 is a Two-Tone (Yelp & Steady) Siren mounted in an attractive surface mount plastic enclosure. This versatile Echo™ Series siren is designed to be heard but not seen!.Sound 'echoes' off mounting surface from back plate edge.

This unique contemporary siren has a smooth, paintable, 'no grill' surface that easily blends withany decor. This siren mounts to any flat surface or single gang electrical 'J' box.

The ELK-WK1 is a an optional wall mount kit for use with the ELK-SL1 Strobe Light. The kit features a decorative snap-on trim cover with all hardware for mounting the strobe to any flat surface or directly to a single or double gang electrical box.

The GE3 Series offers field selectable candela options of 15, 30, 60, 75, and 110 (24VDC only) candela. Available in 12 or 24 volt.

The Commander3 Series is a low profile Strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available.

The ELK-SL1 is a weatherproof strobe light designed for easy attachment to ELK's stainless steel speaker and siren units. An optional wall kit (ELK-WK1) allows the strobe to be mounted to a wall or to single or double gang electrical boxes.

The attractive SL1 features simple 12 Volts DC two-wire hookup, low current draw, and compatibility with virtually all 12 volt control panels (including pulsing alarm outputs). The ELK-SL1 is molded from virtually indestructible polycarbonate, such as Lexan, and is available in clear, amber, blue, and red.

ELK-SP12F is a flush mount, interior speaker. It is ideal for alarm
or voice applications and flush mounts for a clean, designer look.
Installers will applaud the easy installation, utilizing standard, single
gang electrical boxes.

The Outdoor Commander Series is a low profile strobe, horn or horn/strobe combination that offers dependable visible and/or audible alarms. The WGE Series horns offer a new synchable chime and whoop tone and provides a selection of high or low frequency broad band 1500-3000Hz mechanical sounding (evacuation) tone.