Brackets Universal Clamps Flat Mounting Brackets PCB Mounting Bracket Grid Lifting Bracket Hinged Rack Panel Grid Lifting Wire Management Module Miscellaneous Modules Powerstrip IR Distribution Module

Related Links Channel Vision Central Main Page Enclosures Phone and Network Modules Coax and Modulator Modules Audio Modules Satellite Distribution Modules Channel Vision Central Catalog High Resolution (11.38MB PDF) Low Resolution (2.94MB PDF)

Mounting Brackets

Channel Vision Authorized Seller Click To Verify C-1311 C-1312 Universal Clamp Brackets	C-1311 C-1312
C-1311: Half-width (6") universal mounting clamp. Opening is 5 1/4" wide by 2" max depth. (By flipping the clamp, max depth is increased to 3 1/4" with a max width of 4 1/4".) C-1312: Full-width (12.5") universal mounting clamp. Opening is 11 3/4" wide by 2" max depth. (By flipping the clamp, max depth is increased to 3 1/4" with a max width of 10 3/4".) Padded clamp face is 2 1/2 high. One edge of clamps is flat, the other edge has 1/4" lip. Mount your product oriented whichever way works best. Holds square or irregularly shaped items.
CV-C1311 Universal Product Holder Fits items up to 4.75in wide by 3.25in thick For ordering information, please see this item on our current website.   CV-C1312 Universal Product Holder Fits items up to 11.25in wide by 3.25in thick For ordering information, please see this item on our current website.

Channel Vision Authorized Seller Click To Verify C-1320 Grid Lifting Bracket	View a photo in use.
Simple device makes a world of difference inside your cabinet! Lifts modules 3/4" above existing grid, allowing you to run wires out of the way, below the modules. Get several! Makes routing wires much easier and makes your finished cabinet look much neater! Has an array of 6" and 12.5" spaced holes with universal hole shapes that work with many other manufacturer's modules and cabinets!
CV-C1320 Grid lifting Wire Mgmt Module Fits items up to 4.75in wide by 3.25in thick For ordering information, please see this item on our current website.

Channel Vision Authorized Seller Click To Verify P-1300 Hinged Rack Panel
Sturdy Steel Construction Allows mounting of Channel Vision Pro modules in a 19" rack. Can be mounted with modules facing front or rear. When facing rear, hinges open to maintain a clean look Use with C-1320 above to mount all Channel Vision modules and most other manufacturers' modules.
CV-P1300 Hinged Rack Plate For ordering information, please see this item on our current website.

Channel Vision Authorized Seller Click To Verify C-1321 Grid Lifting Wire Management Module
Sturdy Steel Construction Creates a second grid layer in the structured wiring enclosure For use with the C-1338 and C-1351 extension rings only Use up to two with a C-1350
CV-C1321 Grid lifting Wire Mgmt Module Creates 2nd Grid Layer Use w/ C1338 or C1351 For ordering information, please see this item on our current website.

Channel Vision Authorized Seller Click To Verify C-0308 C-0309 Mounting Brackets	C-0308 C-0309
C-0308: Full width (12.5") by 5" high mounting plate. C-0309: Half-width (6") by 9" high mounting plate. Various tapped screw holes. Or use tie-wraps to mount your own equipment.
CV-C0308 Mounting Bracket 12x5.5 in for Chan Vis Series C-0xxx Pnl Double wide by 5.5 inches For ordering information, please see this item on our current website.   CV-C0309 Mounting Bracket 6x9 in for Chan Vis Series C-0xxx Pnl Single wide by 9 inches For ordering information, please see this item on our current website.

Channel Vision Authorized Seller Click To Verify C-1327 PCB Mounting Plate	Larger View
Clever panel suspends a hard "foam-core" layer. Mount your PCB with a screwdriver. No drilling! No nuts! Supplied self-tapping screws and standoffs firmly mount your circuit board. Supports boards up to 5.75" x 11.0"
CV-C1327 Universal PCB Mounting System For ordering information, please see this item on our current website.