You must set your browser to accept cookies and to enable Javascript in order to access certain functions of this site.

Low-Voltage Power Supplies

DC Power Supplies
12VDC, 400mA, Regulated
12VDC, 200mA, Regulated
12VDC, 1600mA, Regulated

AC Transformers
16.5VAC, 45VA Transformer
24VAC, 40VA Transformer
24VAC, 144VA Transformer

AC to DC Converters and Chargers
6/12/24VDC Power Supply/Charger Board

Low-Voltage Power Distribution
9-Device Power Distribution
9-Camera 12VDC Power Supply
DC Power Distribution Bracket

DC Power Supplies

Channel Vision Authorized Seller Click To Verify

5015PS
12V DC 400mA Regulated Power Supply

Input: 120VAC 60Hz
Output: 12VDC 400mA Regulated
Connector: 2.1mm Coaxial Plug
Works for most IR distribution systems.
More power at less cost than 781RG below.

Xantech
Authorized Xantech Dealer

781RG
12VDC Regulated

Input: 120VAC 60Hz 7W
Output: 12VDC 200mA Regulated
Connector: 2.1mm Coaxial Plug
Our most popular power supply!
Works for smaller IR distribution systems.

P1216
DC Power Supply
12VDC, 1.5A, Regulated

Switching Power Supply
Regulated 12VDC Output
Six foot cord and standard 2.1mm x 5.5mm x 9mm plug (plug center is positive)
UL Listed
Lifetime Limited Warranty
DC Output Voltage: 12 Volts DC
Current Rating: 1.5 Amps
AC Input Voltage Range: 100 -240 @ 50~60Hz
Size: 3"H x 2"W x 1.75"D
Our second most popular power supply!
Works for larger IR distribution systems.
Equivelent to Xantech's 78200 (782-00) power supply.

AC Transformers

TRG1640
AC Transformer
16.5VAC, 45VA

Home Automation magazine has chosen ELK's AC Transformers as one of it's Top 50 Editors' Picks for 2003!

Auto-Resetting (PTC) Fused Secondary
Green Power On LED
Grounding Prong & Terminal
Electrical outlet mounting tab
UL Listed
Wire Strain Relief
Lifetime Limited Warranty
Output Voltage: 16.5 Volts AC
Input Voltage: 120 VAC, 60Hz, .43W
Output Power: 45 VA
Size: H=4.14"(105), W=2.74"(70), D=2.2"(56)
Color: White

TRG2440
AC Transformer
24VAC, 40VA

Home Automation magazine has chosen ELK's AC Transformers as one of it's Top 50 Editors' Picks for 2003!

Auto-Resetting (PTC) Fused Secondary
Green Power On LED
Grounding Prong & Terminal
Electrical outlet mounting tab
UL Listed
Wire Strain Relief
Lifetime Limited Warranty
Output Voltage: 24 Volts AC
Input Voltage: 120 VAC, 60Hz, .43W
Output Power: 40 VA
Size: H=4.14"(105), W=2.74"(70), D=2.2"(56)
Color: White

F260U
AC Transformer
12/24VAC, 144VA

Output Voltage: 24 Volts AC (12VAC On Center Tap)
Input Voltage: 120 VAC, 60Hz
Output Power: 144 VA (6.0 Amps)
Size: H=3.75, W=3.127", D=3.5"
Connections: All connections stripped wire.

A bare-bones chunk of iron! And just as reliable! Use this single supply for all your low-voltage AC needs. Connect between an end and the center tap for 12VAC and between both ends for 24VAC. Use the 24VAC to power all your thermostats, dampers, and doorbell. Use the 12VAC for all those other devices that need that voltage. For a really slick setup, use with one or more PD9's (below) for distribution.

AC to DC Converters and Chargers

P624
6 , 12 , or 24 Volt DC Power Supply & Battery Charger

Selectable 6, 12, or 24 Volts DC Operation
Automatic Resetting "fuseless" Overload Protection (PTC)
Visual AC and DC Power Indicators
Built-In Battery Charge Circuit
Small, Compact Size
Includes Double Sided Mounting Tape
AC and DC Surge Suppression
Lifetime Limited Warranty
6VDC Setting:
- Current Rating: 1.2A
- Requires 12V, 40VA Transformer
12VDC Setting:
- Current Rating: 1.0A
- Reuqires 16.5V, 40VA Transformer
24VDC Setting:
- Current Rating: 800mA
- Requires 24V, 40VA Transformer
Standby Battery Capacity (optional): 1.2 to 10 AH
Size: 3" X 3" (76.2mm X 76.2mm)
Instruction Manual

The ELK-P624 is a general purpose regulated power supply and battery charger. It is ideal for alarm, access control, and CCTV applications requiring up to 1 Amp continuous current. Automatic resetting "fuseless" overload protection means never having to return to a job site to replace a blown fuse

On-board diagnostic LEDs indicate the presence of the AC charging and DC output voltages. The output voltage can be set with a mini-jumper.

