This is the old HomeTech Solutions website.
Please visit our new website here

DSS Multiswitches & Diplexers

Zinwell WB68 and WB616 are the only multi switches compatible with Mpeg 4 Satellite dish systems!
This page contains various devices used to connect a DSS Satellite receiver or receivers to a satellite dish.

For more information about multiswitches and selection, see our Multiswitch Selection Table. For a tutorial on the various ways of connecting a DSS dish to one or more receivers, click here.


Zinwell Multiswitches
6-In 8-Out Ku/Ka Multiswitch
6-In 16-Out Multiswitch


Channel Vision Multiswitches
3-In 4-Out, Non-Powered, Amplified
5-In 8-Out, Powered, Amplified


Pico-Macom Multiswitches
5-In 4-Out Powered Amplified


Eagle Aspen Multiswitches
3-In 8-Out
5-In 8-Out Powered Amplified


Steren Multiswitches
3-In 8-Out, Weatherproof
3-In 8-Out
4-In 4-Out, Weatherproof
4-In 8-Out, Weatherproof
5-In 4-Out
5-In 8-Out

 
Terk Multiswitches
5-In 8-Out


Generic Multiswitches
3-In 4-Out


Diplexers
VHF, VHF Diplexer/Mixer
VHF, UHF, CATV Diplexer/Mixer
5 x 8 Integrated Multi-Switch


Related Links
Spaun Satellite Products
DSS Accessories
DSS Signal Level Meters
Video Modulators
Satellite Dishes

Multiswitches

A multiswitch is required whenever you connect more than two DSS receivers to a single Dual-LNB dish, or you connect multiple receivers to a multiple satellite dish or multiple dishes. For a complete description of multiswitches and various connection diagrams, click here.

Multiswitch Selection Table

Not UHF/VHF
Amplified
Unpowered
UHF/VHF/CATV
Amplified
Unpowered
UHF/VHF/CATV
Amplified
Powered
3 in 4 out GC-DTV3X4 CV-MS34A
-
3 in 8 out EA-S2180CE
ST-201737 ST-201738
- -
4 in 4 out ST-201744 - -
4 in 8 out - - ST-201747
5 in 4 out ST-202550 - PI-TSMS21505
5 in 8 out ST-202058 - EA-S4180GX
CV-HD58
TE-BMS58
SP-SMS5802
5 in 12 out - - SP-SMS51202
5 in 16 out - - SP-SMS51602

Zinwell Multiswitches


HomeTech Solutions
WB-616
Wide-Band 6x16 Multiswitch
  • Ka/Ku Compatible
  • Suplies signals for up to 16 receiver connections
  • Compatible with single or multi satellite systems
  • Operating frequency: 150 ~ 2150 MHz
  • Indoor/ outdoor use
  • Included parts:
    • WB616
    • AC/DC Power Module
    • F-F Adapter
Now; less expensive Terk version available!

GC-WB616
Zinwell 6x16 Multiswitch
Designed for DIRECTV
MPEG-4 compression HD
For ordering information, please see this item on our current website.  


HomeTech Solutions
WB-68
Wide-Band Ku/Ka 6x8 Multi-Switch

Bigger Picture
  • DirecTV Approved Wide-Band Ku/Ka 6x8 multi-switch.
  • WB-68 is mainly designed to connect 99°/101°/103°/110°/119° DirecTV satellites for upto 8 receiver reception. Flex Port 1 and Flex Port 2 are used for 72.5° and/or 95° satellite reception.
  • WB-68 is not cascadable.
  • Support Ka/Ku-Band
  • DirecTV Approved
  • Excellent Isolation
  • Light Weight Design
  • Waterproof guaranteed
  • Installation Instructions (PDF)
GC-WB68
Zinwell 6x8 Multiswitch
Designed for DIRECTV
MPEG-4 compression HD
For ordering information, please see this item on our current website.  


This is the old HomeTech Solutions website.
Please visit our new website here

Channel Vision Multiswitches


MS34A
3-In 4-Out Amplified Multiswitch
  • Powered by satellite receivers.
  • UHF/VHF/CATV amplified.
  • Bi-directional for cable modem (5-42MHz return path)
  • Thru loss, LNB: 4dB
  • Thru gain, UHF/VHF/CATV: 5dB
  • Combines a cable carrying VHF/UHF signals (from an antenna or CATV) with both cables from a dual LNB, DSS satellite dish.
  • Outputs for up to four runs to satellite receivers. (Requires TSDM2150 or SAT-D2 below at locations where both satellite and VHF/UHF/CATV signals are desired.)
CV-MS34A
Multiswitch, 4-way
For ordering information, please see this item on our current website.  


