EIA 19 Inch Racks

• Same strength as a welded enclosure.
• Each version is equipped with 2 pairs of fixed 11-gauge, 10-32 threaded rackrail front and rear.
• Heavy-Duty 14-gauge (.078) steel top and bottom.
• 1/2" & 3/4" rear electrical knockouts.
• Capable of being ganged together (as shown) with or without optional cable chase kit.
• Several options available for aesthetic customization.
• Exceptional rigidity and strength.
• Overall width: 19 - 1/8"
• Available in 20" and 26" depths.

The Slim 5 Series can accomodate Vertical Power Strips.

• Rear hinge allows unit to swing open for easy access to rear of components.
• Hinge can be mounted on left or right side.
• 1/8" thick 10-32 threaded rails.
• 17" outside depth unit has 15" useable inside depth.
• 22" outside depth unit has 20" useable inside depth.
• 26" outside depth unit has 24" useable inside depth.
• Durable black textured powder coat finish.
• Weight capacity: 200 lbs.
• Locking plexiglass door optional.

Offering unparalleled access to component rear panels, the data wall cabinet features and advanced cable management system residing in the center and rear sections. Additionally, the rear section can be easily separated from the center section for pre-mounting on the jobsite.

• Tool-Free Quick-Mount; system allows for easy, one-person mounting of the center section to the backpan on the jobsite
• Welded construction provides 150 lb. weight capacity
• Available in 15" and 20" useable depths
• Center section hinges for left or right opening
• Abundant lacing points throughout the interior facilitate cable management
• 1/2",3/4",1", & 1 1/2" electrical knockouts and 5/8" UHF/VHF antenna knockouts on top & bottom, easily removable for cable pass-through
• 10 1/2" x 10 1/2", laser knockout opening in the backpan for electrical pull-box
• Durable black textured powder coat finish

	User Manual

• A great choice for wall mounting patch panels and network equipment.
• Easy rear access.
• Tie Points for cable management.
• Hook and loop cable fasteners.
• Rack screws and velcro tie loops included.
• Available in three sizes.
• Optional Door & Top available.

• Self-aligning design speeds assembly
• Rugged steel construction
• 1/8" 10-32 threaded rackrail
• Rackscrews included
• Durable black powder coat finish

	Manual

Steel rack rails are 10-32 threaded and sold in pairs.

• Incorporates a self-squaring design which greatly speeds assembly
• Threaded for 10-32 screws
• Channels made from 11-gage steel to provide extra strength
• Overall height: 84" (RL1045)
• Racking height: 45 space (RL1045) 38 space (RL1038)
• Weight capacity: 150 lbs.
• Finish: black powder coat
• Includes 50 rack screws

• Cable organizers designed to work with the 84" RL1045 rack (above)
• These wire management ducts are designed for superior style and function
• Built to handle extra-large cable bundles while providing simple distribution provisions front and rear
• Channel dimensions: 6" W x 9" D (4 1/2" front, 4 1/2" rear)
• Strategically placed lacing points with abundant front to rear cable openings.
• Optional split covers enhance appearance.
• CENTER units are intended to be bolted between racks, and allow front and rear cables to exit either left or right
• END units facilitate left or right cable exit as well, each of which is selectable by turning the duct when mounting
• ORGANIZER COVERS can be added to produce a clean appearance, but are optional. Covers fit both center and end units, hang off to the side when removed, and are split for quick access.
• Finish: black powder coat

• Provides simple and straightforward wall-mounting of rackmount components.
• Hinged to provide rear access to mounted components.
• Each of the 1, 2, 4, and 6 space units are 6" deep.
• Built-in lacing points.
• Rack screws included.
• Finished in a durable black powder coat.
• HPMLID is a dust-cover/modem shelf that sits on top of any HPM.

• Allows mounting of equipment in a vertical "knobs up" fashion
• Equipment mounts to backpan for even weight distribution
• 1/2" & 1-1/2" laser knockouts in the backpan top and bottom
• Hinged top cover allows user access to controls
• Hinged body allows installer access to connections
• Top cover and body lock, and are keyed separately
• Two bottom located fan mounting positions with guards (fans not included)
• Vented front for cooling
• Adjustable front rackrail provides 20” to 23” useable equipment depth
• 150 lb. weight capacity
• Finished in a durable putty (WRP) or black (WRS4) powdercoat
• A&E Specifications (PDF)