Thermostats

Robert Shaw Thermostats
Digital Designer Two-Setting Thermostat
Digital Designer Programmable Thermostat
Indoor/Outdoor Remote Temperature Sensor

Related Links
HVAC Zone Controllers
Thermostat Wire

• Single stage heating and cooling systems, non heat pump
• 1 stage heat, 1 stage cool
• Backlit
• Can be set to heat only or cool only
• Adjustable anticipator
• Can power steal for retrofitting heat/cool systems with only 4 wires
• Use for forced air, radiant heat, hydronic heat, steam, electric, gas, oil, etc
• RS-232 capable
• Auto changeover (will switch from heat to cool automatically)
• Programmable (if used stand alone, thermostat can be programmed for weekdays, Saturday and Sunday - 4 times per day)
• High and Low setting limits
• Outdoor temperature display (when connected to Omni, OmniPro or other system)
• Time display - time is displayed and is set automatically when connected to Omni, OmniPro or other system
• Filter reminder - tracks time that fan has run, indicates “FILT” to suggest changing filter
• Day/Night mode (a simple way to set preprogrammed day and night temperatures by remote control)
• No batteries - all memory is non-volatile
• Are UL and EPA Energy Star listed
• Celsius or Fahrenheit, 24 hour or AM/PM time format
• Dimensions: 5.5" W x 3.75" H x 1.1" D

• Single Stage Heat Pump Heating and Cooling System (1 Stage Cool, 2 Stage Heat).
• Compatible with systems using 24 volt (24-30VAC) controls.
• Adjustable cycle times and anticipation for heat and cool.
• Non-volatile program memory, no batteries.
• Back-lit display.

• Two Stage heating and cooling systems (Not heat pumps)
• 2 stage heat, 2 stage cool
• Backlit
• Energy Efficient Control of second stage (EEC can be turned off if not desired)
• Automatic anticipator
• Use for Forced Air systems with two speed furnace, Two Speed air conditioner, Two Stage furnace and/or two stage air conditioner, electric, gas, oil or other fuel.
• Auto changeover (will switch from heat to cool automatically)
• Programmable (if used stand alone, thermostat can be programmed for weekdays, Saturday and Sunday - 4 times per day)
• High and Low setting limits
• Outdoor temperature display (when connected to Omni, OmniPro or other system)
• Time display - time is displayed and is set automatically when connected to Omni, OmniPro or other system
• Filter reminder - tracks time that fan has run, indicates “FILT” to suggest changing filter
• Day/Night mode (a simple way to set preprogrammed day and night temperatures by remote control)
• No batteries - all memory is non-volatile
• Are UL and EPA Energy Star listed
• Celsius or Fahrenheit, 24 hour or AM/PM time format
• Dimensions: 5.5" W x 3.75" H x 1.1" D

• Elegantly slim decorator styling
• Dual temperature settings
• Day/Night mode selectable manually or by external contact closure
• Full normal HVAC control
  • 300201: 1 heat/1 cool, Auto Changeover
  • 300202: 3 heat/2 cool or 1 heat/1 cool heat pump, Auto Changeover
• Outdoor sensor option
• Remote indoor sensor option
• Automatic heat/cool changeover, when selected
• Easy-to-read vertical LCD displays room temperature, mode of operation, and whether heating, cooling, or fan is currently on
• Electronic keypad lockout mode only allows minor changes that automatically revert after 90 minutes. Cover is lockable to prevent tampering.
• Easy installation and hookup
• Battery backup not required - Thermostat always retains latest setting and mode no matter how long the power is out!
• Operating voltage: 20 - 30 VAC nominal
• Color: White
• Dimensions: 4.5" H x 4.0" W x.851" Deep
• 300201 Installation Data Sheet(PDF)

There are two basic ways to hook up this thermostat: Run the two wires to a Universal Module.Plug in the Universal Module and you can send X-10 commands from any X-10 controller (including a telephone transponder) to operate the thermostat. This mode is quite popular with the "mountain cabin" folks. Imagine calling your cabin from your cell-phone while on the way to tell it to warm up the place! And always being assured that, when away, the thermostat will not let the pipes freeze.