HD58
5-In 8-Out Powered, Amplified, Multiswitch
  • Powered by included power supply..
  • UHF/VHF/CATV amplified.
  • Combines a cable carrying VHF/UHF signals (from an antenna or CATV) with all four cables from a dual satellite dish.
  • Outputs for up to eight runs to satellite receivers. (Requires TSDM2150 or SAT-D2 below at locations where both satellite and VHF/UHF/CATV signals are desired.)
  • Note1: When used in tandem with another multiswitch, including multiswitches integrated into the satellite dish, you must install two 22kHz tone generators (CV-22T) on the high side of this multiswitch.
  • Note 2: DirecTV compatible. Does not work with Dish Network.
  • Includes 2 22KHz tone generators for use with LNBs with a built-in multiswitch.
CV-HD58
Multiswitch, 5 in, 8 out, HDTV
Amplified ant and sat, powered
For ordering information, please see this item on our current website.  


This is the old HomeTech Solutions website.
Please visit our new website here

Pico-Macom Multiswitches

Click For Manufacturer Information
Pico Macom / Tru-Spec
Authorized Pico Macom Dealer
TSMS-2150-5/4
5 In 4 Out Multiswitch
  • Hughes DirectDuo Multiswitch.
  • DirecTV compatible.
  • Built-In UHF/VHF amplifier.
  • Power Supply: 24VDC, 1A (Included)
  • Power supply connnects via separate coaxial cable. (Not included.)
  • Insertion Loss, 950 - 2150 MHz: 0dB
  • Gain, 40 - 806 MHz: 2 dB
  • Weather resistant


This is the old HomeTech Solutions website.
Please visit our new website here

Terk Multiswitches

Click For Manufacturer Information
Terk Technologies
Authorized Terk Dealer
BMS-58
5 x 8 Integrated Multi-Switch
  • Easily connect up to eight satellite receivers to your satellite dish
  • Connect an additional off air antenna or cable input.
  • Save time by not having to remove integrated multi-switches embedded in your satellite dish.
  • Can be used indoors and outdoors
  • To view full specs click here
With the TERK BMS-58 5x8 multi-switch, you can install your home theater multiplex in no time by connecting up to eight receivers with ease. There is no need to remove integrated multi-switches already embedded in your satellite dish. Simply connect the two SatA and SatB cables inputs to the BMS-58 and run your receiver outputs to the rooms you want. The BMS-58 has an ultra-low noise built-in amplifier to eliminate signal loss and deliver the best possible reception to every TV in the home. It features DC pass capability allowing it to be used with amplified antennas that require DC power via a coaxial cable. The TERK BMS-58 is designed to be waterproof making it rugged, durable and easy-to-install.
TE-BMS58
Multiswitch,5in,8out,HDTV
UHF/VHF Amplified,Powered
For ordering information, please see this item on our current website.  


This is the old HomeTech Solutions website.
Please visit our new website here

Eagle Aspen Multiswitches

Click For Manufacturer Information
Eagle Aspen aka
Pro Brand International, Inc.
Authorized PBI Reseller
S-4180-GX+
5 in, 8 out Amplified Multiswitch
4 LNBF and one UHF/VHF inputs and 8 outputs. For use with DIRECTV elliptical dish dual or triple satellite systems.
EA-S4180GX
Multiswitch, 5in, 8 out
Powered, Amplified
For ordering information, please see this item on our current website.  

Click For Manufacturer Information
Eagle Aspen aka
Pro Brand International, Inc.
Authorized PBI Reseller
S-2180-CE
3 in, 8 out Multiswitch

This low cost, high quality multi-switch features 2 LNB and 1 UHF/VHF input and 8 outputs. Utilizes state of art diode switching to ensure long life. New Mini Max diecast case and surface mount technology ensure excellent insertion loss, plug-in return loss, and isolation specifications. Optional F power supply provides 13V/18V to LNB for installations requiring 150' + cable run.
EA-S2180CE
Multiswitch, 3in, 8 out
For ordering information, please see this item on our current website.  
EA-POWER2140
P/S for Eagle Aspen S2180
Multiswitch
For ordering information, please see this item on our current website.  


