|
900A-50
Economy DSL In-Line Alarm Filter |
|
|---|
- Simple installation
- Automated alarm dialer compatible high-speed Internet device
- FCC Registered; Complies with Part 68, FCC Rules
- UL Listed; Standards - 1863
- Data Sheet (PDF)
| |
The 900A alarm filters are designed to allow residential alarm panels to take control of the main phone line via the RJ31X or RJ38X connector. The 900A blocks DSL service to the alarm panel while providing uninterrupted DSL service to the household telephone wiring. This inline filter is designed to plug into a RJ31X jack, including other similar jacks up to RJ38X.
This filter is a direct replacement for the Z-A431PJ31X filter shown below. Save $5 with this "generic" equivalent.
| |
Note: Web only special! We will not sell this filter over the phone!
|
Z-A431PJ31X
Z-Blocker Self-Install DSL Alarm Filter |
|
|---|
- Simple plug-in installation.
- Compatible with all major ADSL, HPN, and alarm systems.
- Works with either RJ31X or RJ38X jack.
- Made by the same folks that most likely made your other self-install filters: Excelsus Technologies.
- Allows full-speed DSL operation...even when alarm system siezes the line.
- Does not disrupt or limit alarm system operation in any way.
- Manufacturer's cut sheet: Page 1 Page 2
|
Please read before calling:
Do you need this filter?
If you have DSL, and you have a security system that connects to the same line, then you need this filter.
Can anyone install this filter?
If your alarm system connects to the phone line through an "RJ31X" jack (looks like a standard phone jack, only a bit bigger), then you can install this filter. Click, click, and you're done!
If you don't have an RJ31X jack, you'll have to get your security company to install one first.
What if this doesn't fix my problem?
We sell hundreds of these filters a week and the vast majority of buyers are completely satisfied. In the unlikely event that you are not, you can call for an RMA within 30 days, return the filter, and receive a full refund (except shipping.)
Why is our part number slightly different?
Excelsus's part number is too long for our computer! That's all.
Don't forget to test your security system after installation!
|
ZA431PJ31X
ZA431PJ31XA
Online ordering is fast, easy, secure, and more accurate than calling in an order!
| |
Z-275P2J
Z-Blocker Dynamic DSL Filter |
|
|---|
- Filters one or more phone devices sharing a single jack
- Active only when the phone device is off-hook to minimize capacitance, thereby allowing maximum DSL performance
- Blocks DSL/HPN signals from phone equipment to enhance voice-band signal
- Isolates DSL/HPN from phone equipment impedance for peak data performance
- Ideal for blocking RF interference from DSL for uninterrupted data streaming
- Supports G.lite, G.dmt, ADSL, V.90, Caller ID and metallic-loop testing
- Compliant and listed with FCC, UL, CE, CSA and T1E1
- Compact in-line design plugs into any standard phone jack
- Provides separate jacks for phone and DSL/HPN
- Simple plug-in installation.
- Made by the same folks that most likely made your other self-install filters: Excelsus Technologies.
- Manufacturer's cut sheet (PDF)
| |
Premium dynamic in-line filter for phones or telephone equipment sharing a single phone jack and more than five phone jacks in use. May also be used in homes with fewer than five phone jacks in use. Isolates DSL and home phoneline networking (HPN) signals from voice signal for peak data performance and voice quality. Ideal for blocking radio frequency (RF) interference from cordless phones and other sources for uninterrupted video/audio streaming and games. Effectively filters one or more phone devices (standard or cordless phone, answering machine, dial-up modem, fax machine, etc.). Use one filter at each phone jack in use in the home or office.
