The SOHO Access™ mini patch panel supports up to 8 outlets and is designed withfront punch down terminations. It allows for changes in wiring to be made quickly and easily with no tools. Signal is simply patched from the source to the desired outlet.

The combination voice/data distribution module provides 110 IDC punchdown inputs for both phone and data service with RJ45 outputs. RJ45 outputs allow for easymoves, adds and changes by the installer or homeowner.

The DSL filter module allows homeowners to split the phone and data signal withone centrally based filter rather than unsightly DSL filters at every phone outlet location. Filtering isolates telephone equipment impedance that interfere with ADSL communications.
With the SAM-DSL, the phones are wired as normal however, the 'TEST' and 'OUT' are patched to run filtered signal to the outlets andunfiltered signal to the 'DSL/MODEM' jack. Then simply connect the DSL/MODEM jack or IDC to the modem. If DSL service is using a line other than line 1, the SAM-DSL provides an alternative method of wiring.

The Voice/Video Combination Module is made up of both a V10 Voice
Distribution Module that is configured for up to 10 outlets each with up to
4 lines of basic telephone and a RF Splitter to distribute video throughout
the home. The module’s voice board also includes an RJ31X interface for
a security/alarm system and one expansion/test jack to either bridge
service to a SAM-VX10 Voice Expansion Module or to test the service
provider and internal lines. The video splitters provide high quality and
reliable video distribution with industry approved, digital ready splitters
that meet ANSI/SCTE standards. The combo module’s bracket maximizes
enclosure space, minimizes cable strain, and facilitates better wire
management and ease of installation.

The enhanced voice distribution module is configured for up to 22 outputs for star wiring with 10 outputs passing all 4 lines and 12 outs passing 2 lines in varying combinations. The module also includes an RJ31X interface for a security/alarm system and two test jacks to test the service provider line and internal lines. This module allows for simple moves, adds, and changes without requiring re-termination.

The 10-port Voice Expansion Module bridges 4 lines from SAM-V8, SAM-VE, or SAM-DP9 to an additional 10 outputs (110 IDC blocks). The SAM-VX10 is expandable to additional SAM-VX10s if needed. This expansion module is bridged from the SAM-V8, SAM-VE, and the SAM-DP9 modules using two RJ45 patch cords (included).

The combination voice/data distribution module provides 110 IDC punchdown inputs for both phone and data service with RJ45 outputs. RJ45 outputs allow for easymoves, adds and changes by the installer or homeowner.

The switch jack from Suttle allows two providers' service to be controlled at the first jack in series through a simple, customer-operable switch. This jack eliminates the need for service truck rolls and jack re-wiring when the service is changed by the home owner. Intended for daisy chained retrofit applications.

4-line input (110 IDC), 8 output (RJ45), RJ31X alarm jack, 2 test jacks

The Voice/Video Combination Module is made up of both a V10 Voice
Distribution Module that is configured for up to 10 outlets each with up to
4 lines of basic telephone and a RF Splitter to distribute video throughout
the home. The module’s voice board also includes an RJ31X interface for
a security/alarm system and one expansion/test jack to either bridge
service to a SAM-VX10 Voice Expansion Module or to test the service
provider and internal lines. The video splitters provide high quality and
reliable video distribution with industry approved, digital ready splitters
that meet ANSI/SCTE standards. The combo module’s bracket maximizes
enclosure space, minimizes cable strain, and facilitates better wire
management and ease of installation.