630S1xx
Dual Provider Switch |
|
|---|
Features- Customer operable switches.
- Single and Dual Line versions.
- Wire it once - no rewiring required if service turned back to incumbent.
- Switch is inset to avoid accidental switching.
- Plastic wall and PCB provide added protection from damage to wires and switches during installation.
- Available auxiliary jack, prewired to the "PROVIDER A" screw terminals (NOT controlled by the switch).
- Available in Single and Dual line
Specifications
| Contact | 50 micro inch hard gold plating minimum | | Terminals | Binding Screws | | Contact Pressure | 100 grams minimum | | Contact Resistance | 5 milliohms maximum | | Insulation Resistance | 500 mega ohms minimum | | Current/Voltage | 140 VDC @ 2 amps |
Additional Documents
|
|
The switch jack from Suttle allows two providers' service to be controlled
at the first jack in series through a simple, customer-operable
switch. This jack eliminates the need for service truck rolls and jack
re-wiring when the service is changed by the home owner. Intended
for daisy chained retrofit applications.
|
|
SU-625S2SM50
Duplex Surfact Mnt Switch Jack
Ivory |
|
For ordering information, please see this item on our current website.
|
|
|
|
|
SU-625S2SM85
Duplex Surface Mnt Switch Jack
White |
|
For ordering information, please see this item on our current website.
|
|
|
|
|
SU-630S11252
Single Line Switch Jack
Electrical Ivory, 2-conductor
With Auxiliary Jack |
|
For ordering information, please see this item on our current website.
|
|
|
|
|
SU-630S152
Single Line Switch Jack
Electrical Ivory, 2-conductor |
|
For ordering information, please see this item on our current website.
|
|
|
|
|
SU-630S21252
Dual Line Switch Jack
Electrical Ivory, 4-conductor
With Auxiliary Jack |
|
For ordering information, please see this item on our current website.
|
|
|
|
|
SU-630S252
Dual Line Switch Jack
Electrical Ivory, 4-conductor |
|
For ordering information, please see this item on our current website.
|
|
|
|
|
2-3001S-xx
Smooth Finish Jack Plate |
|
|---|
Features- Control Access from the front of the jack with switches for both line 1 & line 2
- Wire it once - no rewiring required if service turned back to incumbent
- Switch can be performed by customer
- Switch is inset 0.05" below faceplate to avoid accidental switching
- Plastic wall and PCB provide added protection from damage to wires and switches during installation
- Available in single and dual port options.
- Customizable for your name/logo - Reinforce your brand at the visible point of service
- Smooth, sleek design matches electrical faceplates.
- Available in single and dual jack options
Specifications
| Contacts | 50 microinch hard gold plating minimum | | Terminals | Binding Screws | | Contact Pressure | 100 grams minimum | | Contact Resistance | 5 milliohms maximum | | Insulation Resistance | 500 megaohms minimum | | Current/Voltage | 125 VDC @ 2 amps |
Additional Documents
|
|
This jack is designed for a competitive service provider to distribute voice service via a residential gateway (i.e., EMTA, or
phone adapter) through a home's existing wiring. The jack must be terminated at the demarcation point where the
incoming wire enters the customer's premise (first jack in series). The incumbent service provider's incoming wires are
terminated to the blunt cut leads using the butt splice connectors. Premise wires to the screws on the back of the terminal
block. All jacks connected in series from this jack will be controlled through this switched jack.
|
|
|
650Sxxx
Dual Provider Switch NID |
|
|---|
Features- Customer-operable switches for line one and line two.
- Wire it once - no rewiring required if service is turned back to the incumbent.
- Weather Resistant Enclosure.
Specifications
| Terminals | Binding Screws | | Contact Pressure | 100 grams minimum | | Contact Resistance | 5 milliohms maximum | | Insulation Resistance | 500 mega ohms minimum | | Current/Voltage | 140 VDC @ 2 amps |
Additional Documents
|
|
The Switch NID from Suttle allows two providers' service to be
controlled at the premise distribution device through a simple,
customer-operable switch. The Switch NID eliminates the need for
service truck rolls and jack re-wiring when the service is changed
by the home owner. Intended for Star Wired/Home Run/Daisy
Chain with a distribution device applications.
|
|
|
625ILS52
Dual Provider Inline Switch |
|
|---|
Features- Customer-operable switches for line one and line two.
- Wire it once - no rewiring required if service is turned back to the incumbent.
- Switches are inset below front face to avoid accidental switching.
