TechWire Telephone, Network, & TV/RF/Cable QuickPort Inserts

• 6 Conductors
• May be wired for RJ11C/RJ11W (one voice circuit), RJ14C/RJ14W (two voice circuits), or RJ25C (three voice circuits).
• Voice grade (Level 2).
• Color-coded type 110 punchdown connectors in rear.
• Snaps into any TechWire frame.

	Instruction Sheet
	Product Spec

• 8 Conductors
• May be wired for:
  RJ11C/RJ11W (one voice circuit),
  RJ14C/RJ14W (two voice circuits),
  RJ25C (three voice circuits),
  RJ45S (two wire computer networks),
  RJ48C (1.54 Mbps digital services),
  RJ48S (local area data channels),
  RJ61X/T568A/T568B (four voice circuits,
  ISDN, 10BASE-T and two voice circuits,
  16Mbps Token Ring, TP-PMD, or ATM).
• Category 5 compliant PowerSum. (Exceeds 100 Mhz).
• Exceeds ratings for 10 and 100Base-T Ethernet networks.
• Color-coded type 110 punchdown connectors in rear.
• Snaps into any TechWire frame.

• 8 Conductors
• May be wired for:
  RJ11C/RJ11W (one voice circuit),
  RJ14C/RJ14W (two voice circuits),
  RJ25C (three voice circuits),
  RJ45S (two wire computer networks),
  RJ48C (1.54 Mbps digital services),
  RJ48S (local area data channels),
  RJ61X/T568A/T568B (four voice circuits,
  ISDN, 10BASE-T and two voice circuits,
  16Mbps Token Ring, TP-PMD, or ATM).
• Category 5e compliant. GigaMax (exceeds 350 Mhz).
• Rated for 10Bast-T, 100Base-T and proposed GigaBit Ethernet networks.
• Color-coded type 110 punchdown connectors in rear.
• Snaps into any TechWire frame.

• 8 Conductors
• May be wired for:
  RJ11C/RJ11W (one voice circuit),
  RJ14C/RJ14W (two voice circuits),
  RJ25C (three voice circuits),
  RJ45S (two wire computer networks),
  RJ48C (1.54 Mbps digital services),
  RJ48S (local area data channels),
  RJ61X/T568A/T568B (four voice circuits,
  ISDN, 10BASE-T and two voice circuits,
  16Mbps Token Ring, TP-PMD, or ATM).
• Category 6 compliant. eXtreme. (Cat 6+)
• Rated for 10Bast-T, 100Base-T and proposed GigaBit Ethernet networks.
• Color-coded type 110 punchdown connectors in rear.
• Snaps into any TechWire frame.

Instruction Sheet (PDF)

• F-Type female coaxial connector.
• For upstream or downstream video, RF, satellite, or digital signal via RG6 or RG59 coaxial cable.
• CEBus Compatible (When used in pairs for upstream and downstream cables).
• F-Type female connector in rear.
• Snaps into any TechWire frame.
• Available with gold or zinc plating.

• Premium quality, gold plated.
• 5-Way binding post accepts stripped wire, banana plugs (2 ways), spade lugs, or ring lugs.
• Perfect for speaker level audio.
• Packaged in red or black singles.
• "Set-Screw" screw terminal for rear connection.
• Snaps into any TechWire frame.
• Matching Plugs.
• Available in White, Ivory, and Almond.
• Available with black or red stripe.
• See also: 8 5-Way binding posts in a Decora frame.

• Premium quality, gold plated.
• Accepts banana plugs.
• Perfect for speaker level audio.
• Packaged in red or black singles.
• "Set-Screw" screw terminal for rear connection.
• Snaps into any TechWire frame.
• Matching Plugs.
• Available with White, Ivory, or Almond base.
• Available with Red or Black stripe.
• See also: 8 banana jacks in a Decora frame.

• Premium quality, gold plated.
• Female RCA connector on each side.
• Perfect for line level audio.
• Packaged in red or black singles.
• Snaps into any TechWire frame.
• Available in White or Ivory base.
• Available with Red, Black, or Yellow designation stripe.

• Premium quality, gold plated.
• Female RCA connector on front.
• Two 110 punchdown locations on back.
• Use for line level audio, PCM audio, and line level video.
• Snaps into any TechWire frame.
• Available with Red (right), White (left), Orange (PCM), and Yellow (video) center color.
• Information Sheet (PDF)
• Instruction Sheet (PDF)
• Note 1: Maximum wire length: 40 feet.
• Note 2: Keep digital signal bundles separate from analog signal bundles.
• Note 3: Connector supports connectivity of up to two pairs. Use both pairs to reduce wire losses in runs over 20 feet.

• Female to Female BNC Inserts.
• Available in Gold or Tin plating.
• Available in White, Ivory, and Almond surround.

• Connects two male fiberoptic ST connectors.

• Fill unused positions in frames.
• Or drill out and mount your own connectors.
• * Indicates Color, White, Ivory, or Almond.

• Female S-Video (a.k.a. SVHS) jack in front. (4 pin mini-DIN.)
• Four 110 style punchdowns in back.
• Connect Category 5 cable (uses only 2 of the four pairs) between two of these jacks to run your S-Video signal through the walls up to 60 ft!
• For Decora S-Video connectors, click here

• Stereo 1/8" jack with solder terminals.
• Perfect for connecting line-level audio, infrared receivers, infrared emitters, and other low-voltage signals through a TechWire wallplate.
• Simply drill a 1/4" hole in a blank insert (immediately above, not included) and put in the jack.
• For ease of installation, solder 3" wires to the jack before installation. Then just crimp-connect these wires to the audio or control wires coming from the wall.

Solder line-level audio cable to the jack per this diagram.

Drill a 1/4" hole in a blank insert (immediately above, not included) and install the jack in the hole. (Note that you may need to countersink the back of the hole a little so that the jack sits completely flush.) Make sure that the nut goes all the way down and is flush with the connector center. Otherwise, the plug will not go in completely.

Snap the assembly into a quickport frame and screw the frame into the wall.

Use a 172-0003 1/8" phone plug to two RCA jack Y harness to "break out" line level audio to RCA connectors. The 172-0003 is wired like this.

Solder your IR cable (quad or cat5) to the jack per this diagram.

Drill a 1/4" hole in a blank insert (immediately above, not included) and install the jack in the hole. (Note that you may need to countersink the back of the hole a little so that the jack sits completely flush.) Make sure that the nut goes all the way down and is flush with the connector center. Otherwise, the plug will not go in completely.

Snap the assembly into a quickport frame and screw the frame into the wall.

Plug the IR pickup directly into the jack. By the way...the IR pickup plug is wired like this.