These modules go in the Channel Plus or Open House enclosures to provide telephone line and computer network distribution.

See more Open House products.

Punch down your Cat 5 cables from your jacks to the 110 connectors on this module...then to enable a jack, just patch from this module to your switch or router!

A different way of connecting phones... Connect your inside phone jacks to the punchdown terminals on a CP-H628 module. Then 'patch' the phones you want active to any output jack on the CP-H619 module. This patching method makes it easier to enable and disable different jacks, and even to easily convert a jack from phone to data!

Simple, quick, and inexpensive. Connect up to 4 outside lines to up to 6 locations inside with the H616. Uses fast and easy 110 terminations. (You will need a 110 punchdown tool and 110 blade.)

Have more than 6 locations? Add one or more expansion hubs!

This versatile module lets you connect a Cat 5 cable to the bottom row, then either bridge it with all the phone lines, or patch it to a phone system. See installation manual for details. Perfect for installations where you might be addinga phone system at a later time.

The DMT-24 Telephone Distribution Module is part of the new line of ChannelPlusstructured wire products. It will accept 4 incoming telephone lines and distribute them to 24 location with RJ-45 outputs. It is made of brushed aluminum and can be easily mounted into the ChannelPlus rack-mounted grid system (model 2619) or Open House cabinet.Each unit comes with integrated surge suppression, a master disconnect, and a RJ-31X connection for alarm systems. Additional features include individual line LED indicators for surge events and an easy labeling systemfor integrated wire management and location identification.

Protect your phones, fax machines, and computers by conditioning all incomming telephone lines! Just run the lines through this module before connecting to your first telephone module.

The ChannelPlus DMD-16 Data Termination Hub provides a superior way to terminate data connections. Each unit has 16 unabridged 110 punch down termination points that are aligned with a corresponding RJ-45 connector. Rated for Cat-5e performance in data networks, the DMD-16 is an excellent data termination hub for use with an Ethernet hub for LAN networks.

The DMD-16 can also be used as a termination point for control signals over Cat 5, video and audio signals, home control signals, security camera video and KSU and PBX phone systems.

The DMT-16 Telephone Distribution Module is the first in a series of distribution modules available in the ChannelPlus structured wire line of products. The DTM-16 will accept 4 incoming telephone lines and distribute them to 16 locations with 110 punch down connectors. It is made of brushed aluminum and can be easilymounted into the ChannelPlus rack-mounted grid system (model 2619) or and Open House cabinet. Each unit comes with integrated surge suppression, a master disconnect, and a RJ-31X connection for alarm systems. Additional features include individual line LED indicators for surge events and an easy labeling system for integrated wire management and location identification.