Infrared Distribution Accessories

IR Distribution Accessories
RF/IR Injector
RF/IR Coupler
RF/IR Coupler
Bypass Kit
Emitter Extension Cable
Outdoor Device Cover
Programmer

• Used to inject the infrared control signals when used in conjunction with a TV coaxial RF cable.
• Has two "F" type coaxial jacks, one IR receiver 3.5mm mini stereo jack and one 2.1mm power jack.
• IR RCVR jack works with any Xantech IR Receiver having a 3.5mm stereo mini plug.
• Requires 781RG power supply.

• Used to extract the IR control signals when used in conjunction with a TV coaxial RF cable.
• Has two "F" type coaxial jacks for RF connections.
• Two 3.5mm mono mini EMITTER jacks with 470-Ohm resistors drives two single or two dual emitters.

• Used to extract or inject the IR control signals when used in conjunction with a TV coaxial RF cable.
• Has two "F" type coaxial jacks and one IR out (or in) 3.5mm mono mini jack.

• Routes the IR control signals around RF amplifiers and non-DC-pass RF splitters.
• Kit contains two CPL10s, one jumper cable with a 3.5mm mini mono plug on each end and two short RG-59 cables with "F" connectors on each end.

• 50-foot, 24-gauge, 2-conductor cable. Use for long emitter runs.
• 3.5mm mini stereo plug on one end and female mini stereo jack on the other.

• 2-Gang weather resistant front cover protects the 730 and other Decora styled devices.
• Hinged self latching cover and front plate have neoprene gaskets to seal out moisture.
• Stainless steel mounting screws included.

• An expanded version of the RC68 programmer with over 14,000 IR codes
• It contains all the IR codes necessary to operate all the Xantech IR controlled components
• Use to program universal learning devices, such as Xantech remotes and keypads
• IR control code groups are adjustable within many Xantech components
• Requires two AA batteries (not included)
• Dimensions: 7 1/8” H x 2 5/8” w x 7/8”D (181mm x 67mm x 23mm)