• Elegantly slim decorator styling
• 7 day programmable
• 3 hour override capability -- Allows temporary adjustment of temperature
• EEPROM Memory -- Electronic memory storage with no batteries to replace
• Contemporary design -- Fits into any decor
• Lockable keypad and front door -- Two levels of security against unwanted tampering
• O & B terminals on 300227 models -- For use with heat pump or controlling dampers and fresh air economizers
• Auto Changeover -- Automatically switches between heating and cooling system to maintain comfort
• Compressor Short Cycle Protection -- Preserves integrity of HVAC system
• Remote Sensor Compatible -- Connects to optional remote indoor or outdoor sensors for optimal comfort
• 4 or 2 events per day -- Customize for complete comfort
• Smart Fan -- Selectable fan operation for each event of the day
• Copy Feature -- Fast easy copying of program from one day to another
• Full normal HVAC control
  • 300225: 1 heat/1 cool, 7-Day Programmable, Auto Changeover
  • 300227: 3 heat/2 cool or 1 heat/1 cool heat pump, 7-Day Programmable, Auto Changeover
• Easy-to-read vertical LCD displays time, room temperature, mode of operation, and whether heating, cooling, or fan is currently on
• Easy installation and hookup
• Operating voltage: 20 - 30 VAC nominal
• Color: White
• Dimensions, 300225: 4.5" H x 4.0" W x.851" Deep
• Dimensions, 300227: 4.5" H x 5.0" W x.851" Deep
• Wiring Diagram, 300225: Diagram 1 Diagram 2
• Wiring Diagram, 300227: Diagram 1 Diagram 2

Standard features include automatic changeover, permanent memory retention during any type of power outage, 3-hour temporary temperature override and Smart Fan that allows selectable fan operation for each programming period.

The 300227 also incorporates additional relays for the control of dampers or economizers, making them completely flexible for commercial applications.

• Elegantly slim decorator styling
• For use with models 300201, 300202, 300225, 300227.
• Indoor sensor dimensions: 3.5" x 2.5" x .75"
• Outdoor sensor is in two pieces, indoor piece same as indoor sensor, outdoor piece is weatherproof probe.
• Indoor Sensor Installation Instructions(PDF)
• Outdoor Sensor Installation Instructions(PDF)

• Elegantly slim decorator styled thermostat replaces your existing thermostat and connects to the same (4) wires.
• Controller unit, power supply (included), and TW523 (included) installs back at the HVAC unit.
• Full Manual control at thermostat
• 32 Remote X-10 commands adjust thermostat mode, temperature setting, and setback.
• Bi-directional--can send/receive X10 commands via a 512 command extended code table
• Automatic heat/cool changeover, when selected
• Easy-to-read backlit LCD displays room temperature, mode of operation, and whether heating, cooling, or fan is currently on
• For standard gas/electric or heat pump HVAC systems; 2 stage heat, 2 stage cool for gas/electric. 3 stage heat 2 stage cool for heat pump.
• Replaces existing 4 or more wire thermostats without the need for additional wiring
• Adaptable to hydronic, radiant and other types of independent heating and/or cooling systems
• Color: White
• Thermostat Dimensions: 5.0" H x 3.2" W x.8" Deep
• See manufacturer's website for manuals, wiring diagrams, specifications, and application notes. (Click on RCS logo above.)

For control, you can adjust the mode and temperature setting at the thermostat, send X-10 commands manually from any X-10 controller or from a whole-house controller such as ActiveHome or HomeVision.

Sensor is only 1.5" X 2" X 1" Thick.

• Elegantly slim decorator styled thermostat replaces your existing thermostat and connects to the same (4) wires.
• Controller unit and power supply (included) installs back at the HVAC unit.
• Full Manual control at thermostat
• 23 supported messages provide full remote access
• Automatic heat/cool changeover, when selected
• Easy-to-read backlit LCD displays room temperature, mode of operation, and whether heating, cooling, or fan is currently on
• For standard gas/electric, 2 stage heat/2 stage cool or 3 stage heat/2 stage cool heat pump HVAC systems
• Replaces existing 4 or more wire thermostats without the need for additional wiring
• Adaptable to hydronic, radiant and other types of independent heating and/or cooling systems
• Color: White
• Thermostat Dimensions: 5.0" H x 3.2" W x 0.8" D.
• See manufacturer's website for manuals, wiring diagrams, specifications, and application notes. (Click on RCS logo above.)

For control, you can adjust the mode and temperature setting at the thermostat, or send RS485 commands from a whole-house controller such as HomeVision or a PC.

Remote temperature sensor available.RS15.