Channel Vision's full line of hybrid splitters pass signals a full 1GHz bandwidth, are PCB based circuitry inside for maximum port separation with reliability strong die cast housing, and DC passing through all ports so an installation canpass IR and voltage down the coax.

6db, 9db,12db, 16dB, 20dB, or 24dB Line Tap
1dB loss
dc passing

The advanced design of these vertical 3GHz splitters allows for exceptionally high isolation and the lowest amount of insertion loss. The performance ranges from 5MHz to 3000MHz and offers the highest port-to-port isolation allowing power passing one port.

Generic MATV splitters provide excellent performance at low costs. Applications range from residential to MDU installations in international and domestic cable distribution systems. Advanced printed board circuitry includes special ferrite core material guaranteeing minimal insertion loss, optimal isolation and return loss to 900 MHz ensuring high-quality signal transfer. DSU series F-port threads are precision machined, ensuring easy connector installation and removal, and improved port-to-connector interface. The zinc-alloy cast case and epoxy sealed back plate provide superior RFI shielding (-70dB) and a full environmental seal. Each DSU splitter is individually tested at the factory to comply with precise quality standards.

1x3 RF splitter, F-connector, 1GHz, SCTE compliant

The advanced design of these Horizontal 3GHz splitters allows for exceptionally high isolation and the lowest amount of insertion loss. The performance ranges from 5MHz to 3000MHz and offers the highest port-to-port isolation allowing power passing one port.

Unique ultra-compact in-line splitter.

Gale Corporation's patented high performance inline splitter is designed to be used where space and cable length is limited. It is quite simply a tiny 1GHz splitter with no compromises in performance!

The world's first 2,3, and 4-way splitters designed to be installed into a wall plate.

Gale Corporation's patented high performance wall plate splitter is designed to fit conveniently in a single wall box with one input and two, three, or four outputs. Note the single output port on the back of the splitter that attaches to a wall plate.

Wallplate and nut not included. (See Related Products.)

Ultra compact cable modem / TV splitter designed to install into a wall plate.

Gale Corporation now offers a unique solution with this patented TV & Modem Splitter that utilizes dual-port wall plate to deliver signal to both a TV and cable modem with minimal signal interference. The top port is dedicated to the modem and the lower port feeds the digital TV. This dualport configuration ensures clean and organized cable management at last!

Very high-quality wideband taps specifically designed for 'stacked' combinationsatellite and off-air distribution systems.

Innovation™ Angle Port Splitters

Innovative splitters with the world's first angle port design!

Undoubtedly, this truly innovative, patented Angle Port Splitter designed by Gale Corporation is every technician's dream! This super-slim body can be installed in almost any termination closure allowing incredibly easy access to each port whether attaching or disconnecting a cable. The Angle Port Splitter has the most accessible ports of any splitter available

Gale Corporation's patented, ultracompact Directional Couplers (DC) make "loop-through' cable design a breeze! Smart, ergonomically designed DC devices attach directly onto a standard wall plate making the most of limited space. Additionally, the Gale Corporation DC nearly eliminates the potential for crushed cables and stressed connectors - and return service calls.

Note: These taps can be used in a wallplate; The input and the "through" output will be on the rear, the "tapped" output will stick through the wallplate into the room. Combine various values of taps with a final two-way wallplate splitter (GA-WP2) for a complete "daisy-chained" video distribution system.

Channel Vision's RF distribution panels take the guess work out of system installations! Standard panels are available in 3-input, 12 outputs with cable runs up to 300'. Your installs will have a professional appearance in flush-mount or surface-mount styles with the savings and convenience of a pre-wired and balanceddistribution system.