Low-Voltage Power Distribution

PD9
Power Distribution Module

Auto-Resetting (PTC) Overload Protection (NO FUSES to REPLACE)
Master Power On/Off Switch
Visual LED Power Indicators on Input and each Output
Convenient Test Points for measuring Total Current Draw
Lifetime Limited Warranty
Paintable White Plastic
Max Current Draw: 250mA from each output
Max Combined Current Draw: Not to exceed Input Power Source or 2.3A
Input/Output Voltage: 6 to 30 Volts AC or DC
Input Connection: Screw Terminals or 2.1mm Plug-In DC Jack
Output Connection: Screw terminals (POS and NEG) for each output
Enclosure Size: 6.5" x 4.3" x 2"
Note: The PD9HC is rated 400mA output

The Power Distribution Module conveniently converts a single AC or DC input into nine individual outputs to centrally power Video Cameras, PIRs, Photobeams, etc. Each output is protected with 250mA auto-resetting PTCs to protect any shorted output from disabling the other outputs. The module has visual LED power indicators on each output and a Master Power On/Off Switch with LED on the input. The module requires a 6 to 30 volt AC or DC power source (not included) which connects either to a terminal block or a 2.1mm DC power jack located on the module. Outputs can be combined for more current.

EL-PD9 Power Distribution to 9 Device		$42.79 each	Enter Qty each
EL-PD9HC Power Distribution Unit High C Nine 400MA Outputs. Total Max Special Order Item	List 50.00 each	$42.79 each	Enter Qty each

PD9DC12
9-Camera Power Distribution Module

Auto-Resetting (PTC) Overload Protection (NO FUSES to REPLACE).
Master Power On/Off Switch.
Visual LED Power Indicators on Input and each Output.
Convenient Test Points for measuring Total Current Draw.
Lifetime Limited Warranty.
Paintable White Plastic
Max Current Draw: 250mA from each output.
Max Combined Current Draw: Not to exceed 1.6A
Input/Output Voltage: 12 Volts DC
Input Connection: Screw Terminals or 2.1mm Plug-In DC Jack
Output Connection: Screw terminals (POS and NEG) for each output
Enclosure Size: 6.5" x 4.3" x 2"

The DC Camera Power Distribution Kit conveniently powers up to nine (9) 12 Volt DC cameras. Each camera output is protected with a 250mA auto-resetting PTC to protect any shorted output from disabling the other outputs. The PD9 module has visual LED power indicators on each output and a Master Power On/Off Switch with LED on the input. Outputs can be combined for more current. Kit includes: (1) Power Distribution Module (ELK-PD9) and (1) 12 Volt DC plug-in Power Supply (EL-P1216).

48212-DC
DC Power Distribution Module

Contains six removable double screw terminal jacks.
Each Jack utilizes slot-drive screws.
Shipped with 6 wires containing 18 gauge connectors and 2.5 mm power plugs.
Fully regulated 13VDC 1800mA power supply. (For 12VDC cameras...the extra volt is to allow for expected voltage drop in each run.)
May be used in a Leviton Structured Media Cabinet or (cut off the plastic "pop-rivets") for attachment with screws or tape to any surface.
Specifications(PDF)
Installation Manual(PDF)

The DC power distribution module is a unique solution to the need for high quality electrical power for the separated DC powered components in the structured media center (SMC). This module reduces clutter and opens up space in the SMC by eliminating the need for multiple DC transformers. Powered by a single DC power supply, the power distribution module provides fully-regulated 12VDC power for up to 6 devices.

Perfect also for powering multiple cameras and modulators!

Join Our Mailing List

Orders: (888) 257-4406	HomeTech Solutions MAP DIRECTIONS HOURS	Phone: (408) 257-4406 Fax: (408) 257-4389 Other Contact Info