Punchdown Blocks

• 6 x 6 punchdown block. (6 rows of 6 connections each row.)
• Connect three outside lines to up to five locations each.
• Includes snap-on cover.

• Standard non-split M-Block.
• Contains 50 rows, each with a single clip having four slots.

• Holds one 40066M25 above.
• Allows routing wires behind M-Block

• Snaps onto 40055M25.
• Holds wires securely and allows easy labling of each pair.
• Note: A Designation Strip and the Clear Cover cannot both be used on a punch-down block.

• Snaps onto 40066M25.
• Holds wires securely and keeps dust and grime from contacts.
• Note: A Designation Strip and the Clear Cover cannot both be used on a punch-down block.

Sold in single blocks: 4Pair or 5Pair.

• Economical solution to connecting phone wires.
• 4 Lines to 12 home-run locations.
• Up to 48 total lines distributed.
• Serves as a Home Distribution Device as required by ANSI/TIA/EIA.
• Built-in wire management hooks and tiedown loops.
• 110 style connections. (Requires punchdown tool, sold separately.)
• Includes panel, cover (not waterproof), 12 home-run labels, instructions, and 4 mounting screws.

• Similar to the DD1C above but raised on standoffs and slightly larger for easier wiring.
• Cat. 5E RATED as required by ANSI/TIA/EIA.
• Accomodates up to 4 incoming phone lines.
• Allows up to 40 Outlet cables or phone home runs (10 for each incoming line).
• Internally bridged - No bridging clips required.
• Designed for consisitent repetitive wiring.
• 110 style connections. (Requires punchdown tool, sold separately.)
• Stands 1" off mounting board to be wired form the back for clean organized appearance.
• Includes panel, cover (not waterproof), mounting screws, lables, and instructions.
• Dimentions 6.25" by 6"
• Patent pending.
• Made in U.S.A.

• Fits in a standard 3-gang low-voltage ring
• Telephone distributes of 4 lines to 7 locations
• RF distribution to 4 locations
• Instruction Sheet (PDF)

• Field-configurable with a choice of QuickPort snap-in modules for voice, data, audio, security, or home automation applications. (Modules sold separately.)
• Snap-in module retention plates are accessible from the front side to simplify connector and cable administration.
• Comes with an 89D mounting bracket and port identification strips.
• Patch block is UL listed.

• Category 5e (GigiMax) rated.
• Easy punch-down; Panel reverses. Picture
• 89D Bracket Included
• Color Coded Port Identification Kit included
• Universal 568A/568B Wiring

• Category 5e rated.
• Easy punch-down; Panel reverses.
• 89D Bracket Included
• Universal 568A/568B Wiring

• Screws into wall with attached screw.
• Route wires cleanly and firmly.

• Ingenious cable has an 8 pin modular plug on one end and a 110 male plug on the other.
• 110 plug connects to all 8 wires on a 110 punchdown block.
• 568A wired.
• Category 5.
• 3 Feet long.
• Perfect for jumpering from a 110 punchdown block to an Ethernet hub.

• Ingenious cable has 110 male plugs on each end.
• 110 plugs connect to all 8 wires on a 110 punchdown block.
• 568A wired.
• Category 5.
• 3 Feet long.
• Perfect for jumpering from one point of a 110 block to another.