This is the old HomeTech Solutions website.
Please visit our new website here

Steren Multiswitches

Click For Manufacturer Information
Steren Electronics, LLC.
201-737
3 in, 8 out Multiswitch
  • Premium grade multi-receiver satellite multiswitch
  • Ideal for residential, home theater, MDU and commercial applications
  • Suitable for DirecTV
  • Combines 2 LNB and 1 antenna input
  • Enables independent operation of up to 8 receivers
  • High performance pin-diode signal switching
  • State-of-the-art surface mount technology
  • Robust nickel-plated cast zinc housing
  • Weatherproof epoxy sealed housing
  • Ultra low resistance silver-plated contacts
  • Precision machined F-port threads
  • Excellent attenuation, reflection and isolation
  • 40-2300MHz passband frequency
  • Powered by receiver
  • Specifications (PDF)
ST-201737
3x8 Satellite IF Multiswitch
UHF/VHF Not Amplified
DirecTV Compatible
For ordering information, please see this item on our current website.  

Click For Manufacturer Information
Steren Electronics, LLC.
201-738
3 in, 8 Multiswitch
  • Multi-Receiver Satellite Multiswitch
  • Designed for Residential and Commercial Applications
  • Multiswitch allows independent operation of multiple satellite receivers using a single dish
  • Combines 2 satellite LNB and 1 off-air TV antenna inputs to any satellite receiver
  • Routes any input to any output using 13-14V vertical or 17-18V horizontal polarities
  • SMD Multiple-Layered Printed Circuit Board Design
  • High-Performance Pin-Diode Signal Switching
  • Precision Machined F-Connector Threads
  • Impedance 75˝ – 60mA DC Current Consumption
  • Current Pass 500mA max.
  • Terrestrial Ports Frequency 5-862MHz
  • Satellite Port Frequency 950-2200MHz
  • Supplied with Protective F-Port Plastic Caps
  • 3x8 Satellite Multiswitch
  • Isolation 30dB – Return Loss 8dB
  • Insertion Loss: 6dB Sat, 15dB Terr
  • Optional 18VDC 500mA Power Supply Sold Separately (201-739)
ST-201738
3x8 Satellite IF Multiswitches
UHF/VHF Not Amplified
For ordering information, please see this item on our current website.  
ST-201739
Optional Power Supply For
201738 Multiswitch
For ordering information, please see this item on our current website.  

Click For Manufacturer Information
Steren Electronics, LLC.
201-744
4 in, 4 out Dish Mount Multiswitch
  • 22kHz Heavy-Duty Multi-LNB Multiswitch
  • Designed for Residential and Commercial Applications
  • Suitable for HDTV and DirecTV-Para-Todos Feeds
  • Multiswitch allows independent operation of multiple satellite receivers using a single dish
  • Combines up to 4 satellite LNB inputs to any satellite receiver
  • Routes any LNB input to any output using 13-14V vertical or 17-18V horizontal polarities and 0-22kHz set at the receiver
  • SMD Multiple-Layered Printed Circuit Board Design
  • High-Performance Pin-Diode Signal Switching
  • Heavy-Duty Plastic Covered Cast Aluminum Housing
  • Precision Machined F-Connector Threads
  • Satellite Port Frequency 950-2200MHz – 75˝ Imped.
  • Supplied with Protective F-Port Plastic Caps
  • Insertion Loss 5dB
  • Isolation 30dB
  • Return Loss 9dB
ST-201744
4x4 Satellite IF Multiswitches
Mast Mountable
For ordering information, please see this item on our current website.  

Click For Manufacturer Information
Steren Electronics, LLC.
201-747
4 in, 8 out Weatherproof Multiswitch
  • Premium grade multi-receiver satellite multiswitch
  • Ideal for residential, home theater, MDU and commercial applications
  • Suitable for DirecTV Phase III, HDTV and similar systems
  • Combines 4 LNB inputs
  • Enables independent operation of up to 8 receivers
  • High performance pin-diode signal switching
  • State-of-the-art surface mount technology
  • Robust nickel-plated cast zinc housing
  • Weatherproof epoxy sealed housing
  • Ultra low resistance silver-plated contacts
  • Precision machined F-port threads
  • Excellent attenuation, reflection and isolation
  • 950-2300MHz passband frequency
  • 24V power supply included
  • Specifications (PDF)
ST-201747
4x8 Satellite IF Multiswitch
DirecTV Compatible
For ordering information, please see this item on our current website.  

