These Channel Plus and Open House enclosures provide mounting, protection, and wiring access for various modules.

See more Open House products.

The H236A is a 36 inch tall recessed enclosure with an optional cover. It is 14inches wide to fit between 16 inch studs. It offers 69 grid-inches of space andhas knock-outs located on the top and bottom. This enclosure may be surface mounted or recessed.

Have a small, simple, installation? Install up to three modules (depending on module size) in this versatile and inexpensive bracket. Add the optional CP-H205 cover for a clean appearance.

H318 is an 18 inch tall recessed enclosure with an optional cover. It is 14 inches wide to fit between 16 inch studs. It offers 33 grid-inches of space and hasknock-outs located on the top and bottom. This enclosure may be surface mounted or recessed.

The Model H312KIT 12" Plastic Enclosure, Includes Cover provides grid mounting space for Linear structured wiring components. The enclosure is ETL Listed and features 19 grid inches of mounting capacity in two 9-1/2" columns. Structured wiring modules snap securely into the enclosure's mounting grid. Recommended enclosure for the M&S Systems DMC-10H Structured Wire Intercom Hub.

The enclosure mounts in the wall between standard 16-inch spaced studs, or it can be surface mounted. The flexi-mount system features four flexible mounting tabs on the sides of the enclosure. The flexi-mount tabs compensate for varying stud spacing and allow for adjusting the depth of the cabinet for flush-mounting with all thicknesses of drywall.

A snap-on cover that can be screwed shut is supplied with the enclosure. The vented cover has a raised interior, allowing for easy wiring and better component cooling.

Eight combination conduit knockouts (four along the top, two on the bottom, and one on each side) that fit either 2" or 1/2" conduit fittings are provided. The enclosure has an additional knockout on the bottom to mount a single-gang junction box for AC outlet installation.

The new 2619 rack mount grid system allows for structured wire systems to be used in 19' EIA racks for fast expandable installations. The 2619 is 12 spaces high and 5 inches deep. It is stackable with an open top and bottom for continuous wire management. The 2619 can also be surface mounted to a wall or plywood sheet. Mounting tabs allow for on stud center mounting and raise the panel 1/2' for wire pass through.

Need more cabinet space? Mount two CP-H236 cabinets in a stack and connect withtwo CP-H271 couplers!