|
|
Order:
888-257-4406
HomeTech Solutions
Cupertino CA
Cable Coax DSL HDMI IR Leviton Plate Quickport Speaker Splitter Switch Video Wall Wire
|
|
(10297) Antenna Mounting Hardware
5 Foot Mast, 18AWG Galvanized
- 5 Foot Length.
- 18 Gauge.
- Use two masts for 10 foot length.
- Keyed ends allow extending without twisting.
- Galvanized steel with grey powercoat.
Hide
Loading real-time item data...
102639
Tripod, 3 foot, 2 1/4 in. mast
- Accepts up to 2 1/4 in. masts.
- All Heavy 5/16" Bolted Construction
- Easy to tilt and service
- Can be removed without leaving holes in roof
- Lessens chance of roof leaks
- Sturdier - Safer
- Replacement feet kits & tar pad kits available
- Holds mast securely in two positions.
- All zinc coated, galvanized steel, or stainless steel hardware.
- Preassembled.
- Does not include mast.
- 3 feet high (TRIPOD3A)
- 5 feet high (TRIPOD5A)
Hide
Loading real-time item data...
809 911 909
Wall Mount W/Supp, 12 in, pair
- Accepts up to 1 1/2 in. masts.
- Holds mast 12" or 18" away from wall.
- Support bar holds weight of mast.
- All zinc coated or galvanized steel hardware.
- Includes carriage bolts and lag screws.
- Sold in pairs.
Hide
Loading real-time item data...
112 118
Chimney Mount for Mast
- Accepts up to 1 1/2 in. masts.
- Holds mast securely in two positions.
- All zinc coated, galvanized steel, or stainless steel hardware.
- Includes all hardware except mast.
- New version with simplified installation and instructions!
- Positive anti-turn feature.
Hide
Loading real-time item data...
1218
Non-Penetrating Roof Mount Base
Base frame for 46 and 60 cm antennas with Winegard, RCA, Sony, ITI and other mounting feet. Single base frame covers approximately six square feet. 25.5" x 37.5" square.
Hide
- Holds up to 6 concrete blocks.
- Use with DS5146 or DS5001.
- Galvanized. Grey powercoated.
- DS5146
- Use with a 5' mast and a small antenna such as the TV50 and TV50MAST adapter. Or mount a DSS dish directly to the mount pipe.
- Use with one DS5046 frame and 6 concrete blocks or sandbags.
- Holds up to a 76cm antenna.
- 1 1/2" ID pipe. 19" Tall.
- DS5001
- For large antennas and/or tall (up to 10') masts.
- Use with two DS5046 frames and 12 concrete blocks or sandbags.
- Holds up to a 1 meter antenna.
- 2 1/8" ID pipe. 2 3/8" OD. 30" Tall.
GC-DS5146
Roof Mount Post Kit, 1.66 in O.D.
GC-DS5001
Roof Mount Post Kit, 2.38 in O.D.
Loading real-time item data...
DS-5046
Rubber Mat, 36 x 42
- Helps to protect roof surface when using non-penatrating roof mount.
Hide
Loading real-time item data...
102758
Non-Penetrating Roof Mount
- 34 3/4" square base
- 60" Mast, 1.25" O.D. included
- Ships dissasembled
- Does not fit the A49S 5 LNB Antenna
Hide
Loading real-time item data...
103489
Tripod, 3 foot
- Accepts up to 1 3/4 in. masts.
- 1 1/4" diameter legs.
- Holds mast securely in two positions.
- All zinc coated, galvanized steel, or stainless steel hardware.
- Preassembled.
- Does not include mast.
- 3 feet high (TRIPOD3)
- 5 feet high (TRIPOD5)
Hide
Loading real-time item data...
TRT36 811
Roof Mount Post Kit, 1.66 in O.D.
Post kit will support antennas up to 76 cm when used with the single base frame, DS-5046 or DS-5047.; includes pole and braces. Pole size 1.66" OD, 19" long, 16 ga steel. Base frame not included.
Hide
- Use with a 5' mast and a small antenna. Or mount a DSS dish directly to the mount pipe.
- Use with one DS5046 frame and 6 concrete blocks or sandbags.
- Holds up to a 76cm antenna.
- 1 1/2" ID pipe. 19" Tall.
GC-DS5046
Non-Penetrating Roof Mount Base
Loading real-time item data...
DS-5146
2in OD x 18 Ga 6ft Tubing
- 6 Foot Length.
- 18 Gauge.
- Galvanized steel.
- This 2" mast is the right size for mounting the new AT9 DirecTV dish!
- Note that you must use other mounting hardware (tripod, chimney mount, wall mount, etc.) that is compatible with a 2" mast.
- These masts do not fit together.
Hide
Loading real-time item data...
100495
Roof Mount Post Kit, 2.38 in O.D.
Post kit designed to support 1 meter antennas when used with two (2) base frames, DS-5046 or DS-5047. Covers approximately 12 square feet of roof space; includes pole and braces. Pole size 2.38" OD, 12 ga steel, 30" long. Base frames not included.
Hide
- For large antennas and/or tall (up to 10') masts.
- Use with two DS5046 frames and 12 concrete blocks or sandbags.
- Holds up to a 1 meter antenna.
GC-DS5046
Non-Penetrating Roof Mount Base
Loading real-time item data...
DS-5001
Wall Mount, 4 inch., Pair
- Accepts up to 1 1/4. masts.
- Holds mast 2 1/2" away from wall.
- Furthest protrusion with 1 1/4" mast approx 5".
- All zinc coated or galvanized steel hardware.
- Includes hardware.
- Sold in pairs.
Hide
Loading real-time item data...
104W
|
HomeTech Solutions is UpFront