Modular Power Raceway System
Design And Build Your Own Custom Power Strip Using Off-The-Shelf Components
Need a custom power strip fast?With our new MPR Series, you can design and build a custom power distribution system to your specifications! As easy to configure in the field as it is in the shop, our new modular power system provides the broadest selection of circuit and control options, and utilizes a proprietary pre-terminated interconnect system that snaps together in a fraction of the time it takes to custom hard wire other raceway products.
The MPR series is comprised of power modules, raceways, interconnect cables, and a sequencing controller. The concept is to mix and match power modules appropriate for your application.
You Design It- simply select the number of circuits and amperage/outlets required, and choose the appropriate modules for the job. Decide whether to use our flexible sequencing control system (USC-6R) or use any control system that provides 12 volt DC or contact closure outputs.
You Build It- use our pre-terminated cables to connect modules (no hardwiring required!), and install the modules in the appropriate raceway.
Easy Installation- raceways install quickly into racks utilizing our unique “quick-clip” mounting method.
How to Order
 A fully configured raceway consists of at least four components:
- one MPR raceway - accepts 3, 6, or 9 MPR modules
- one or more MPR power modules - provides 1 duplex outlet per module
- J series AC jumpers - interconnects same-circuit modules
- at least one T series tail - connects raceway circuit to main power
Example
| If you require a raceway that contains 4 remote sequenced 20 amp isolated ground outlets, 8 remote sequenced 15 amp outlets on a second circuit, and you need local switch sequence control, you will need to order:
- [A] (1) MPR-6 raceway
- [B] (2) RLM-20IG 20 amp modules
- [C] (4) RLM-15 15 amp modules
- [D] (1) J-12X6 jumper (sold in packs of 6 - 4 req'd.)
- [E] (1) T-24X6 connector with tails (sold in packs of 6 - 1 req'd.)
- [F] (1) T-80X6 connector with tails (sold in packs of 6 - 1 req'd.)
|
For more information, consult the
specification sheet. (PDF)
|
Power Modules |
| Part # |
Amperage |
Control |
Status |
|
| RLM-15
|
15
| Remote 12VDC
Dry Contact
Local Switch
| LED
Dry Contact
|
 |
|---|
| RM-15
|
15
| Remote 12VDC
| LED
Dry Contact
|
|
|---|
| R-15
|
15
| Remote 12VDC
| None
|
|
|---|
| M-15
|
15
| Always On
| None
|
|
|---|
| | Switchable power modules allow quick and easy shop or field wiring of vertical power raceways. An extensive selection of both 15 amp and 20 amp modules allow the installer to configure each raceway to fit the application, with single or multiple circuits and a choice of control options. All modules utilize a unique genderless 30 amp coupler to daisy-chain AC power to other modules on the same circuit. Modules fit our MPR Series raceways, are manufactured from galvanized steel and feature a durable min-spangle finish.
| |
|
J-12X6
J Series Jumpers |
|
- Jumper length 12"
- Termination: Connector on each end
- Sold in packs of six
| | J series jumpers connect power modules, providing AC power to all modules on the same circuit.
Pre-terminated jumpers feature convenient genderless 30 amp connectors at both ends and are sold in packs of six.
| |
|
T-80X6 T-24X6
T Series Tails |
|
- Jumper length 24" (T-24X6) and 80" (T-80X6)
- Termination: Connector on one end, tails on the other
- Sold in packs of six
| | T series tails connect incoming power to a single circuit within a raceway. One tail required per circuit. Each tail features a pre-terminated 30 amp connector that plugs in to a module at one end, and wire tails for J-box
connection on the other. Sold in packs of six.
| |
|
|