Click For Manufacturer Information
Steren Electronics, LLC.
202-550
5 in, 4 out Multiswitch
  • 22kHz Heavy-Duty Multi-LNB Multiswitch
  • Designed for Residential and Commercial Applications
  • Suitable for HDTV and DirecTV-Para-Todos Feeds
  • Multiswitch allows independent operation of multiple satellite receivers using a single dish
  • Combines up to 4 satellite LNB inputs and 1 off-air TV antenna inputs to any satellite receiver
  • Routes any LNB input to any output using 13-14V vertical or 17-18V horizontal polarities and 0-22kHz set at the receiver
  • SMD Multiple-Layered Printed Circuit Board Design
  • High-Performance Pin-Diode Signal Switching
  • Heavy-Duty Cast Aluminum Housing
  • Precision Machined F-Connector Threads
  • Satellite Port Frequency 950-2200MHz – 75˝ Imped.
  • Supplied with Protective F-Port Plastic Caps
  • 5x4 Satellite Multiswitch
  • Isolation 40dB – Return Loss 10dB
  • Insertion Loss: 10dB Sat, 16dB Terr
  • Rejection: 20dB Sat, 30dB Terr
  • DC Current Consumption 60mA
  • Current Pass 500mA max.

Click For Manufacturer Information
Steren Electronics, LLC.
202-058
5 in, 8 out Multiswitch
  • 22kHz Heavy-Duty Multi-LNB Multiswitch
  • Designed for Residential and Commercial Applications
  • Suitable for HDTV and DirecTV-Para-Todos Feeds
  • Multiswitch allows independent operation of multiple satellite receivers using a single dish
  • Combines up to 4 satellite LNB inputs and 1 off-air TV antenna inputs to any satellite receiver
  • Routes any LNB input to any output using 13-14V vertical or 17-18V horizontal polarities and 0-22kHz set at the receiver
  • SMD Multiple-Layered Printed Circuit Board Design
  • High-Performance Pin-Diode Signal Switching
  • Heavy-Duty Aluminum Housing
  • Precision Machined F-Connector Threads
  • Satellite Port Frequency 950-2200MHz – 75˝ Imped.
  • Supplied with Protective F-Port Plastic Caps
  • 5x8 SkySwitcher™ Multiswitch
  • Isolation 50dB – Return Loss 8-10dB
  • Insertion Loss 10dB Sat, 20dB Terr
  • Rejection 25-28dB – Flatness ±2dB
  • Noise Figure Sat 5dB Terr 6dB
  • Sat Output Level 85dBµV@35dB IMA 3
  • Terr Output Level 92dBµV@35dB IMA 3
  • Optional 24VDC 600mA Power Supply Sold Separately (201-749)
ST-202058
5x8 Satellite IF Multiswitch
Power Supply Optional (202749)
For ordering information, please see this item on our current website.  
ST-201749
Optional power supply for
202-058 Multiswitch
For ordering information, please see this item on our current website.  


This is the old HomeTech Solutions website.
Please visit our new website here

Generic Multiswitches


HomeTech Solutions
DTV3X4
3 in, 4 out Multiswitch

Models may vary.
  • 3 x 4 multi-switch.
  • 40 - 2150 MHz
  • DirecTV Approved
GC-DTV3X4
Multiswitch, 3in, 4 out
For ordering information, please see this item on our current website.  


This is the old HomeTech Solutions website.
Please visit our new website here

Diplexers

Click For Manufacturer Information
Pico Macom / Tru-Spec
Authorized Pico Macom Dealer
TSDM2150
VHF/UHF Diplexer/Mixer
  • Combine a cable carrying VHF/UHF signals (from an antenna or CATV) with the cable from the satellite dish, or
  • Split a cable carrying both types of signals into their separate components.
  • Looks and connects just like a regular splitter/combiner, but works with DSS signals!
PI-TSDM2150
VHF/UHF Diplexer Mixer
For ordering information, please see this item on our current website.  

Click For Manufacturer Information
Eagle Aspen aka
Pro Brand International, Inc.
Authorized PBI Reseller
D2200
VHF/UHF Diplexer/Mixer
  • Combine a cable carrying VHF/UHF signals (from an antenna or CATV) with the cable from the satellite dish, or
  • Split a cable carrying both types of signals into their separate components.
  • Looks and connects just like a regular splitter/combiner, but works with DSS signals!
EA-D2200
Diplexer
For ordering information, please see this item on our current website.  


SAT-D2 VHF/UHF/CATV Diplexer/Mixer
  • Combine a cable carrying signals from an antenna or CATV with the cable from the satellite dish, or
  • Split a cable carrying both types of signals into their separate components.
  • Looks and connects just like a regular splitter/combiner, but works with DSS signals!
CV-SAT-D2
Diplexer, Channel Vision
For ordering information, please see this item on our current website.  


This is the old HomeTech Solutions website.
Please visit our new website here

Copyright © 1992-2008 HomeTech Solutions. All Rights Reserved.