Suttle Smooth Finish Jack Plate
Description
This jack is designed for a competitive service provider to distribute voice service via a residential gateway (i.e., EMTA, or
phone adapter) through a home's existing wiring. The jack must be terminated at the demarcation point where the
incoming wire enters the customer's premise (first jack in series). The incumbent service provider's incoming wires are
terminated to the blunt cut leads using the butt splice connectors. Premise wires to the screws on the back of the terminal
block. All jacks connected in series from this jack will be controlled through this switched jack.
phone adapter) through a home's existing wiring. The jack must be terminated at the demarcation point where the
incoming wire enters the customer's premise (first jack in series). The incumbent service provider's incoming wires are
terminated to the blunt cut leads using the butt splice connectors. Premise wires to the screws on the back of the terminal
block. All jacks connected in series from this jack will be controlled through this switched jack.
Features
- Control Access from the front of the jack with switches for both line 1 & line 2
- Wire it once - no rewiring required if service turned back to incumbent
- Switch can be performed by customer
- Switch is inset 0.05" below face plate to avoid accidental switching
- Plastic wall and PCB provide added protection from damage to wires and switches during installation
- Available in single and dual port options.
- Customizable for your name/logo - Reinforce your brand at the visible point of service
- Smooth, sleek design matches electrical face plates.
- Available in single and dual jack options
Specifications
| Contacts | 50 microinch hard gold plating minimum |
| Terminals | Binding Screws |
| Contact Pressure | 100 grams minimum |
| Contact Resistance | 5 milliohms maximum |
| Insulation Resistance | 500 megaohms minimum |
| Current/Voltage | 125 VDC @ 2 amps |
Photos
