Testing & Verification
400-008
Twisted Pair and Coax Wiring Test Set |
|
|---|
- Compact and simple to use.
- Tests wiring for 568a, 568b, 10base-t, token ring, rj45, and rj11.
- Diagnoses: normal, reversal, short within pair, short between pairs, open and
transposed pairs.
- Also tests coaxial cable for shorts and opens.
- A must for any phone/network installer!
- Includes carrying case.
- See our tutorial on testing low-voltage wiring!
| | The 400008 tester is used to verifiy or indicate wiring errors on 4 pair voice and data channels. The continually sequencing led display provides instant indication of any shorts, opens, reversals, or miswires. The tester requires a nine-volt battery. The master and remote units provide end-to-end testing of installed cabling. Use the tester to check each channel back to the main distribution frame, verify cross connections, and test all line cords. Also use the tester to verify coaxial cabling from the headend to each outlet.
Improved model: Now with separate rj11 test jack, power button that won't get accidentally turned on, better shield testing, and snap-together cases.
| |
|
TP500
LanRoverTM |
|
|---|
- For use only while phone/network/coax lines are de-energized.
- Tests phone and and network cable wiring.
- Can inject tone for tracing with an inductive toner.
- Instruction Manual (PDF)
- Includes
- TP500 LanRover
- TP56 12in. Cable Assembly, RJ45 to RJ45
- PC150 Cordura Pouch
- Cable test results displayed on main unit and remote unit, in less than 2 seconds after plugging in the cable
- Auto-on and auto-off when testing cables, just plug both ends into tester!
- Snap-together case for easy storage and convenient patch cable testing
- Tone generator mode for use with tone tracers, auto-off
- Debug mode with from/to and failures for each pair
- Test for short, opens, miswires, reversals and split pairs
- Battery low indicator
| |
Offers a new price/performance level for verification of wiring faults and configurations on all your data cables.
| |
|
TP350
Testifier All Cable Tester
|
![]()
![]()
![]()
|
|---|
- Condition: Testifier shows Opens, Shorts, Miswires, Split Pairs, PASS and FAIL results fast - on a clear, full alpha/numeric LCD display.
- Location: Testifier is supported by the most comprehensive set of wiremapping locators in the world. Up to 20 cable end locations at a time can be identified and tagged.
- Position: Testifier's built-in tone generator is the most flexible and function-packed tone generator you will ever use. Its configurable signal can be generated to find and fix the position on any type of cable - either exposed or hidden, in ceilings or behind walls.
- Instruction manual (PDF)
| |
|
33-856
VDV MultiMedia Cable Tester Kit |
|
|---|
- Comprehensive testing for Voice, Data and Video applications.
- Desinged for testing in residential and commercial environments.
- Supports RJ11/12, RJ45, and coax F-Connector cabling and interfaces.
- Easy-to-read LCD display with PASS/Miswire indicators, wiremap display and troubleshooting modes.
- Multi-tone support for cable tracing and fault isolation.
- Convenient internal storage for remote.
- Capacity to support additional remotes.
- For use only while phone/network/coax lines are de-energized.
- Instruction Manual (PDF)
| |
|
TP600
LanRover Pro Network Testing Kit |
Also available in a Kit With 8 Remote Identifiers
|
|---|
- For use only while phone and network lines are de-energized.
- Measures cable length as a stand-alone function
- Tests phone and network cable wiring.
- Use as a locator with optional room identifier sets.
- Can inject tone (selectable tones and pair) for tracing with an inductive toner.
- Test for short, opens, miswires, reversals and split pairs
- Identifies multiple faults clearly without interpretation
- Clear wiremapping form displayed in 2-line, 16-character LCD display
- Auto-off/Auto-on. Up to 10 times better battery life than other testers
- One-ended testing with Pre-test mode for fast results
- Instruction Manual (PDF)
- Includes
- TP600 LanRover Pro
- TP40 12in. Cable Assembly, RJ45 to two alligator clips
- TP56 12in. (Qty 2) Cable Assembly, unshielded RJ45
- PC150 Cordura Pouch
| |
This high-performance length measurement CAT 5/6 tester identifies multiple faults clearly without interpretation for fast results; clear wiremapping form displayed on 2-line, 16-character LCD display; and measures cable length
| |
|
TP400
Speaker Seeker Kit |
|
|---|
- The Speaker Seeker™ wiremaps speaker and security/alarm wire up to 20 individual runs at a time by using 20 wiremap remotes. Each remote is specially wired with alligator clips to attach to unterminated paired cable ends.
- Simply touch to unterminated ends of the cable run to the contact points of the Speaker Seeker™. Results in the LED readout display the unique number of the remote identifier attached to the other end.
- Coax cables can be identified by attaching the coax alligator clip adapter to the coax jack on the Speaker Seeker™. Then the cable can be identified by using either an unterminated remote identifier (included) or a coax remote identifier available for purchase separately.
- The Speaker Seeker™ offers the installer a quick and accurate way to map speaker, security/alarm, and coax wire.
- Instruction Manual (PDF)
- Includes
- TP400 Speaker Seeker unit
- LB32 Push-On F coax connector with alligator clips
- TP315 Set of 20 speaker remotes
- Instruction manual
| |
|
|
Also available in a 
