Xantech IR Receivers
172-94
Xtra Link 2
(Coax Based System) |
|
|---|
|
The Xtra Link 2 is the only pre-packaged, single part number
solution Xantech offers. Designed to solve a specific problem, the
set includes everything you need to control a remote VCR, cable box,
etc. over an existing coaxial cable.
|
- Attractive case for shelf top locations.
- Talk back red LED tests system for correct wiring
as well as indicating infrared reception.
- IR freq. bandwidth: 30-100 kHz.
- Reception range: > 30 ft
- Reception angle: 45°
- Max current output: 100 mA.
- Max directly driven IR emitters:
Up to two single or two dual emitters.
- CPL77 Coupler contains a 5-900 MHz
2-way RF splitter.
- Cable: RG-59/RG-6 coaxial.
- Max cable length: One mile (RG-59).
- Power: 12 VDC @ 10 mA.
- Power Supply Included.
- Dimensions of 291-95: 3-1/4" x 1" x 2".
|
The Xtra Link 2 utilizes the 291-95 IR Receiver which has greatly improved
range and interference rejection. The 291-95 receives the IR signals from
a hand held remote, converts them to DC control signals and passes them
to the RF/IR Injector where they are mixed with the RF television
signal. This combined signal is carried over a coaxial cable. At the
other end of this coax the signals are separated at the RF/IR Coupler
and the DC control signal is sent to an infrared emitter placed directly
on the IR control window of the component you want to control.
NOTE: 17294X kits are used along with one standard 17294 when
installing Xtra Links in more than one room. This avoids duplication of
couplers, emitters, and coax jumper cables.
| |
| |
|
