The 1x8 and 3x8 Bi-directional RF Splitters provide better signal quality on all the home's TVs and save space in the enclosure. Plug the incoming signals fromthe CATV, satellite (after set-top box), or antenna into the input. Auxiliary ports 2 and 3 on the SAM-RFBA38 can also be used for other modulated signals fromDVD/VCRs or security cameras. Then plug the power adapter in and you're ready to start enjoying better video quality throughout the home.

Channel Vision's new 15dB power injected inline amplifier provides the lowest induced noise figure available and is designed with the future in mind. Unlike other RF amplifiers, the CVT-15PIA features a bi-directional return path for use with future interactive TV, addressable cable box converters, and ultra high-speed cable modems.

Optional power injector is only needed if you do not have AC power near where the amplifier will be installed.

The C-0330 is an 8-output amplified splitter with a built-in combiner for modulated signals. It allows IR signals to pass through the modulator input to the TV outputs, making it a perfect match for the E2200IR, E3200IR or E4200IR.

This device combines an amplifier, splitter, combiner, and an IR engine in one package. The High Headroom amplifier handles varying signal strengths better, such as a strong modulated channel and weak antenna channel. This is particularly important when trying to receive weak UHF HDTV signals.

The is an 8-output amplified splitter with a built-in combiner for
modulated signals. It allows IR signals to pass through the modulator input
to the TV outputs, making it a perfect match for the E2200IR, E3200IR or
E4200IR.

Enjoy better video quality by boosting incoming signal with an amplifier. Generally an amp is recommended if splitting the signal six or more ways. Attach the incoming signal into the amplifier, connect the power, and plug the output of the amplifier into the input of the splitter to distribute boosted signal throughout the home. The bi-directional amplifier allows customer signal to be returned back to the CATV provider.

The CVT-40BID is a high gain RF amplifier that covers all TV bands and provides an amplified 5-42MHz reverse channel for CATV upstream information. The CVT-40BID includes a variable input attenuator to reduce the possibility of over driving. The CVT-40BID also includes variable tilt compensation to allow large systems to be properly balanced.

The CVT-40BID is suitable for use with CATV or antenna systems.

The HCDA-1FRA-AG is the newest addition to our a high performance HCDA Series amplifiers, with the addition of adjustable gain for both the forward path as well as the return path to give you full control and flexibility with your system. The product case, and all of the ports are hermetically sealed to ensure no moisture comes in direct contact with the electronics. If you do not have power available in the location you are installing your system, you can use an HCDA-PI Power Inserter to remotely power the amplifier.

One input, one output, 1 GHz bi directional - 15+db/8 db forward gain drop amp, powered through coax.

For use with CVT15PIA RF amplifier.

Optional IR control of connected video sources and whole house IR intergration with a 12 volt bi-directional IR engine. By adding a 2100A wall plates and a 12 volt target to the coax run of any room and allows IR signals to be routed to either a 2010 wall plate, 5500 series or SVM series modulator or intergrated into an exsisting IR system.

Channel Vision's RF distribution panels take the guess work out of system installations! Standard panels are available in 3-input, 12 outputs with cable runs up to 300'. Your installs will have a professional appearance in flush-mount or surface-mount styles with the savings and convenience of a pre-wired and balanceddistribution system.