The equipment shelf allows you to place your own equipment into the FutureSmartPanel. Space is provided for equipment up to 10' wide, 3' high, and 7' deep.

The service input hyb is the gateway for connecting outside telecommunications and network services. This hub has a standard configuration of two coax source inputs (TV, VCR, CATV, SATVS, etc.), four CAT5 twisted pair inputs (phone, fax, or ISDN lines, etc.) and two fiber optic inputs (communication, entertainment, satellite, Internet, etc.). Also, it includes four expansion slots for adding extra inputs and is re-configurable.

This FutureSmart Networks exclusive 11 location, four line RJ45 harmonica-style twisted pair hub is used to collect and distribute voice and data. The 12/4 Telephone Hub has twelve RJ45 ports, supports four incoming telephone lines and includes two Amphenol or Telco connectors on the back, which allow easy interface with a telephone Key System Unit (KSU). The Amphenol or Telco connectors are equipped with a shorting block that will convert them for use with Plain Old Telephone (POTS) lines. The 12/4 also includes surge suppression and an RJ31X port for interface with a security system.

This 12 port twisted pair hub is used for connecting and distributing voice and data. The hub has an Amphenol or Telco connector on the back that allows easy interface with a telephone Key Service Unit (KSU). The Amphenol or Telco connector is equipped with a shorting block that will convert it for use with Plain Old Telephones (POTS) lines. The hub may also be used to distribute infra-red signals.

This Hub provides distribution of one dual LNB DBS digital satellite dish signal to 4 to 8 locations. The DBS Distribution Hub will provide DBS signals to eachroom through a single coax line and will not require modulation. Each TV in usemay connect to a separate DBS receiver if desired. Available in 4 and 8 port configurations.

The Ethernet switch is used to create a Local Area Network (LAN) by connecting multiple computers, printers, scanner, fax machines, etc. 8-Port

The Triple Channel Modulator Hub is used for creating in-home television channels that can be viewed from any TV in the house. Signals from three different audio/video sources such as TVs, VCRs, DBS or satellite TV, laser disc players and security cameras can be identified and displayed by any TV.

Our rule-of-thumbis that modulators for cameras (like a front-door-cam) should go in the panel like this one. You run baseband video (and audio, if desired) back from the camera to the modulator. You can also use any modulator of your choice and an equipment shelf (HBES-W).

For non-camera sources, such as the DVD player, we suggestthat you place the modulator out next to the video source.

This 8 port twisted pair hub is used for connecting and distributing voice and data. This hub works well with the Panasonic Key Service Unites that require a three pair connection rather than two (such as the fully digital KSUs). Note: A shorting block is not provided and this hub cannot be used with Plain Old Telephones.