This tool holds the voice/data jack while you terminate the wires into the jack. It holds all types of Leviton jacks (5G110, 61110, 5G108, 40734, and 40735). Unit can be mounted to 19" Rack Rails for ease of use or hand-held. Tab holds slack on cable while terminating. Cushioned grip.

Short fingernails? Fat fingers?

You'll need a spudger!

Durable plastic, multipurpose yellow probe pic. One end contains a wire hook to remove wire or bridging clips from quick-connect blocks. The opposite end tapers to a flat end with a notch to trace wires or separate one wire from a group.

A must for working on "live" punchdown blocks without shorting everything out!

This is an offshore "knockoff" of the Harris D814 tool and blades. The blades are even interchangeable with the D814 tool. Now...you get what you pay for, but if you only have an occasional need for a punchdown tool, this one will work fine for you and save you some money over the Harris tool. Exactly the same features as the D814 tool below.

It is available with and without blades.

Plastic manual disposable punchdown tool. Approximate tool life: 25 presses (3 Jacks).

Mini Punchdown tool with a 110 Style blade.

These special application blades are for use with the D814 impact tool (above) for terminating 22, 24, or 26 gauge wire. Made of durable stainless steel.

The new, patented, 110 EZ-Data Blade® provides a new level of performance when punching down 110 style cross connect blocks and keystone jacks. It features a precision ground, replaceable cutting knife manufactured from medical grade stainless steel.

The sharper cutting profile of this knife provides the technician with a far better wire cut than the traditional 'chisel' style cut of other blades. Start every job with a new cutting knife for faster and better terminations. Knives are easily replaceable with a standard phillips screwdriver.

Applications: 110 Style cross connect blocks, 110 Style keystone jacks.

JackRapid is the new, patented punchdown tool from Harris. Designed to seat and cut all eight wires at once, it saves time, increases accuracy, and reduces waste. Simple one-handed operation reduces hand fatigue and results in virtually error-free terminations, so your installation goes up to eight times faster! The unique design also accommodates close-to-wall installations - no slack, no problem.

Works with Leviton Quickport voice grade, cat 5, and cat 5e connectors.

This high quality, economical tool is designed for terminating and trimming thewire in a 110 style cross connect block or wall jack.

The D914 Automatic Impact Tool the only combination impact and torgue tool designed to meed your wire termination requirements. The handle of the D914 is specially designed to accomodate your existing D814 blades and the new screwdriver and adapter blades. There's no need to carry a different tool for each block or function. The D914 meets all industry requirements for wiring 110, Krone, BIX, and 66 blocks. (Blades sold separately.)

The D814 tool handle can be fitted with several interchangeable custom blades (sold separately, below) in a variety to cover many termination types: including 110 IDC and 66-clip. A spare blade can be kept in a storage chamber in the handle.

This is an installers tool! It saves time and money by allowing the installer to punch down up to 8 wires in one shot. A must have for anyone who punches down 110 blocks on a regular basis.