Specifications
| Current/Voltage | 125 VDC @ .5 amp |
Additional Documents
|
|
The Inline Switch from Suttle allows two providers' service to be controlled
at the premise distribution device through a simple, customeroperable
switch. The Inline Switch eliminates the need for service truck
rolls and jack re-wiring when the service is changed by the home owner.
Intended for Star Wired/Home Run/Daisy Chain with a distribution
device applications.
|
|
|
RJSET
RJ31X Block and Cord |
|
|---|
- USOC RJ31X 8 pin modular surface mount jack.
- Built-in pass through shorting bars when plug is removed.
- Connector pins are plated with 50 microns of gold.
- Includes self adhesive foam mounting pad.
- 2 ft. 8 wire modular cord with plug on one end and spade terminals on the other.
- FCC approved - UL listed as a Communication Circuit Accessory.
- Packaged in a clear poly bag.
- Wiring instructions.
| |
The ELK-RJSET is for use with Alarm System Communicators, Line Fault devices, or other equipment as a means of connecting to the incoming telephone line. Includes USOC RJ31X 8 pin modular surface mount jack and 2 ft. 8 wire modular cord with plug on one end and spade terminals on the other.
| |
|
41018IQS
RJ31X Jack |
See Inside
|
|---|
- Standard RJ-31X Wiring. Diagram
- Shorting bars connect incoming and outgoing line when plug is removed.
- Use with security systems that "seize" the phone line.
- Built-in 66-block connections for quick and easy installation.
- Includes mounting screws, small double-stick pad, and large double-stick pad.
- Openings and strain-relief provided for rear and both side exits.
- Application Note
|
Note: If AOL told you to order this part to fix your DSL, this is probably not the part you need.
See our application note for the correct part.
|
BW-8
RJ31X Plug to Screw Terminal Adapter |
|---|
|
For those situations where you need an RJ31X plug on the end of a four-conductor "quad" wire. Faster, easier, and more reliable than crimping a modular plug onto the quad wire.
You can now use the new BW-8 Adapter to quickly plug the phone line into panels that have on-board RJ-31-X female jacks. This item is very useful in connecting phone line inputs to Fire Control panels, many burglary panels, and accessory modules.
The BW-8 has the patented BW terminal block on one end, and the standard 8 pin RJ-31-X style male plug on the other end.
| |
|
40223-S
Wall-Mount Phone Jack |
|
|---|
- Type 630A Quick-Connect 4-conductor jack with stainless steel wallplate.
- Mounting "rivets" hold any standard wall-mountable phone.
- Includes 4 conductor jack with quick-connect terminals, stainless steel screw-on wallplate, mounting screws.
- UL Listed, CSA Certified.
- Mounts in standard single-gang wallbox or directly to wall (with proper hardware).
- Complete set even includes plastic 110 punchdown tool. PICTURE
| |
|
CMJP1
Wall-Mount Phone Jack |
|
|---|
- Use for Mounting Wall-Type Phones
- Single Modular Flush Wall Jack
- For New Construction or Conversion from Existing Modular Instruments
- Screw-In Terminals for Easy Installation
- Mounts to Standard Electrical Box
- Color Matching Mounting Screws Included
- Patented. UL Listed.
| |
|
40215-W
Out-of-Sight Powerjack |
|
|---|
- Input Voltage: 120V AC, 60Hz, 8.5W
- Output Voltage (Switched with Slide Switch): 9.85V DC +/- 7% (For Cordless Phones rated between 7 to 9V DC @ 660 mA max.) 12.85V DC +/- 7% (For Cordless Phones rated between 9.1 to 12V DC @ 500 mA max.)
- Agency Standards: UL Listed STD 1863, FCC Part 68 and FCC part 15 Sub-part B Class B
- Installation Manual (PDF)
|
|
Want a REALLY cordless, cordless phone?
Leviton’s Out-of-Sight PowerJack™ is the solution.
Features and Benefits:
- The Out-of-Sight PowerJack™ has a unique patent-pending design that features a hideaway power supply.