Twin-jack design for use with both phone and DSL or HPN devices. Easy to install-just plug the filter cord into any standard phone jack, and plug the DSL/HPN cord and phone cord into the filter. Provides one unfiltered jack for DSL/HPN plus one filtered jack for any phone device.
|
| |
Z-330P2J
Z-Blocker Single Line DSL Filter |
|
|---|
- Meets ANSI T1.421 for excellent voice quality and performance
- Filters one or more phone devices sharing a single jack
- Blocks DSL/HPN signals from phone equipment to enhance voice-band signal
- Isolates DSL/HPN from phone equipment impedance for peak data performance
- Ideal for blocking RF interference from DSL/HPN for uninterrupted data streaming
- Supports all major xDSL standards including VDSL; plus V.90, Caller ID and metallic-loop testing compatible
- Compliant and listed with FCC, UL, CE, and CSA
- Compact in-line design—plugs into any standard phone jack
- Plug and jacks have minimum of 50 microinches of gold plating to prevent corrosion and ensure reliable electrical connections
- Manufacturer's cut sheet (PDF)
|
Same filter that is currently provided in SBC DSL Installation Kit. High-performance in-line DSL filter for phones or telephone equipment sharing a single phone jack. Meets ANSI T1.421 standards for voice quality and data performance with five filters on the line. Isolates DSL and home phoneline networking (HPN) signals from voice signal for peak data performance and voice quality. Effectively filters one or more phone devices (standard or cordless phone, answering machine, dial-up modem, fax machine, etc.). Use one filter at each phone jack in use in the home or office. Easy to install without tools—just plug the filter cord into any standard phone jack, and plug the phone cord into the filter. Provides a filtered jack for any single-line phone device plus a second unfiltered jack for DSL/HPN connection. The short, detachable cord lets user connect the filter to long phone cords in hard-to-reach areas such as behind heavy furniture or desks.
|
| |
ZD250P2J
Dual-Line DSL Filter |
|
|---|
- Filters one or more phone devices sharing a single jack on line 1 and line 2
- Blocks DSL/HPN signals from phone equipment to enhance voice-band signal
- Isolates DSL/HPN from phone equipment impedance for peak data performance
- Supports G.lite, G.dmt, ADSL, V.90, Caller ID and metallic-loop testing
- Compliant and listed with FCC, CS03, UL, CE and CSA
- Compact in-line design—plugs into any standard phone jack
- Provides separate jacks for phone and DSL/HPN
- Plug and jacks have minimum of 50 microinches of gold plating to prevent corrosion and ensure reliable electrical connections
| |
Same filter that is currently provided in BellSouth DSL Installation Kit. In-line filter for phones or telephone equipment sharing a two-line phone jack. Isolates DSL and home phoneline networking (HPN) signals from voice signal on both lines for peak data performance and voice quality. Effectively filters one or more phone devices (standard or cordless phone, answering machine, dial-up modem, fax machine, etc.) on line 1 and line 2. Use one filter at each phone jack in use in the home or office. Easy to install—just plug the filter cord into any standard phone jack, and plug the phone cord into the filter. Provides one unfiltered jack for DSL/HPN plus one filtered jack for any single or two-line phone device.
| |
|
649A-1
Economy DSL POTS Splitter |
|
|---|
- Splits raw telephone company signal into DSL and voice lines.
- FCC Registered; Complies with Part 68, FCC Rules
- UL Listed; Standards - 1863
- Data Sheet (PDF)
| |
The 649A1 splits the incoming signal to provide separate outputs for filtered voice (phone) and ADSL (data), in the form of screw terminals, eliminating any impedances that interfere with communications. The Outdoor POTS Splitter is designed to be mounted on a wall or conduit next to a Network Interface Device (NID).
| |
|
SPSH70SR1
ADSL POTS Splitter w/Enclosure |
View Opened
|
|---|
- Simple screw-terminal installation.
- Outdoor housing for wall or conduit mounting.
- Wiring terminals for each splitter port (NETWORK, VOICE, DATA).
- ANSI T1.413 Compliant, UL Listed, FCC Part 68 Compliant.
- Environmentally hardened.
- Can be used in wiring closets.
- Manufacturer's spec sheet.
|
| |
| |
|