- The Out-of-Sight PowerJack allows placement of cordless phones, answering machines and combination units wherever
customers may want rather than being restricted to installations nearest an existing electrical outlet
- User-adjustable voltage settings (7-9 or 9.1-12V DC) accommodate wall-mounted cordless phones, answering
machines and combination units powered by a DC power source ranging from 7 to 12V DC
- Regulated output voltage keeps the output voltage stable at any point along the input voltage range (96 to135V AC)
- Over-current, over-temperature and short-circuit protection provide safety and reliability
- High-efficiency and low stand-by mode power dissipation. The typical steady state (with load) power consumption
is 8.5 @ 74% efficiency. Typical standby mode (no load) power dissipation is 0.12W
- Six universal adapters are included, allowing the Out-of-Sight PowerJack to work with most cordless phones. Other
sizes and styles are also available from Leviton or your local electronic devices dealers
- Available in popular White
Leviton’s new Out-of-Sight PowerJack™ is a unique 4-wire telephone jack providing a low-voltage power supply that installs behind cordless wall phones, answering machines and combination units. No more unsightly dangling cords and bulky transformers to interfere with décor. The Out-of-Sight PowerJack installs in a standard wall box and is the same size as standard wall-mounted phone jacks. All unsightly wires tuck neatly behind the phone for a streamlined look. It features user-adjustable voltage settings, accommodating cordless phones (ranging from 7 to 12V DC) and comes with six universal plug adapters. It is perfect in new or newly remodeled construction and can be retrofitted to existing installations. Available only from Leviton, the Out-of-Sight PowerJack sets a new standard for combining technology and residential design.
The new Out-of-Sight PowerJack™, exclusively from Leviton,
does away with dangling, unsightly phone cords.
| |
|
CMWP1
ColorMate Phone Jack |
|
|---|
- Single Modular Flush Wall Jack
- Use for Connection of Plug-Ended Modular Line Cords
- For New Construction or Conversion from Existing Modular Instruments
- Screw-In Terminals for Easy Installation
- Mounting Screws Included
| |
Clever color coding allows you to match colors to Category 5 style color coding OR old-style four-conductor colors!
|
| |
|
CMTJ4
ColorMate Surface Mount Phone Jack |
|
|---|
- Use for Installation of Modular Telephone, Fax Machines and Answering Machines
- Mounts to Wall or Baseboard
- Mounting Screws Included
- Patented. UL Listed.
| |
Clever color coding allows you to match colors to Category 5 style color coding OR old-style four-conductor colors!
| |
|
WPW-PDC
WPA-PDC
WPI-PDC
Structured Wire Termination Wall Plates |
|
|---|
- Cat5e performance
- Pre-assembled
- Individual Line Break Out
- White, Ivory and Almond
- Superior connectivity
- Quicker installation and
termination
- No extra parts needed and no
unsightly external boxes
- Standard colors
- Greater bandwidth and
signal integrity
- Fewer stocking SKUs
- Access to individual lines
for phone fax and
computer
- Fits in any decor
| |
The ChannelPlus series WP wall plates offer four unique alternatives to
traditional snap port wall plates. The WP series is the latest introductions
available in the ChannelPlus structured wire line of products. All of the
WP series offer a choice of color, White, Ivory and Almond, along with
the fastest termination connection available. Offering a wide stable base
and self-mapping port assignments. The WP series is a complete solution
to data, telephone and video distribution termination.
The WPW-PDC offers two line break out, one Cat5e RJ-45 and two knock
outs for use with coax barrel connectors
|
|
CP-WPWPDC
Wallplate, Decora Strap, White
1xRJ45, 2xRJ14, 2xCoax |
|
For ordering information, please see this item on our current website. |
|
|
|
|
|
CP-WPAPDC
Wallplate, Decora Strap,Almond
1xRJ45, 2xRJ14, 2xCoax |
|
For ordering information, please see this item on our current website. |
|
|
|
|
|
CP-WPIPDC
Wallplate, Decora Strap, Ivory
1xRJ45, 2xRJ14, 2xCoax |
|
For ordering information, please see this item on our current website. |
|
|
|
|
|
WPW-DP
Structured Wire Termination Wall Plates |
|
|---|
- Cat5e performance
- Pre-assembled
- Individual Line Break Out
- White, Ivory and Almond
- Superior connectivity
- Quicker installation and termination
- No extra parts needed and no unsightly external boxes
- Standard colors
- Greater bandwidth and signal integrity
- Fewer stocking SKUs
- Access to individual lines for phone fax and computer
- Fits in any decor
| |
The ChannelPlus series WP wall plates offer four unique alternatives to
traditional snap port wall plates. The WP series is the latest introductions
available in the ChannelPlus structured wire line of products. All of the
WP series offer a choice of color, White, Ivory and Almond, along with
the fastest termination connection available. Offering a wide stable base
and self-mapping port assignments. The WP series is a complete solution
to data, telephone and video distribution termination.
The WPW-DP offers four line break out and one Cat5e RJ-45.
| |
|
|
